Go to most recent revision | Blame | Last modification | View Log | RSS feed
#! /bin/sh
# Guess values for system-dependent variables and create Makefiles.
# Generated by GNU Autoconf 2.61.
#
# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
# This configure script is free software; the Free Software Foundation
# gives unlimited permission to copy, distribute and modify it.
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
case $0 in
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
{ (exit 1); exit 1; }
fi
# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
for as_var in \
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# CDPATH.
$as_unset CDPATH
if test "x$CONFIG_SHELL" = x; then
if (eval ":") 2>/dev/null; then
as_have_required=yes
else
as_have_required=no
fi
if test $as_have_required = yes && (eval ":
(as_func_return () {
(exit \$1)
}
as_func_success () {
as_func_return 0
}
as_func_failure () {
as_func_return 1
}
as_func_ret_success () {
return 0
}
as_func_ret_failure () {
return 1
}
exitcode=0
if as_func_success; then
:
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
:
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
:
else
exitcode=1
echo positional parameters were not saved.
fi
test \$exitcode = 0) || { (exit 1); exit 1; }
(
as_lineno_1=\213
as_lineno_2=\214
test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" &&
test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; }
") 2> /dev/null; then
:
else
as_candidate_shells=
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
case $as_dir in
/*)
for as_base in sh bash ksh sh5; do
as_candidate_shells="$as_candidate_shells $as_dir/$as_base"
done;;
esac
done
IFS=$as_save_IFS
for as_shell in $as_candidate_shells $SHELL; do
# Try only shells that exist, to save several forks.
if { test -f "$as_shell" || test -f "$as_shell.exe"; } &&
{ ("$as_shell") 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
:
_ASEOF
}; then
CONFIG_SHELL=$as_shell
as_have_required=yes
if { "$as_shell" 2> /dev/null <<\_ASEOF
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
:
(as_func_return () {
(exit $1)
}
as_func_success () {
as_func_return 0
}
as_func_failure () {
as_func_return 1
}
as_func_ret_success () {
return 0
}
as_func_ret_failure () {
return 1
}
exitcode=0
if as_func_success; then
:
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
:
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = "$1" ); then
:
else
exitcode=1
echo positional parameters were not saved.
fi
test $exitcode = 0) || { (exit 1); exit 1; }
(
as_lineno_1=328
as_lineno_2=329
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; }
_ASEOF
}; then
break
fi
fi
done
if test "x$CONFIG_SHELL" != x; then
for as_var in BASH_ENV ENV
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
export CONFIG_SHELL
exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"}
fi
if test $as_have_required = no; then
echo This script requires a shell more modern than all the
echo shells that I found on your system. Please install a
echo modern shell, or manually run the script under such a
echo shell if you do have one.
{ (exit 1); exit 1; }
fi
fi
fi
(eval "as_func_return () {
(exit \$1)
}
as_func_success () {
as_func_return 0
}
as_func_failure () {
as_func_return 1
}
as_func_ret_success () {
return 0
}
as_func_ret_failure () {
return 1
}
exitcode=0
if as_func_success; then
:
else
exitcode=1
echo as_func_success failed.
fi
if as_func_failure; then
exitcode=1
echo as_func_failure succeeded.
fi
if as_func_ret_success; then
:
else
exitcode=1
echo as_func_ret_success failed.
fi
if as_func_ret_failure; then
exitcode=1
echo as_func_ret_failure succeeded.
fi
if ( set x; as_func_ret_success y && test x = \"\$1\" ); then
:
else
exitcode=1
echo positional parameters were not saved.
fi
test \$exitcode = 0") || {
echo No shell found that supports shell functions.
echo Please tell autoconf@gnu.org about your system,
echo including any error possibly output before this
echo message
}
as_lineno_1=423
as_lineno_2=424
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with 428
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line after each line using 430; the second 'sed'
# does the real work. The second script uses 'N' to pair each
# line-number line with the line containing 432, and appends
# trailing '-' during substitution so that 433 is not a special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
# E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
case `echo 'x\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
*) ECHO_C='\c';;
esac;;
*)
ECHO_N='-n';;
esac
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$1"; then
test -d "$1/.";
else
case $1 in
-*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
fi
as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
# Check that we are running under the correct shell.
SHELL=${CONFIG_SHELL-/bin/sh}
case X$ECHO in
X*--fallback-echo)
# Remove one level of quotation (which was required for Make).
ECHO=`echo "$ECHO" | sed 's,\\\\\$\\$0,'$0','`
;;
esac
echo=${ECHO-echo}
if test "X$1" = X--no-reexec; then
# Discard the --no-reexec flag, and continue.
shift
elif test "X$1" = X--fallback-echo; then
# Avoid inline document here, it may be left over
:
elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then
# Yippee, $echo works!
:
else
# Restart under the correct shell.
exec $SHELL "$0" --no-reexec ${1+"$@"}
fi
if test "X$1" = X--fallback-echo; then
# used as fallback echo
shift
cat <<EOF
$*
EOF
exit 0
fi
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
if test -z "$ECHO"; then
if test "X${echo_test_string+set}" != Xset; then
# find a string as large as possible, as long as the shell can cope with it
for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do
# expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ...
if (echo_test_string="`eval $cmd`") 2>/dev/null &&
echo_test_string="`eval $cmd`" &&
(test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null
then
break
fi
done
fi
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
:
else
# The Solaris, AIX, and Digital Unix default echo programs unquote
# backslashes. This makes it impossible to quote backslashes using
# echo "$something" | sed 's/\\/\\\\/g'
#
# So, first we look for a working echo in the user's PATH.
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for dir in $PATH /usr/ucb; do
IFS="$lt_save_ifs"
if (test -f $dir/echo || test -f $dir/echo$ac_exeext) &&
test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$dir/echo"
break
fi
done
IFS="$lt_save_ifs"
if test "X$echo" = Xecho; then
# We didn't find a better echo, so look for alternatives.
if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# This shell has a builtin print -r that does the trick.
echo='print -r'
elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) &&
test "X$CONFIG_SHELL" != X/bin/ksh; then
# If we have ksh, try running configure again with it.
ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
export ORIGINAL_CONFIG_SHELL
CONFIG_SHELL=/bin/ksh
export CONFIG_SHELL
exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"}
else
# Try using printf.
echo='printf %s\n'
if test "X`($echo '\t') 2>/dev/null`" = 'X\t' &&
echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
# Cool, printf works
:
elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL
export CONFIG_SHELL
SHELL="$CONFIG_SHELL"
export SHELL
echo="$CONFIG_SHELL $0 --fallback-echo"
elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` &&
test "X$echo_testing_string" = 'X\t' &&
echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` &&
test "X$echo_testing_string" = "X$echo_test_string"; then
echo="$CONFIG_SHELL $0 --fallback-echo"
else
# maybe with a smaller string...
prev=:
for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do
if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null
then
break
fi
prev="$cmd"
done
if test "$prev" != 'sed 50q "$0"'; then
echo_test_string=`eval $prev`
export echo_test_string
exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"}
else
# Oops. We lost completely, so just stick with echo.
echo=echo
fi
fi
fi
fi
fi
fi
# Copy echo and quote the copy suitably for passing to libtool from
# the Makefile, instead of quoting the original, which is used later.
ECHO=$echo
if test "X$ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then
ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo"
fi
tagnames=${tagnames+${tagnames},}CXX
tagnames=${tagnames+${tagnames},}F77
exec 7<&0 </dev/null 6>&1
# Name of the host.
# hostname on some systems (SVR3.2, Linux) returns a bogus exit status,
# so uname gets run too.
ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q`
#
# Initializations.
#
ac_default_prefix=/usr/local
ac_clean_files=
ac_config_libobj_dir=.
LIBOBJS=
cross_compiling=no
subdirs=
MFLAGS=
MAKEFLAGS=
SHELL=${CONFIG_SHELL-/bin/sh}
# Identity of this package.
PACKAGE_NAME=
PACKAGE_TARNAME=
PACKAGE_VERSION=
PACKAGE_STRING=
PACKAGE_BUGREPORT=
ac_unique_file="acinclude.m4"
ac_default_prefix=${KDEDIR:-the kde prefix}
# Factoring default headers for most tests.
ac_includes_default="\
#include <stdio.h>
#ifdef HAVE_SYS_TYPES_H
# include <sys/types.h>
#endif
#ifdef HAVE_SYS_STAT_H
# include <sys/stat.h>
#endif
#ifdef STDC_HEADERS
# include <stdlib.h>
# include <stddef.h>
#else
# ifdef HAVE_STDLIB_H
# include <stdlib.h>
# endif
#endif
#ifdef HAVE_STRING_H
# if !defined STDC_HEADERS && defined HAVE_MEMORY_H
# include <memory.h>
# endif
# include <string.h>
#endif
#ifdef HAVE_STRINGS_H
# include <strings.h>
#endif
#ifdef HAVE_INTTYPES_H
# include <inttypes.h>
#endif
#ifdef HAVE_STDINT_H
# include <stdint.h>
#endif
#ifdef HAVE_UNISTD_H
# include <unistd.h>
#endif"
ac_subst_vars='SHELL
PATH_SEPARATOR
PACKAGE_NAME
PACKAGE_TARNAME
PACKAGE_VERSION
PACKAGE_STRING
PACKAGE_BUGREPORT
exec_prefix
prefix
program_transform_name
bindir
sbindir
libexecdir
datarootdir
datadir
sysconfdir
sharedstatedir
localstatedir
includedir
oldincludedir
docdir
infodir
htmldir
dvidir
pdfdir
psdir
libdir
localedir
mandir
DEFS
ECHO_C
ECHO_N
ECHO_T
LIBS
build_alias
host_alias
target_alias
build
build_cpu
build_vendor
build_os
host
host_cpu
host_vendor
host_os
target
target_cpu
target_vendor
target_os
INSTALL_PROGRAM
INSTALL_SCRIPT
INSTALL_DATA
CYGPATH_W
PACKAGE
VERSION
ACLOCAL
AUTOCONF
AUTOMAKE
AUTOHEADER
MAKEINFO
install_sh
STRIP
INSTALL_STRIP_PROGRAM
mkdir_p
AWK
SET_MAKE
am__leading_dot
AMTAR
am__tar
am__untar
KDECONFIG
kde_libs_prefix
kde_libs_htmldir
CONF_FILES
CC
CFLAGS
LDFLAGS
CPPFLAGS
ac_ct_CC
EXEEXT
OBJEXT
DEPDIR
am__include
am__quote
AMDEP_TRUE
AMDEP_FALSE
AMDEPBACKSLASH
CCDEPMODE
am__fastdepCC_TRUE
am__fastdepCC_FALSE
CPP
CXX
CXXFLAGS
ac_ct_CXX
CXXDEPMODE
am__fastdepCXX_TRUE
am__fastdepCXX_FALSE
WOVERLOADED_VIRTUAL
HAVE_GCC_VISIBILITY
unsermake_enable_pch_TRUE
unsermake_enable_pch_FALSE
USE_EXCEPTIONS
USE_RTTI
CXXCPP
NOOPT_CXXFLAGS
NOOPT_CFLAGS
ENABLE_PERMISSIVE_FLAG
LDFLAGS_AS_NEEDED
LDFLAGS_NEW_DTAGS
KDE_USE_FINAL_TRUE
KDE_USE_FINAL_FALSE
KDE_USE_CLOSURE_TRUE
KDE_USE_CLOSURE_FALSE
KDE_NO_UNDEFINED
KDE_USE_NMCHECK_TRUE
KDE_USE_NMCHECK_FALSE
GREP
EGREP
LN_S
ECHO
AR
RANLIB
F77
FFLAGS
ac_ct_F77
LIBTOOL
KDE_PLUGIN
KDE_CHECK_PLUGIN
MSGFMT
GMSGFMT
XGETTEXT
LIBUTIL
LIBCOMPAT
LIBCRYPT
LIBRESOLV
LIB_POLL
FRAMEWORK_COREAUDIO
LIBSOCKET
X_EXTRA_LIBS
LIBUCB
LIBDL
KDE_USE_FPIE
KDE_USE_PIE
include_x11_TRUE
include_x11_FALSE
XMKMF
X_PRE_LIBS
LIB_X11
LIB_XRENDER
LIBSM
X_INCLUDES
X_LDFLAGS
x_includes
x_libraries
QTE_NORTTI
LIB_XEXT
LIBPTHREAD
USE_THREADS
KDE_MT_LDFLAGS
KDE_MT_LIBS
USER_INCLUDES
USER_LDFLAGS
LIBZ
LIBPNG
LIBJPEG
qt_libraries
qt_includes
QT_INCLUDES
QT_LDFLAGS
PERL
MOC
UIC
UIC_TR
LIB_QT
LIB_QPE
kde_qtver
KDE_EXTRA_RPATH
KDE_RPATH
X_RPATH
kde_libraries
kde_includes
KDE_LDFLAGS
KDE_INCLUDES
all_includes
all_libraries
AUTODIRS
include_ARTS_TRUE
include_ARTS_FALSE
MAKEKDEWIDGETS
KCONFIG_COMPILER
KCFG_DEPENDENCIES
DCOPIDLNG
DCOPIDL
DCOPIDL2CPP
DCOP_DEPENDENCIES
MCOPIDL
ARTSCCONFIG
MEINPROC
KDE_XSL_STYLESHEET
XMLLINT
kde_htmldir
kde_appsdir
kde_icondir
kde_sounddir
kde_datadir
kde_locale
kde_confdir
kde_kcfgdir
kde_mimedir
kde_wallpaperdir
kde_bindir
xdg_appsdir
xdg_menudir
xdg_directorydir
kde_templatesdir
kde_servicesdir
kde_servicetypesdir
kde_moduledir
kdeinitdir
kde_styledir
kde_widgetdir
LIB_KDED
LIB_KDECORE
LIB_KDEUI
LIB_KIO
LIB_KJS
LIB_SMB
LIB_KAB
LIB_KABC
LIB_KHTML
LIB_KSPELL
LIB_KPARTS
LIB_KDEPRINT
LIB_KUTILS
LIB_KDEPIM
LIB_KIMPROXY
LIB_KNEWSTUFF
LIB_KDNSSD
LIB_KUNITTEST
LIB_KSYCOCA
LIB_KFILE
LIB_KFM
TOPSUBDIRS
LIBOBJS
LTLIBOBJS'
ac_subst_files=''
ac_precious_vars='build_alias
host_alias
target_alias
CC
CFLAGS
LDFLAGS
LIBS
CPPFLAGS
CPP
CXX
CXXFLAGS
CCC
CXXCPP
F77
FFLAGS
XMKMF'
# Initialize some variables set by options.
ac_init_help=
ac_init_version=false
# The variables have the same names as the options, with
# dashes changed to underlines.
cache_file=/dev/null
exec_prefix=NONE
no_create=
no_recursion=
prefix=NONE
program_prefix=NONE
program_suffix=NONE
program_transform_name=s,x,x,
silent=
site=
srcdir=
verbose=
x_includes=NONE
x_libraries=NONE
# Installation directory options.
# These are left unexpanded so users can "make install exec_prefix=/foo"
# and all the variables that are supposed to be based on exec_prefix
# by default will actually change.
# Use braces instead of parens because sh, perl, etc. also accept them.
# (The list follows the same order as the GNU Coding Standards.)
bindir='${exec_prefix}/bin'
sbindir='${exec_prefix}/sbin'
libexecdir='${exec_prefix}/libexec'
datarootdir='${prefix}/share'
datadir='${datarootdir}'
sysconfdir='${prefix}/etc'
sharedstatedir='${prefix}/com'
localstatedir='${prefix}/var'
includedir='${prefix}/include'
oldincludedir='/usr/include'
docdir='${datarootdir}/doc/${PACKAGE}'
infodir='${datarootdir}/info'
htmldir='${docdir}'
dvidir='${docdir}'
pdfdir='${docdir}'
psdir='${docdir}'
libdir='${exec_prefix}/lib'
localedir='${datarootdir}/locale'
mandir='${datarootdir}/man'
ac_prev=
ac_dashdash=
for ac_option
do
# If the previous option needs an argument, assign it.
if test -n "$ac_prev"; then
eval $ac_prev=\$ac_option
ac_prev=
continue
fi
case $ac_option in
*=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;;
*) ac_optarg=yes ;;
esac
# Accept the important Cygnus configure options, so we can diagnose typos.
case $ac_dashdash$ac_option in
--)
ac_dashdash=yes ;;
-bindir | --bindir | --bindi | --bind | --bin | --bi)
ac_prev=bindir ;;
-bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
bindir=$ac_optarg ;;
-build | --build | --buil | --bui | --bu)
ac_prev=build_alias ;;
-build=* | --build=* | --buil=* | --bui=* | --bu=*)
build_alias=$ac_optarg ;;
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
cache_file=$ac_optarg ;;
--config-cache | -C)
cache_file=config.cache ;;
-datadir | --datadir | --datadi | --datad)
ac_prev=datadir ;;
-datadir=* | --datadir=* | --datadi=* | --datad=*)
datadir=$ac_optarg ;;
-datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \
| --dataroo | --dataro | --datar)
ac_prev=datarootdir ;;
-datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \
| --dataroot=* | --dataroo=* | --dataro=* | --datar=*)
datarootdir=$ac_optarg ;;
-disable-* | --disable-*)
ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
eval enable_$ac_feature=no ;;
-docdir | --docdir | --docdi | --doc | --do)
ac_prev=docdir ;;
-docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*)
docdir=$ac_optarg ;;
-dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv)
ac_prev=dvidir ;;
-dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*)
dvidir=$ac_optarg ;;
-enable-* | --enable-*)
ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid feature name: $ac_feature" >&2
{ (exit 1); exit 1; }; }
ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'`
eval enable_$ac_feature=\$ac_optarg ;;
-exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
| --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
| --exec | --exe | --ex)
ac_prev=exec_prefix ;;
-exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
| --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
| --exec=* | --exe=* | --ex=*)
exec_prefix=$ac_optarg ;;
-gas | --gas | --ga | --g)
# Obsolete; use --with-gas.
with_gas=yes ;;
-help | --help | --hel | --he | -h)
ac_init_help=long ;;
-help=r* | --help=r* | --hel=r* | --he=r* | -hr*)
ac_init_help=recursive ;;
-help=s* | --help=s* | --hel=s* | --he=s* | -hs*)
ac_init_help=short ;;
-host | --host | --hos | --ho)
ac_prev=host_alias ;;
-host=* | --host=* | --hos=* | --ho=*)
host_alias=$ac_optarg ;;
-htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht)
ac_prev=htmldir ;;
-htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \
| --ht=*)
htmldir=$ac_optarg ;;
-includedir | --includedir | --includedi | --included | --include \
| --includ | --inclu | --incl | --inc)
ac_prev=includedir ;;
-includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
| --includ=* | --inclu=* | --incl=* | --inc=*)
includedir=$ac_optarg ;;
-infodir | --infodir | --infodi | --infod | --info | --inf)
ac_prev=infodir ;;
-infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
infodir=$ac_optarg ;;
-libdir | --libdir | --libdi | --libd)
ac_prev=libdir ;;
-libdir=* | --libdir=* | --libdi=* | --libd=*)
libdir=$ac_optarg ;;
-libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
| --libexe | --libex | --libe)
ac_prev=libexecdir ;;
-libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
| --libexe=* | --libex=* | --libe=*)
libexecdir=$ac_optarg ;;
-localedir | --localedir | --localedi | --localed | --locale)
ac_prev=localedir ;;
-localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*)
localedir=$ac_optarg ;;
-localstatedir | --localstatedir | --localstatedi | --localstated \
| --localstate | --localstat | --localsta | --localst | --locals)
ac_prev=localstatedir ;;
-localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
| --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*)
localstatedir=$ac_optarg ;;
-mandir | --mandir | --mandi | --mand | --man | --ma | --m)
ac_prev=mandir ;;
-mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
mandir=$ac_optarg ;;
-nfp | --nfp | --nf)
# Obsolete; use --without-fp.
with_fp=no ;;
-no-create | --no-create | --no-creat | --no-crea | --no-cre \
| --no-cr | --no-c | -n)
no_create=yes ;;
-no-recursion | --no-recursion | --no-recursio | --no-recursi \
| --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
no_recursion=yes ;;
-oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
| --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
| --oldin | --oldi | --old | --ol | --o)
ac_prev=oldincludedir ;;
-oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
| --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
| --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
oldincludedir=$ac_optarg ;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
prefix=$ac_optarg ;;
-program-prefix | --program-prefix | --program-prefi | --program-pref \
| --program-pre | --program-pr | --program-p)
ac_prev=program_prefix ;;
-program-prefix=* | --program-prefix=* | --program-prefi=* \
| --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
program_prefix=$ac_optarg ;;
-program-suffix | --program-suffix | --program-suffi | --program-suff \
| --program-suf | --program-su | --program-s)
ac_prev=program_suffix ;;
-program-suffix=* | --program-suffix=* | --program-suffi=* \
| --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
program_suffix=$ac_optarg ;;
-program-transform-name | --program-transform-name \
| --program-transform-nam | --program-transform-na \
| --program-transform-n | --program-transform- \
| --program-transform | --program-transfor \
| --program-transfo | --program-transf \
| --program-trans | --program-tran \
| --progr-tra | --program-tr | --program-t)
ac_prev=program_transform_name ;;
-program-transform-name=* | --program-transform-name=* \
| --program-transform-nam=* | --program-transform-na=* \
| --program-transform-n=* | --program-transform-=* \
| --program-transform=* | --program-transfor=* \
| --program-transfo=* | --program-transf=* \
| --program-trans=* | --program-tran=* \
| --progr-tra=* | --program-tr=* | --program-t=*)
program_transform_name=$ac_optarg ;;
-pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd)
ac_prev=pdfdir ;;
-pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*)
pdfdir=$ac_optarg ;;
-psdir | --psdir | --psdi | --psd | --ps)
ac_prev=psdir ;;
-psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*)
psdir=$ac_optarg ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
silent=yes ;;
-sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
ac_prev=sbindir ;;
-sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
| --sbi=* | --sb=*)
sbindir=$ac_optarg ;;
-sharedstatedir | --sharedstatedir | --sharedstatedi \
| --sharedstated | --sharedstate | --sharedstat | --sharedsta \
| --sharedst | --shareds | --shared | --share | --shar \
| --sha | --sh)
ac_prev=sharedstatedir ;;
-sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
| --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
| --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
| --sha=* | --sh=*)
sharedstatedir=$ac_optarg ;;
-site | --site | --sit)
ac_prev=site ;;
-site=* | --site=* | --sit=*)
site=$ac_optarg ;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=$ac_optarg ;;
-sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
| --syscon | --sysco | --sysc | --sys | --sy)
ac_prev=sysconfdir ;;
-sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
| --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
sysconfdir=$ac_optarg ;;
-target | --target | --targe | --targ | --tar | --ta | --t)
ac_prev=target_alias ;;
-target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
target_alias=$ac_optarg ;;
-v | -verbose | --verbose | --verbos | --verbo | --verb)
verbose=yes ;;
-version | --version | --versio | --versi | --vers | -V)
ac_init_version=: ;;
-with-* | --with-*)
ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=\$ac_optarg ;;
-without-* | --without-*)
ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'`
# Reject names that are not valid shell variable names.
expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid package name: $ac_package" >&2
{ (exit 1); exit 1; }; }
ac_package=`echo $ac_package | sed 's/[-.]/_/g'`
eval with_$ac_package=no ;;
--x)
# Obsolete; use --with-x.
with_x=yes ;;
-x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
| --x-incl | --x-inc | --x-in | --x-i)
ac_prev=x_includes ;;
-x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
| --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
x_includes=$ac_optarg ;;
-x-libraries | --x-libraries | --x-librarie | --x-librari \
| --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
ac_prev=x_libraries ;;
-x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
| --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
x_libraries=$ac_optarg ;;
-*) { echo "$as_me: error: unrecognized option: $ac_option
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; }
;;
*=*)
ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='`
# Reject names that are not valid shell variable names.
expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null &&
{ echo "$as_me: error: invalid variable name: $ac_envvar" >&2
{ (exit 1); exit 1; }; }
eval $ac_envvar=\$ac_optarg
export $ac_envvar ;;
*)
# FIXME: should be removed in autoconf 3.0.
echo "$as_me: WARNING: you should use --build, --host, --target" >&2
expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null &&
echo "$as_me: WARNING: invalid host type: $ac_option" >&2
: ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option}
;;
esac
done
if test -n "$ac_prev"; then
ac_option=--`echo $ac_prev | sed 's/_/-/g'`
{ echo "$as_me: error: missing argument to $ac_option" >&2
{ (exit 1); exit 1; }; }
fi
# Be sure to have absolute directory names.
for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \
datadir sysconfdir sharedstatedir localstatedir includedir \
oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
libdir localedir mandir
do
eval ac_val=\$$ac_var
case $ac_val in
[\\/$]* | ?:[\\/]* ) continue;;
NONE | '' ) case $ac_var in *prefix ) continue;; esac;;
esac
{ echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2
{ (exit 1); exit 1; }; }
done
# There might be people who depend on the old broken behavior: `$host'
# used to hold the argument of --host etc.
# FIXME: To remove some day.
build=$build_alias
host=$host_alias
target=$target_alias
# FIXME: To remove some day.
if test "x$host_alias" != x; then
if test "x$build_alias" = x; then
cross_compiling=maybe
echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used." >&2
elif test "x$build_alias" != "x$host_alias"; then
cross_compiling=yes
fi
fi
ac_tool_prefix=
test -n "$host_alias" && ac_tool_prefix=$host_alias-
test "$silent" = yes && exec 6>/dev/null
ac_pwd=`pwd` && test -n "$ac_pwd" &&
ac_ls_di=`ls -di .` &&
ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` ||
{ echo "$as_me: error: Working directory cannot be determined" >&2
{ (exit 1); exit 1; }; }
test "X$ac_ls_di" = "X$ac_pwd_ls_di" ||
{ echo "$as_me: error: pwd does not report name of working directory" >&2
{ (exit 1); exit 1; }; }
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
ac_srcdir_defaulted=yes
# Try the directory containing this script, then the parent directory.
ac_confdir=`$as_dirname -- "$0" ||
$as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$0" : 'X\(//\)[^/]' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$0" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
srcdir=$ac_confdir
if test ! -r "$srcdir/$ac_unique_file"; then
srcdir=..
fi
else
ac_srcdir_defaulted=no
fi
if test ! -r "$srcdir/$ac_unique_file"; then
test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .."
{ echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2
{ (exit 1); exit 1; }; }
fi
ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work"
ac_abs_confdir=`(
cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2
{ (exit 1); exit 1; }; }
pwd)`
# When building in place, set srcdir=.
if test "$ac_abs_confdir" = "$ac_pwd"; then
srcdir=.
fi
# Remove unnecessary trailing slashes from srcdir.
# Double slashes in file names in object file debugging info
# mess up M-x gdb in Emacs.
case $srcdir in
*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;;
esac
for ac_var in $ac_precious_vars; do
eval ac_env_${ac_var}_set=\${${ac_var}+set}
eval ac_env_${ac_var}_value=\$${ac_var}
eval ac_cv_env_${ac_var}_set=\${${ac_var}+set}
eval ac_cv_env_${ac_var}_value=\$${ac_var}
done
#
# Report the --help message.
#
if test "$ac_init_help" = "long"; then
# Omit some internal or obsolete options to make the list less imposing.
# This message is too long to be a string in the A/UX 3.1 sh.
cat <<_ACEOF
\`configure' configures this package to adapt to many kinds of systems.
Usage: $0 [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print \`checking...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for \`--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or \`..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[$ac_default_prefix]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, \`make install' will install all the files in
\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify
an installation prefix other than \`$ac_default_prefix' using \`--prefix',
for instance \`--prefix=\$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
_ACEOF
cat <<\_ACEOF
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
_ACEOF
fi
if test -n "$ac_init_help"; then
cat <<\_ACEOF
Optional Features:
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--disable-fast-perl disable fast Makefile generation (needs perl)
--enable-debug=ARG enables debug symbols (yes|no|full) default=no
--disable-debug disables debug output and debug symbols default=no
--enable-strict compiles with strict compiler options (may not
work!)
--disable-warnings disables compilation with -Wall and similar
--enable-profile creates profiling infos default=no
--disable-dependency-tracking speeds up one-time build
--enable-dependency-tracking do not reject slow dependency extractors
--enable-pch enables precompiled header support (currently only
KCC or gcc >=3.4+unsermake) default=no
--enable-coverage use gcc coverage testing
--enable-new-ldflags enable the new linker flags
--enable-final build size optimized apps (experimental - needs lots
of memory)
--enable-closure delay template instantiation
--enable-nmcheck enable automatic namespace cleanness check
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=no]
--enable-libsuffix /lib directory suffix (64,32,none,auto=default)
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-pie platform supports PIE linking default=detect
--enable-embedded link to Qt-embedded, don't use X
--enable-qtopia link to Qt-embedded, link to the Qtopia Environment
--enable-mac link to Qt/Mac (don't use X)
--disable-mt link to non-threaded Qt (deprecated)
--disable-threading disables threading even if libpthread found
--disable-rpath do not use the rpath feature of ld
--disable-path-check don't try to find out, where to install
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-tags[=TAGS] include additional configurations [automatic]
--with-extra-includes=DIR
adds non standard include paths
--with-extra-libs=DIR adds non standard library paths
--with-qt-dir=DIR where the root of Qt is installed
--with-qt-includes=DIR where the Qt includes are.
--with-qt-libraries=DIR where the Qt library is installed.
--without-arts build without aRts default=no
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
CXX C++ compiler command
CXXFLAGS C++ compiler flags
CXXCPP C++ preprocessor
F77 Fortran 77 compiler command
FFLAGS Fortran 77 compiler flags
XMKMF Path to xmkmf, Makefile generator for X Window System
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
_ACEOF
ac_status=$?
fi
if test "$ac_init_help" = "recursive"; then
# If there are subdirs, report their specific --help.
for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue
test -d "$ac_dir" || continue
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
cd "$ac_dir" || { ac_status=$?; continue; }
# Check for guested configure.
if test -f "$ac_srcdir/configure.gnu"; then
echo &&
$SHELL "$ac_srcdir/configure.gnu" --help=recursive
elif test -f "$ac_srcdir/configure"; then
echo &&
$SHELL "$ac_srcdir/configure" --help=recursive
else
echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2
fi || ac_status=$?
cd "$ac_pwd" || { ac_status=$?; break; }
done
fi
test -n "$ac_init_help" && exit $ac_status
if $ac_init_version; then
cat <<\_ACEOF
configure
generated by GNU Autoconf 2.61
Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001,
2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
This configure script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it.
_ACEOF
exit
fi
cat >config.log <<_ACEOF
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by $as_me, which was
generated by GNU Autoconf 2.61. Invocation command line was
$ $0 $@
_ACEOF
exec 5>>config.log
{
cat <<_ASUNAME
## --------- ##
## Platform. ##
## --------- ##
hostname = `(hostname || uname -n) 2>/dev/null | sed 1q`
uname -m = `(uname -m) 2>/dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown`
/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown`
/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown`
/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown`
/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown`
_ASUNAME
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
echo "PATH: $as_dir"
done
IFS=$as_save_IFS
} >&5
cat >&5 <<_ACEOF
## ----------- ##
## Core tests. ##
## ----------- ##
_ACEOF
# Keep a trace of the command line.
# Strip out --no-create and --no-recursion so they do not pile up.
# Strip out --silent because we don't want to record it for future runs.
# Also quote any args containing shell meta-characters.
# Make two passes to allow for proper duplicate-argument suppression.
ac_configure_args=
ac_configure_args0=
ac_configure_args1=
ac_must_keep_next=false
for ac_pass in 1 2
do
for ac_arg
do
case $ac_arg in
-no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil)
continue ;;
*\'*)
ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
case $ac_pass in
1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;;
2)
ac_configure_args1="$ac_configure_args1 '$ac_arg'"
if test $ac_must_keep_next = true; then
ac_must_keep_next=false # Got value, back to normal.
else
case $ac_arg in
*=* | --config-cache | -C | -disable-* | --disable-* \
| -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \
| -q | -quiet | --q* | -silent | --sil* | -v | -verb* \
| -with-* | --with-* | -without-* | --without-* | --x)
case "$ac_configure_args0 " in
"$ac_configure_args1"*" '$ac_arg' "* ) continue ;;
esac
;;
-* ) ac_must_keep_next=true ;;
esac
fi
ac_configure_args="$ac_configure_args '$ac_arg'"
;;
esac
done
done
$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; }
$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; }
# When interrupted or exit'd, cleanup temporary files, and complete
# config.log. We remove comments because anyway the quotes in there
# would cause problems or look ugly.
# WARNING: Use '\'' to represent an apostrophe within the trap.
# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug.
trap 'exit_status=$?
# Save into config.log some information that might help in debugging.
{
echo
cat <<\_ASBOX
## ---------------- ##
## Cache variables. ##
## ---------------- ##
_ASBOX
echo
# The following way of writing the cache mishandles newlines in values,
(
for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { echo "$as_me:1875: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
sed -n \
"s/'\''/'\''\\\\'\'''\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p"
;; #(
*)
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
)
echo
cat <<\_ASBOX
## ----------------- ##
## Output variables. ##
## ----------------- ##
_ASBOX
echo
for ac_var in $ac_subst_vars
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
echo "$ac_var='\''$ac_val'\''"
done | sort
echo
if test -n "$ac_subst_files"; then
cat <<\_ASBOX
## ------------------- ##
## File substitutions. ##
## ------------------- ##
_ASBOX
echo
for ac_var in $ac_subst_files
do
eval ac_val=\$$ac_var
case $ac_val in
*\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;;
esac
echo "$ac_var='\''$ac_val'\''"
done | sort
echo
fi
if test -s confdefs.h; then
cat <<\_ASBOX
## ----------- ##
## confdefs.h. ##
## ----------- ##
_ASBOX
echo
cat confdefs.h
echo
fi
test "$ac_signal" != 0 &&
echo "$as_me: caught signal $ac_signal"
echo "$as_me: exit $exit_status"
} >&5
rm -f core *.core core.conftest.* &&
rm -f -r conftest* confdefs* conf$$* $ac_clean_files &&
exit $exit_status
' 0
for ac_signal in 1 2 13 15; do
trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal
done
ac_signal=0
# confdefs.h avoids OS command line length limits that DEFS can exceed.
rm -f -r conftest* confdefs.h
# Predefined preprocessor variables.
cat >>confdefs.h <<_ACEOF
#define PACKAGE_NAME "$PACKAGE_NAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_TARNAME "$PACKAGE_TARNAME"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_VERSION "$PACKAGE_VERSION"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_STRING "$PACKAGE_STRING"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT"
_ACEOF
# Let the site file select an alternate cache file if it wants to.
# Prefer explicitly selected file to automatically selected ones.
if test -n "$CONFIG_SITE"; then
set x "$CONFIG_SITE"
elif test "x$prefix" != xNONE; then
set x "$prefix/share/config.site" "$prefix/etc/config.site"
else
set x "$ac_default_prefix/share/config.site" \
"$ac_default_prefix/etc/config.site"
fi
shift
for ac_site_file
do
if test -r "$ac_site_file"; then
{ echo "$as_me:2000: loading site script $ac_site_file" >&5
echo "$as_me: loading site script $ac_site_file" >&6;}
sed 's/^/| /' "$ac_site_file" >&5
. "$ac_site_file"
fi
done
if test -r "$cache_file"; then
# Some versions of bash will fail to source /dev/null (special
# files actually), so we avoid doing that.
if test -f "$cache_file"; then
{ echo "$as_me:2011: loading cache $cache_file" >&5
echo "$as_me: loading cache $cache_file" >&6;}
case $cache_file in
[\\/]* | ?:[\\/]* ) . "$cache_file";;
*) . "./$cache_file";;
esac
fi
else
{ echo "$as_me:2019: creating cache $cache_file" >&5
echo "$as_me: creating cache $cache_file" >&6;}
>$cache_file
fi
# Check that the precious variables saved in the cache have kept the same
# value.
ac_cache_corrupted=false
for ac_var in $ac_precious_vars; do
eval ac_old_set=\$ac_cv_env_${ac_var}_set
eval ac_new_set=\$ac_env_${ac_var}_set
eval ac_old_val=\$ac_cv_env_${ac_var}_value
eval ac_new_val=\$ac_env_${ac_var}_value
case $ac_old_set,$ac_new_set in
set,)
{ echo "$as_me:2034: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5
echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;}
ac_cache_corrupted=: ;;
,set)
{ echo "$as_me:2038: error: \`$ac_var' was not set in the previous run" >&5
echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;}
ac_cache_corrupted=: ;;
,);;
*)
if test "x$ac_old_val" != "x$ac_new_val"; then
{ echo "$as_me:2044: error: \`$ac_var' has changed since the previous run:" >&5
echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;}
{ echo "$as_me:2046: former value: $ac_old_val" >&5
echo "$as_me: former value: $ac_old_val" >&2;}
{ echo "$as_me:2048: current value: $ac_new_val" >&5
echo "$as_me: current value: $ac_new_val" >&2;}
ac_cache_corrupted=:
fi;;
esac
# Pass precious variables to config.status.
if test "$ac_new_set" = set; then
case $ac_new_val in
*\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;;
*) ac_arg=$ac_var=$ac_new_val ;;
esac
case " $ac_configure_args " in
*" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy.
*) ac_configure_args="$ac_configure_args '$ac_arg'" ;;
esac
fi
done
if $ac_cache_corrupted; then
{ echo "$as_me:2066: error: changes in the environment can compromise the build" >&5
echo "$as_me: error: changes in the environment can compromise the build" >&2;}
{ { echo "$as_me:2068: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5
echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
ac_aux_dir=
for ac_dir in admin "$srcdir"/admin; do
if test -f "$ac_dir/install-sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install-sh -c"
break
elif test -f "$ac_dir/install.sh"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/install.sh -c"
break
elif test -f "$ac_dir/shtool"; then
ac_aux_dir=$ac_dir
ac_install_sh="$ac_aux_dir/shtool install -c"
break
fi
done
if test -z "$ac_aux_dir"; then
{ { echo "$as_me:2113: error: cannot find install-sh or install.sh in admin \"$srcdir\"/admin" >&5
echo "$as_me: error: cannot find install-sh or install.sh in admin \"$srcdir\"/admin" >&2;}
{ (exit 1); exit 1; }; }
fi
# These three variables are undocumented and unsupported,
# and are intended to be withdrawn in a future Autoconf release.
# They can cause serious problems if a builder's source tree is in a directory
# whose full name contains unusual characters.
ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var.
ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var.
ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var.
unset CDPATH
# Make sure we can run config.sub.
$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 ||
{ { echo "$as_me:2132: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5
echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;}
{ (exit 1); exit 1; }; }
{ echo "$as_me:2136: checking build system type" >&5
echo $ECHO_N "checking build system type... $ECHO_C" >&6; }
if test "${ac_cv_build+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_build_alias=$build_alias
test "x$ac_build_alias" = x &&
ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"`
test "x$ac_build_alias" = x &&
{ { echo "$as_me:2145: error: cannot guess build type; you must specify one" >&5
echo "$as_me: error: cannot guess build type; you must specify one" >&2;}
{ (exit 1); exit 1; }; }
ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` ||
{ { echo "$as_me:2149: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
{ echo "$as_me:2154: result: $ac_cv_build" >&5
echo "${ECHO_T}$ac_cv_build" >&6; }
case $ac_cv_build in
*-*-*) ;;
*) { { echo "$as_me:2158: error: invalid value of canonical build" >&5
echo "$as_me: error: invalid value of canonical build" >&2;}
{ (exit 1); exit 1; }; };;
esac
build=$ac_cv_build
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_build
shift
build_cpu=$1
build_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
build_os=$*
IFS=$ac_save_IFS
case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac
{ echo "$as_me:2176: checking host system type" >&5
echo $ECHO_N "checking host system type... $ECHO_C" >&6; }
if test "${ac_cv_host+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$host_alias" = x; then
ac_cv_host=$ac_cv_build
else
ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` ||
{ { echo "$as_me:2185: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
{ echo "$as_me:2191: result: $ac_cv_host" >&5
echo "${ECHO_T}$ac_cv_host" >&6; }
case $ac_cv_host in
*-*-*) ;;
*) { { echo "$as_me:2195: error: invalid value of canonical host" >&5
echo "$as_me: error: invalid value of canonical host" >&2;}
{ (exit 1); exit 1; }; };;
esac
host=$ac_cv_host
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_host
shift
host_cpu=$1
host_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
host_os=$*
IFS=$ac_save_IFS
case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac
{ echo "$as_me:2213: checking target system type" >&5
echo $ECHO_N "checking target system type... $ECHO_C" >&6; }
if test "${ac_cv_target+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$target_alias" = x; then
ac_cv_target=$ac_cv_host
else
ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` ||
{ { echo "$as_me:2222: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5
echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
{ echo "$as_me:2228: result: $ac_cv_target" >&5
echo "${ECHO_T}$ac_cv_target" >&6; }
case $ac_cv_target in
*-*-*) ;;
*) { { echo "$as_me:2232: error: invalid value of canonical target" >&5
echo "$as_me: error: invalid value of canonical target" >&2;}
{ (exit 1); exit 1; }; };;
esac
target=$ac_cv_target
ac_save_IFS=$IFS; IFS='-'
set x $ac_cv_target
shift
target_cpu=$1
target_vendor=$2
shift; shift
# Remember, the first character of IFS is used to create $*,
# except with old shells:
target_os=$*
IFS=$ac_save_IFS
case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac
# The aliases save the names the user supplied, while $host etc.
# will get canonicalized.
test -n "$target_alias" &&
test "$program_prefix$program_suffix$program_transform_name" = \
NONENONEs,x,x, &&
program_prefix=${target_alias}-
test "$program_prefix" != NONE &&
program_transform_name="s&^&$program_prefix&;$program_transform_name"
# Use a double $ so make ignores it.
test "$program_suffix" != NONE &&
program_transform_name="s&\$&$program_suffix&;$program_transform_name"
# Double any \ or $. echo might interpret backslashes.
# By default was `s,x,x', remove it if useless.
cat <<\_ACEOF >conftest.sed
s/[\\$]/&&/g;s/;s,x,x,$//
_ACEOF
program_transform_name=`echo $program_transform_name | sed -f conftest.sed`
rm -f conftest.sed
am__api_version="1.9"
test -n "$INSTALL" && kde_save_INSTALL_given=$INSTALL
test -n "$INSTALL_PROGRAM" && kde_save_INSTALL_PROGRAM_given=$INSTALL_PROGRAM
test -n "$INSTALL_SCRIPT" && kde_save_INSTALL_SCRIPT_given=$INSTALL_SCRIPT
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SysV /etc/install, /usr/sbin/install
# SunOS /usr/etc/install
# IRIX /sbin/install
# AIX /bin/install
# AmigaOS /C/install, which installs bootblocks on floppy discs
# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
# AFS /usr/afsws/bin/install, which mishandles nonexistent args
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# OS/2's system install, which has a completely different semantic
# ./install, which can be erroneously created by make from ./install.sh.
{ echo "$as_me:2289: checking for a BSD-compatible install" >&5
echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; }
if test -z "$INSTALL"; then
if test "${ac_cv_path_install+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
# Account for people who put trailing slashes in PATH elements.
case $as_dir/ in
./ | .// | /cC/* | \
/etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \
?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \
/usr/ucb/* ) ;;
*)
# OSF1 and SCO ODT 3.0 have their own names for install.
# Don't use installbsd from OSF since it installs stuff as root
# by default.
for ac_prog in ginstall scoinst install; do
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then
if test $ac_prog = install &&
grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# AIX install. It has an incompatible calling convention.
:
elif test $ac_prog = install &&
grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then
# program-specific install script used by HP pwplus--don't use.
:
else
ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c"
break 3
fi
fi
done
done
;;
esac
done
IFS=$as_save_IFS
fi
if test "${ac_cv_path_install+set}" = set; then
INSTALL=$ac_cv_path_install
else
# As a last resort, use the slow shell script. Don't cache a
# value for INSTALL within a source directory, because that will
# break other packages using the cache if that directory is
# removed, or if the value is a relative name.
INSTALL=$ac_install_sh
fi
fi
{ echo "$as_me:2345: result: $INSTALL" >&5
echo "${ECHO_T}$INSTALL" >&6; }
# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
if test -z "$kde_save_INSTALL_given" ; then
# OK, user hasn't given any INSTALL, autoconf found one for us
# now we test, if it supports the -p flag
{ echo "$as_me:2360: checking for -p flag to install" >&5
echo $ECHO_N "checking for -p flag to install... $ECHO_C" >&6; }
rm -f confinst.$$.* > /dev/null 2>&1
echo "Testtest" > confinst.$$.orig
ac_res=no
if ${INSTALL} -p confinst.$$.orig confinst.$$.new > /dev/null 2>&1 ; then
if test -f confinst.$$.new ; then
# OK, -p seems to do no harm to install
INSTALL="${INSTALL} -p"
ac_res=yes
fi
fi
rm -f confinst.$$.*
{ echo "$as_me:2373: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test -z "$kde_save_INSTALL_PROGRAM_given" ; then
INSTALL_PROGRAM='${INSTALL} $(INSTALL_STRIP_FLAG)'
fi
if test -z "$kde_save_INSTALL_SCRIPT_given" ; then
INSTALL_SCRIPT='${INSTALL}'
fi
{ echo "$as_me:2384: checking whether build environment is sane" >&5
echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; }
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments. Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
if test "$*" = "X"; then
# -L didn't work.
set X `ls -t $srcdir/configure conftest.file`
fi
rm -f conftest.file
if test "$*" != "X $srcdir/configure conftest.file" \
&& test "$*" != "X conftest.file $srcdir/configure"; then
# If neither matched, then we have a broken ls. This can happen
# if, for instance, CONFIG_SHELL is bash and it inherits a
# broken ls alias from the environment. This has actually
# happened. Such a system could not be considered "sane".
{ { echo "$as_me:2408: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&5
echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken
alias in your environment" >&2;}
{ (exit 1); exit 1; }; }
fi
test "$2" = conftest.file
)
then
# Ok.
:
else
{ { echo "$as_me:2421: error: newly created file is older than distributed files!
Check your system clock" >&5
echo "$as_me: error: newly created file is older than distributed files!
Check your system clock" >&2;}
{ (exit 1); exit 1; }; }
fi
{ echo "$as_me:2427: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
# expand $ac_aux_dir to an absolute path
am_aux_dir=`cd $ac_aux_dir && pwd`
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
am_missing_run="$MISSING --run "
else
am_missing_run=
{ echo "$as_me:2438: WARNING: \`missing' script is too old or missing" >&5
echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;}
fi
if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
# We used to keeping the `.' as first argument, in order to
# allow $(mkdir_p) to be used without argument. As in
# $(mkdir_p) $(somedir)
# where $(somedir) is conditionally defined. However this is wrong
# for two reasons:
# 1. if the package is installed by a user who cannot write `.'
# make install will fail,
# 2. the above comment should most certainly read
# $(mkdir_p) $(DESTDIR)$(somedir)
# so it does not work when $(somedir) is undefined and
# $(DESTDIR) is not.
# To support the latter case, we have to write
# test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
# so the `.' trick is pointless.
mkdir_p='mkdir -p --'
else
# On NextStep and OpenStep, the `mkdir' command does not
# recognize any option. It will interpret all options as
# directories to create, and then abort because `.' already
# exists.
for d in ./-p ./--version;
do
test -d $d && rmdir $d
done
# $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
if test -f "$ac_aux_dir/mkinstalldirs"; then
mkdir_p='$(mkinstalldirs)'
else
mkdir_p='$(install_sh) -d'
fi
fi
for ac_prog in gawk mawk nawk awk
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:2479: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_AWK+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$AWK"; then
ac_cv_prog_AWK="$AWK" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AWK="$ac_prog"
echo "$as_me:2495: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AWK=$ac_cv_prog_AWK
if test -n "$AWK"; then
{ echo "$as_me:2506: result: $AWK" >&5
echo "${ECHO_T}$AWK" >&6; }
else
{ echo "$as_me:2509: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$AWK" && break
done
{ echo "$as_me:2517: checking whether ${MAKE-make} sets \$(MAKE)" >&5
echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; }
set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'`
if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.make <<\_ACEOF
SHELL = /bin/sh
all:
@echo '@@@%%%=$(MAKE)=@@@%%%'
_ACEOF
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
case `${MAKE-make} -f conftest.make 2>/dev/null` in
*@@@%%%=?*=@@@%%%*)
eval ac_cv_prog_make_${ac_make}_set=yes;;
*)
eval ac_cv_prog_make_${ac_make}_set=no;;
esac
rm -f conftest.make
fi
if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then
{ echo "$as_me:2538: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
SET_MAKE=
else
{ echo "$as_me:2542: result: no" >&5
echo "${ECHO_T}no" >&6; }
SET_MAKE="MAKE=${MAKE-make}"
fi
rm -rf .tst 2>/dev/null
mkdir .tst 2>/dev/null
if test -d .tst; then
am__leading_dot=.
else
am__leading_dot=_
fi
rmdir .tst 2>/dev/null
# test to see if srcdir already configured
if test "`cd $srcdir && pwd`" != "`pwd`" &&
test -f $srcdir/config.status; then
{ { echo "$as_me:2559: error: source directory already configured; run \"make distclean\" there first" >&5
echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;}
{ (exit 1); exit 1; }; }
fi
# test whether we have cygpath
if test -z "$CYGPATH_W"; then
if (cygpath --version) >/dev/null 2>/dev/null; then
CYGPATH_W='cygpath -w'
else
CYGPATH_W=echo
fi
fi
# Define the identity of the package.
PACKAGE=sportwatcher
VERSION=0.1
cat >>confdefs.h <<_ACEOF
#define PACKAGE "$PACKAGE"
_ACEOF
cat >>confdefs.h <<_ACEOF
#define VERSION "$VERSION"
_ACEOF
# Some tools Automake needs.
ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"}
AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"}
AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"}
AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"}
MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"}
install_sh=${install_sh-"$am_aux_dir/install-sh"}
# Installed binaries are usually stripped using `strip' when the user
# run `make install-strip'. However `strip' might not be the right
# tool to use in cross-compilation environments, therefore Automake
# will honor the `STRIP' environment variable to overrule this program.
if test "$cross_compiling" != no; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ echo "$as_me:2614: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
echo "$as_me:2630: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ echo "$as_me:2641: result: $STRIP" >&5
echo "${ECHO_T}$STRIP" >&6; }
else
{ echo "$as_me:2644: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ echo "$as_me:2654: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
echo "$as_me:2670: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ echo "$as_me:2681: result: $ac_ct_STRIP" >&5
echo "${ECHO_T}$ac_ct_STRIP" >&6; }
else
{ echo "$as_me:2684: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:2693: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
fi
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
# We need awk for the "check" target. The system "awk" is bad on
# some platforms.
# Always define AMTAR for backward compatibility.
AMTAR=${AMTAR-"${am_missing_run}tar"}
am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'
unset CDPATH
kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs"
if test -n "$KDEDIRS"; then
kde_save_IFS=$IFS
IFS=:
for dir in $KDEDIRS; do
kde_default_bindirs="$dir/bin $kde_default_bindirs "
done
IFS=$kde_save_IFS
fi
if test "x$prefix" = "xNONE"; then
{ echo "$as_me:2740: checking for kde-config" >&5
echo $ECHO_N "checking for kde-config... $ECHO_C" >&6; }
if test -n "$KDECONFIG"; then
kde_cv_path="$KDECONFIG";
else
kde_cache=`echo kde-config | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z "prepend"; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/kde-config"; then
if test -n ""
then
evalstr="$dir/kde-config 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/kde-config"
break
fi
else
kde_cv_path="$dir/kde-config"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:2790: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:2793: error: The important program kde-config was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program kde-config was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:2802: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
KDECONFIG=$kde_cv_path
fi
else
kde_save_PATH="$PATH"
PATH="$exec_prefix/bin:$prefix/bin:$PATH"
{ echo "$as_me:2812: checking for kde-config" >&5
echo $ECHO_N "checking for kde-config... $ECHO_C" >&6; }
if test -n "$KDECONFIG"; then
kde_cv_path="$KDECONFIG";
else
kde_cache=`echo kde-config | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z "prepend"; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/kde-config"; then
if test -n ""
then
evalstr="$dir/kde-config 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/kde-config"
break
fi
else
kde_cv_path="$dir/kde-config"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:2862: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:2865: error: The important program kde-config was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program kde-config was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:2874: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
KDECONFIG=$kde_cv_path
fi
PATH="$kde_save_PATH"
fi
kde_libs_prefix=`$KDECONFIG --prefix`
if test -z "$kde_libs_prefix" || test ! -x "$kde_libs_prefix"; then
{ { echo "$as_me:2885: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
This means it has been moved since you installed it.
This won't work. Please recompile kdelibs for the new prefix.
" >&5
echo "$as_me: error: $KDECONFIG --prefix outputed the non existant prefix '$kde_libs_prefix' for kdelibs.
This means it has been moved since you installed it.
This won't work. Please recompile kdelibs for the new prefix.
" >&2;}
{ (exit 1); exit 1; }; }
fi
kde_libs_htmldir=`$KDECONFIG --install html --expandvars`
{ echo "$as_me:2897: checking where to install" >&5
echo $ECHO_N "checking where to install... $ECHO_C" >&6; }
if test "x$prefix" = "xNONE"; then
prefix=$kde_libs_prefix
{ echo "$as_me:2901: result: $prefix (as returned by kde-config)" >&5
echo "${ECHO_T}$prefix (as returned by kde-config)" >&6; }
else
given_prefix=$prefix
{ echo "$as_me:2905: result: $prefix (as requested)" >&5
echo "${ECHO_T}$prefix (as requested)" >&6; }
fi
# And delete superfluous '/' to make compares easier
prefix=`echo "$prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
exec_prefix=`echo "$exec_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
given_prefix=`echo "$given_prefix" | sed 's,//*,/,g' | sed -e 's,/$,,'`
# Check whether --enable-fast-perl was given.
if test "${enable_fast_perl+set}" = set; then
enableval=$enable_fast_perl; with_fast_perl=$enableval
else
with_fast_perl=yes
fi
val=
if test -f $srcdir/configure.files ; then
val=`sed -e 's%^%\$(top_srcdir)/%' $srcdir/configure.files`
fi
CONF_FILES=
if test -n "$val" ; then
for i in $val ; do
CONF_FILES="$CONF_FILES $i"
done
fi
ac_config_headers="$ac_config_headers config.h"
DEPDIR="${am__leading_dot}deps"
ac_config_commands="$ac_config_commands depfiles"
am_make=${MAKE-make}
cat > confinc << 'END'
am__doit:
@echo done
.PHONY: am__doit
END
# If we don't find an include directive, just comment out the code.
{ echo "$as_me:2956: checking for style of include used by $am_make" >&5
echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; }
am__include="#"
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then
am__include=include
am__quote=
_am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
echo '.include "confinc"' > confmf
if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
am__include=.include
am__quote="\""
_am_result=BSD
fi
fi
{ echo "$as_me:2984: result: $_am_result" >&5
echo "${ECHO_T}$_am_result" >&6; }
rm -f confinc confmf
# Check whether --enable-dependency-tracking was given.
if test "${enable_dependency_tracking+set}" = set; then
enableval=$enable_dependency_tracking;
fi
if test "x$enable_dependency_tracking" != xno; then
am_depcomp="$ac_aux_dir/depcomp"
AMDEPBACKSLASH='\'
fi
if test "x$enable_dependency_tracking" != xno; then
AMDEP_TRUE=
AMDEP_FALSE='#'
else
AMDEP_TRUE='#'
AMDEP_FALSE=
fi
# Check whether --enable-debug was given.
if test "${enable_debug+set}" = set; then
enableval=$enable_debug;
case $enableval in
yes)
kde_use_debug_code="yes"
kde_use_debug_define=no
;;
full)
kde_use_debug_code="full"
kde_use_debug_define=no
;;
*)
kde_use_debug_code="no"
kde_use_debug_define=yes
;;
esac
else
kde_use_debug_code="no"
kde_use_debug_define=no
fi
# Check whether --enable-dummyoption was given.
if test "${enable_dummyoption+set}" = set; then
enableval=$enable_dummyoption;
fi
# Check whether --enable-strict was given.
if test "${enable_strict+set}" = set; then
enableval=$enable_strict;
if test $enableval = "no"; then
kde_use_strict_options="no"
else
kde_use_strict_options="yes"
fi
else
kde_use_strict_options="no"
fi
# Check whether --enable-warnings was given.
if test "${enable_warnings+set}" = set; then
enableval=$enable_warnings;
if test $enableval = "no"; then
kde_use_warnings="no"
else
kde_use_warnings="yes"
fi
else
kde_use_warnings="yes"
fi
if test "$kde_use_debug_code" != "no"; then
kde_use_warnings=yes
fi
# Check whether --enable-profile was given.
if test "${enable_profile+set}" = set; then
enableval=$enable_profile; kde_use_profiling=$enableval
else
kde_use_profiling="no"
fi
CFLAGS=" $CFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcc; ac_word=$2
{ echo "$as_me:3094: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}gcc"
echo "$as_me:3110: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ echo "$as_me:3121: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
{ echo "$as_me:3124: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$ac_cv_prog_CC"; then
ac_ct_CC=$CC
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
{ echo "$as_me:3134: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="gcc"
echo "$as_me:3150: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ echo "$as_me:3161: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6; }
else
{ echo "$as_me:3164: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:3173: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
else
CC="$ac_cv_prog_CC"
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args.
set dummy ${ac_tool_prefix}cc; ac_word=$2
{ echo "$as_me:3191: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="${ac_tool_prefix}cc"
echo "$as_me:3207: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ echo "$as_me:3218: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
{ echo "$as_me:3221: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
fi
if test -z "$CC"; then
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
{ echo "$as_me:3231: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
ac_prog_rejected=no
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then
ac_prog_rejected=yes
continue
fi
ac_cv_prog_CC="cc"
echo "$as_me:3252: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
if test $ac_prog_rejected = yes; then
# We found a bogon in the path, so make sure we never use it.
set dummy $ac_cv_prog_CC
shift
if test $# != 0; then
# We chose a different compiler from the bogus one.
# However, it has the same basename, so the bogon will be chosen
# first if we set CC to just the basename; use the full file name.
shift
ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@"
fi
fi
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ echo "$as_me:3275: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
{ echo "$as_me:3278: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$CC"; then
if test -n "$ac_tool_prefix"; then
for ac_prog in cl.exe
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:3290: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CC"; then
ac_cv_prog_CC="$CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CC="$ac_tool_prefix$ac_prog"
echo "$as_me:3306: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CC=$ac_cv_prog_CC
if test -n "$CC"; then
{ echo "$as_me:3317: result: $CC" >&5
echo "${ECHO_T}$CC" >&6; }
else
{ echo "$as_me:3320: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$CC" && break
done
fi
if test -z "$CC"; then
ac_ct_CC=$CC
for ac_prog in cl.exe
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:3334: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CC+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CC"; then
ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CC="$ac_prog"
echo "$as_me:3350: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CC=$ac_cv_prog_ac_ct_CC
if test -n "$ac_ct_CC"; then
{ echo "$as_me:3361: result: $ac_ct_CC" >&5
echo "${ECHO_T}$ac_ct_CC" >&6; }
else
{ echo "$as_me:3364: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$ac_ct_CC" && break
done
if test "x$ac_ct_CC" = x; then
CC=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:3377: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
CC=$ac_ct_CC
fi
fi
fi
test -z "$CC" && { { echo "$as_me:3392: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&5
echo "$as_me: error: no acceptable C compiler found in \$PATH
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
# Provide some information about the compiler.
echo "$as_me:3399: checking for C compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3406: $ac_try_echo\"") >&5
(eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
echo "$as_me:3409: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3416: $ac_try_echo\"") >&5
(eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
echo "$as_me:3419: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3426: $ac_try_echo\"") >&5
(eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
echo "$as_me:3429: \$? = $ac_status" >&5
(exit $ac_status); }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files a.out a.exe b.out"
# Try to create an executable without -o first, disregard a.out.
# It will help us diagnose broken compilers, and finding out an intuition
# of exeext.
{ echo "$as_me:3452: checking for C compiler default output file name" >&5
echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; }
ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'`
#
# List of possible output files, starting from the most likely.
# The algorithm is not robust to junk in `.', hence go to wildcards (a.*)
# only as a last resort. b.out is created by i960 compilers.
ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out'
#
# The IRIX 6 linker writes into existing files which may not be
# executable, retaining their permissions. Remove them first so a
# subsequent execution test works.
ac_rmfiles=
for ac_file in $ac_files
do
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
* ) ac_rmfiles="$ac_rmfiles $ac_file";;
esac
done
rm -f $ac_rmfiles
if { (ac_try="$ac_link_default"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3479: $ac_try_echo\"") >&5
(eval "$ac_link_default") 2>&5
ac_status=$?
echo "$as_me:3482: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Autoconf-2.13 could set the ac_cv_exeext variable to `no'.
# So ignore a value of `no', otherwise this would lead to `EXEEXT = no'
# in a Makefile. We should not override ac_cv_exeext if it was cached,
# so that the user can short-circuit this test for compilers unknown to
# Autoconf.
for ac_file in $ac_files ''
do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj )
;;
[ab].out )
# We found the default executable, but exeext='' is most
# certainly right.
break;;
*.* )
if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no;
then :; else
ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
fi
# We set ac_cv_exeext here because the later test for it is not
# safe: cross compilers may not add the suffix if given an `-o'
# argument, so we may need to know it at that point already.
# Even if this section looks crufty: it has the advantage of
# actually working.
break;;
* )
break;;
esac
done
test "$ac_cv_exeext" = no && ac_cv_exeext=
else
ac_file=''
fi
{ echo "$as_me:3520: result: $ac_file" >&5
echo "${ECHO_T}$ac_file" >&6; }
if test -z "$ac_file"; then
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { echo "$as_me:3526: error: C compiler cannot create executables
See \`config.log' for more details." >&5
echo "$as_me: error: C compiler cannot create executables
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
fi
ac_exeext=$ac_cv_exeext
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ echo "$as_me:3537: checking whether the C compiler works" >&5
echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; }
# FIXME: These cross compiler hacks should be removed for Autoconf 3.0
# If not cross compiling, check that we can run a simple program.
if test "$cross_compiling" != yes; then
if { ac_try='./$ac_file'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3547: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:3550: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
cross_compiling=no
else
if test "$cross_compiling" = maybe; then
cross_compiling=yes
else
{ { echo "$as_me:3557: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&5
echo "$as_me: error: cannot run C compiled programs.
If you meant to cross compile, use \`--host'.
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
fi
{ echo "$as_me:3567: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
rm -f a.out a.exe conftest$ac_cv_exeext b.out
ac_clean_files=$ac_clean_files_save
# Check that the compiler produces executables we can run. If not, either
# the compiler is broken, or we cross compile.
{ echo "$as_me:3574: checking whether we are cross compiling" >&5
echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; }
{ echo "$as_me:3576: result: $cross_compiling" >&5
echo "${ECHO_T}$cross_compiling" >&6; }
{ echo "$as_me:3579: checking for suffix of executables" >&5
echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; }
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3586: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:3589: \$? = $ac_status" >&5
(exit $ac_status); }; then
# If both `conftest.exe' and `conftest' are `present' (well, observable)
# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will
# work properly (i.e., refer to `conftest.exe'), while it won't with
# `rm'.
for ac_file in conftest.exe conftest conftest.*; do
test -f "$ac_file" || continue
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;;
*.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'`
break;;
* ) break;;
esac
done
else
{ { echo "$as_me:3605: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of executables: cannot compile and link
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f conftest$ac_cv_exeext
{ echo "$as_me:3613: result: $ac_cv_exeext" >&5
echo "${ECHO_T}$ac_cv_exeext" >&6; }
rm -f conftest.$ac_ext
EXEEXT=$ac_cv_exeext
ac_exeext=$EXEEXT
{ echo "$as_me:3619: checking for suffix of object files" >&5
echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; }
if test "${ac_cv_objext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.o conftest.obj
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3645: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>&5
ac_status=$?
echo "$as_me:3648: \$? = $ac_status" >&5
(exit $ac_status); }; then
for ac_file in conftest.o conftest.obj conftest.*; do
test -f "$ac_file" || continue;
case $ac_file in
*.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;;
*) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'`
break;;
esac
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ { echo "$as_me:3662: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute suffix of object files: cannot compile
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f conftest.$ac_cv_objext conftest.$ac_ext
fi
{ echo "$as_me:3671: result: $ac_cv_objext" >&5
echo "${ECHO_T}$ac_cv_objext" >&6; }
OBJEXT=$ac_cv_objext
ac_objext=$OBJEXT
{ echo "$as_me:3675: checking whether we are using the GNU C compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; }
if test "${ac_cv_c_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3704: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3710: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_c_compiler_gnu=$ac_compiler_gnu
fi
{ echo "$as_me:3727: result: $ac_cv_c_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; }
GCC=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CFLAGS=${CFLAGS+set}
ac_save_CFLAGS=$CFLAGS
{ echo "$as_me:3732: checking whether $CC accepts -g" >&5
echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_save_c_werror_flag=$ac_c_werror_flag
ac_c_werror_flag=yes
ac_cv_prog_cc_g=no
CFLAGS="-g"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3762: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3768: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
CFLAGS=""
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3800: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3806: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_c_werror_flag=$ac_save_c_werror_flag
CFLAGS="-g"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3839: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3845: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_c_werror_flag=$ac_save_c_werror_flag
fi
{ echo "$as_me:3867: result: $ac_cv_prog_cc_g" >&5
echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; }
if test "$ac_test_CFLAGS" = set; then
CFLAGS=$ac_save_CFLAGS
elif test $ac_cv_prog_cc_g = yes; then
if test "$GCC" = yes; then
CFLAGS="-g -O2"
else
CFLAGS="-g"
fi
else
if test "$GCC" = yes; then
CFLAGS="-O2"
else
CFLAGS=
fi
fi
{ echo "$as_me:3884: checking for $CC option to accept ISO C89" >&5
echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; }
if test "${ac_cv_prog_cc_c89+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_prog_cc_c89=no
ac_save_CC=$CC
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <stdarg.h>
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */
struct buf { int x; };
FILE * (*rcsopen) (struct buf *, struct stat *, int);
static char *e (p, i)
char **p;
int i;
{
return p[i];
}
static char *f (char * (*g) (char **, int), char **p, ...)
{
char *s;
va_list v;
va_start (v,p);
s = g (p, va_arg (v,int));
va_end (v);
return s;
}
/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has
function prototypes and stuff, but not '\xHH' hex character constants.
These don't provoke an error unfortunately, instead are silently treated
as 'x'. The following induces an error, until -std is added to get
proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an
array size at least. It's necessary to write '\x00'==0 to get something
that's true only with -std. */
int osf4_cc_array ['\x00' == 0 ? 1 : -1];
/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters
inside strings and character constants. */
#define FOO(x) 'x'
int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1];
int test (int i, double x);
struct s1 {int (*f) (int a);};
struct s2 {int (*f) (double a);};
int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int);
int argc;
char **argv;
int
main ()
{
return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1];
;
return 0;
}
_ACEOF
for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \
-Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__"
do
CC="$ac_save_CC $ac_arg"
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:3958: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:3964: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cc_c89=$ac_arg
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext
test "x$ac_cv_prog_cc_c89" != "xno" && break
done
rm -f conftest.$ac_ext
CC=$ac_save_CC
fi
# AC_CACHE_VAL
case "x$ac_cv_prog_cc_c89" in
x)
{ echo "$as_me:3987: result: none needed" >&5
echo "${ECHO_T}none needed" >&6; } ;;
xno)
{ echo "$as_me:3990: result: unsupported" >&5
echo "${ECHO_T}unsupported" >&6; } ;;
*)
CC="$CC $ac_cv_prog_cc_c89"
{ echo "$as_me:3994: result: $ac_cv_prog_cc_c89" >&5
echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;;
esac
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
depcc="$CC" am_compiler_list=
{ echo "$as_me:4007: checking dependency style of $depcc" >&5
echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_CC_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CC_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_CC_dependencies_compiler_type=none
fi
fi
{ echo "$as_me:4097: result: $am_cv_CC_dependencies_compiler_type" >&5
echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; }
CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CC_dependencies_compiler_type" = gcc3; then
am__fastdepCC_TRUE=
am__fastdepCC_FALSE='#'
else
am__fastdepCC_TRUE='#'
am__fastdepCC_FALSE=
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ echo "$as_me:4120: checking how to run the C preprocessor" >&5
echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; }
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
fi
if test -z "$CPP"; then
if test "${ac_cv_prog_CPP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# Double quotes because CPP needs to be expanded
for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp"
do
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
# <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4160: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4166: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4197: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4203: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
break
fi
done
ac_cv_prog_CPP=$CPP
fi
CPP=$ac_cv_prog_CPP
else
ac_cv_prog_CPP=$CPP
fi
{ echo "$as_me:4236: result: $CPP" >&5
echo "${ECHO_T}$CPP" >&6; }
ac_preproc_ok=false
for ac_c_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
# <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4265: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4271: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4302: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4308: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
:
else
{ { echo "$as_me:4332: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&5
echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test "$GCC" = "yes"; then
if test "$kde_use_debug_code" != "no"; then
if test $kde_use_debug_code = "full"; then
CFLAGS="-g3 -fno-inline $CFLAGS"
else
CFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CFLAGS"
fi
else
CFLAGS="-O2 $CFLAGS"
fi
fi
if test "$kde_use_debug_define" = "yes"; then
CFLAGS="-DNDEBUG $CFLAGS"
fi
case "$host" in
*-*-sysv4.2uw*) CFLAGS="-D_UNIXWARE $CFLAGS";;
*-*-sysv5uw7*) CFLAGS="-D_UNIXWARE7 $CFLAGS";;
esac
if test -z "$LDFLAGS" && test "$kde_use_debug_code" = "no" && test "$GCC" = "yes"; then
LDFLAGS=""
fi
CXXFLAGS=" $CXXFLAGS"
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
if test -z "$CXX"; then
if test -n "$CCC"; then
CXX=$CCC
else
if test -n "$ac_tool_prefix"; then
for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:4388: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$CXX"; then
ac_cv_prog_CXX="$CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_CXX="$ac_tool_prefix$ac_prog"
echo "$as_me:4404: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
CXX=$ac_cv_prog_CXX
if test -n "$CXX"; then
{ echo "$as_me:4415: result: $CXX" >&5
echo "${ECHO_T}$CXX" >&6; }
else
{ echo "$as_me:4418: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$CXX" && break
done
fi
if test -z "$CXX"; then
ac_ct_CXX=$CXX
for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:4432: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_CXX"; then
ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_CXX="$ac_prog"
echo "$as_me:4448: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_CXX=$ac_cv_prog_ac_ct_CXX
if test -n "$ac_ct_CXX"; then
{ echo "$as_me:4459: result: $ac_ct_CXX" >&5
echo "${ECHO_T}$ac_ct_CXX" >&6; }
else
{ echo "$as_me:4462: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$ac_ct_CXX" && break
done
if test "x$ac_ct_CXX" = x; then
CXX="g++"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:4475: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
CXX=$ac_ct_CXX
fi
fi
fi
fi
# Provide some information about the compiler.
echo "$as_me:4490: checking for C++ compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4497: $ac_try_echo\"") >&5
(eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
echo "$as_me:4500: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4507: $ac_try_echo\"") >&5
(eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
echo "$as_me:4510: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4517: $ac_try_echo\"") >&5
(eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
echo "$as_me:4520: \$? = $ac_status" >&5
(exit $ac_status); }
{ echo "$as_me:4523: checking whether we are using the GNU C++ compiler" >&5
echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; }
if test "${ac_cv_cxx_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
#ifndef __GNUC__
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4552: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4558: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_cxx_compiler_gnu=$ac_compiler_gnu
fi
{ echo "$as_me:4575: result: $ac_cv_cxx_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; }
GXX=`test $ac_compiler_gnu = yes && echo yes`
ac_test_CXXFLAGS=${CXXFLAGS+set}
ac_save_CXXFLAGS=$CXXFLAGS
{ echo "$as_me:4580: checking whether $CXX accepts -g" >&5
echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_cxx_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_save_cxx_werror_flag=$ac_cxx_werror_flag
ac_cxx_werror_flag=yes
ac_cv_prog_cxx_g=no
CXXFLAGS="-g"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4610: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4616: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cxx_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
CXXFLAGS=""
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4648: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4654: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cxx_werror_flag=$ac_save_cxx_werror_flag
CXXFLAGS="-g"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4687: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4693: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_cxx_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cxx_werror_flag=$ac_save_cxx_werror_flag
fi
{ echo "$as_me:4715: result: $ac_cv_prog_cxx_g" >&5
echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; }
if test "$ac_test_CXXFLAGS" = set; then
CXXFLAGS=$ac_save_CXXFLAGS
elif test $ac_cv_prog_cxx_g = yes; then
if test "$GXX" = yes; then
CXXFLAGS="-g -O2"
else
CXXFLAGS="-g"
fi
else
if test "$GXX" = yes; then
CXXFLAGS="-O2"
else
CXXFLAGS=
fi
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
depcc="$CXX" am_compiler_list=
{ echo "$as_me:4740: checking dependency style of $depcc" >&5
echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; }
if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
# We make a subdir and do the tests there. Otherwise we can end up
# making bogus files that we don't know about and never remove. For
# instance it was reported that on HP-UX the gcc test will end up
# making a dummy file named `D' -- because `-MD' means `put the output
# in D'.
mkdir conftest.dir
# Copy depcomp to subdir because otherwise we won't find it if we're
# using a relative directory.
cp "$am_depcomp" conftest.dir
cd conftest.dir
# We will build objects and dependencies in a subdirectory because
# it helps to detect inapplicable dependency modes. For instance
# both Tru64's cc and ICC support -MD to output dependencies as a
# side effect of compilation, but ICC will put the dependencies in
# the current directory while Tru64 will put them in the object
# directory.
mkdir sub
am_cv_CXX_dependencies_compiler_type=none
if test "$am_compiler_list" = ""; then
am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp`
fi
for depmode in $am_compiler_list; do
# Setup a source with many dependencies, because some compilers
# like to wrap large dependency lists on column 80 (with \), and
# we should not choose a depcomp mode which is confused by this.
#
# We need to recreate these files for each test, as the compiler may
# overwrite some of them when testing with obscure command lines.
# This happens at least with the AIX C compiler.
: > sub/conftest.c
for i in 1 2 3 4 5 6; do
echo '#include "conftst'$i'.h"' >> sub/conftest.c
# Using `: > sub/conftst$i.h' creates only sub/conftst1.h with
# Solaris 8's {/usr,}/bin/sh.
touch sub/conftst$i.h
done
echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
case $depmode in
nosideeffect)
# after this tag, mechanisms are not by side-effect, so they'll
# only be used when explicitly requested
if test "x$enable_dependency_tracking" = xyes; then
continue
else
break
fi
;;
none) break ;;
esac
# We check with `-c' and `-o' for the sake of the "dashmstdout"
# mode. It turns out that the SunPro C++ compiler does not properly
# handle `-M -o', and we need to detect this.
if depmode=$depmode \
source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \
depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
$SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \
>/dev/null 2>conftest.err &&
grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 &&
${MAKE-make} -s -f confmf > /dev/null 2>&1; then
# icc doesn't choke on unknown options, it will just issue warnings
# or remarks (even with -Werror). So we grep stderr for any message
# that says an option was ignored or not supported.
# When given -MP, icc 7.0 and 7.1 complain thusly:
# icc: Command line warning: ignoring option '-M'; no argument required
# The diagnosis changed in icc 8.0:
# icc: Command line remark: option '-MP' not supported
if (grep 'ignoring option' conftest.err ||
grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
am_cv_CXX_dependencies_compiler_type=$depmode
break
fi
fi
done
cd ..
rm -rf conftest.dir
else
am_cv_CXX_dependencies_compiler_type=none
fi
fi
{ echo "$as_me:4830: result: $am_cv_CXX_dependencies_compiler_type" >&5
echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; }
CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type
if
test "x$enable_dependency_tracking" != xno \
&& test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then
am__fastdepCXX_TRUE=
am__fastdepCXX_FALSE='#'
else
am__fastdepCXX_TRUE='#'
am__fastdepCXX_FALSE=
fi
{ echo "$as_me:4849: checking whether $CC is blacklisted" >&5
echo $ECHO_N "checking whether $CC is blacklisted... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __GNUC__
#if __GNUC__ == 4 && __GNUC_MINOR__ == 0 && __GNUC_PATCHLEVEL__ == 0
choke me
#endif
#endif
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4880: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4886: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_bad_compiler=no
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_bad_compiler=yes
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:4902: result: $kde_bad_compiler" >&5
echo "${ECHO_T}$kde_bad_compiler" >&6; }
if test "$kde_bad_compiler" = "yes"; then
{ { echo "$as_me:4906: error:
This particular compiler version is blacklisted because it
is known to miscompile KDE. Please use a newer version, or
if that is not yet available, choose an older version.
Please do not report a bug or bother us reporting this
configure error. We know about it, and we introduced
it by intention to avoid untraceable bugs or crashes in KDE.
" >&5
echo "$as_me: error:
This particular compiler version is blacklisted because it
is known to miscompile KDE. Please use a newer version, or
if that is not yet available, choose an older version.
Please do not report a bug or bother us reporting this
configure error. We know about it, and we introduced
it by intention to avoid untraceable bugs or crashes in KDE.
" >&2;}
{ (exit 1); exit 1; }; }
fi
if test "$GXX" = "yes" || test "$CXX" = "KCC"; then
if test "$kde_use_debug_code" != "no"; then
if test "$CXX" = "KCC"; then
CXXFLAGS="+K0 -Wall -pedantic -W -Wpointer-arith -Wwrite-strings $CXXFLAGS"
else
if test "$kde_use_debug_code" = "full"; then
CXXFLAGS="-g3 -fno-inline $CXXFLAGS"
else
CXXFLAGS="-g -O2 -fno-schedule-insns -fno-inline $CXXFLAGS"
fi
fi
{ echo "$as_me:4945: checking whether $CXX supports -fno-builtin" >&5
echo $ECHO_N "checking whether $CXX supports -fno-builtin... $ECHO_C" >&6; }
kde_cache=`echo fno-builtin | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-builtin"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:4987: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:4993: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5020: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="-fno-builtin $CXXFLAGS"
else
{ echo "$as_me:5025: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5033: checking whether $CXX supports -Woverloaded-virtual" >&5
echo $ECHO_N "checking whether $CXX supports -Woverloaded-virtual... $ECHO_C" >&6; }
kde_cache=`echo Woverloaded-virtual | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Woverloaded-virtual"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5073: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5079: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5106: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
WOVERLOADED_VIRTUAL="-Woverloaded-virtual"
else
{ echo "$as_me:5111: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
WOVERLOADED_VRITUAL=""
fi
else
if test "$CXX" = "KCC"; then
CXXFLAGS="+K3 $CXXFLAGS"
else
CXXFLAGS="-O2 $CXXFLAGS"
fi
fi
fi
if test "$kde_use_debug_define" = "yes"; then
CXXFLAGS="-DNDEBUG -DNO_DEBUG $CXXFLAGS"
fi
if test "$kde_use_profiling" = "yes"; then
{ echo "$as_me:5133: checking whether $CXX supports -pg" >&5
echo $ECHO_N "checking whether $CXX supports -pg... $ECHO_C" >&6; }
kde_cache=`echo pg | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -pg"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5173: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5179: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5206: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CFLAGS="-pg $CFLAGS"
CXXFLAGS="-pg $CXXFLAGS"
else
{ echo "$as_me:5214: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
if test "$kde_use_warnings" = "yes"; then
if test "$GCC" = "yes"; then
CXXFLAGS="-Wall -W -Wpointer-arith $CXXFLAGS"
case $host in
*-*-linux-gnu)
CFLAGS="-std=iso9899:1990 -W -Wall -Wchar-subscripts -Wshadow -Wpointer-arith -Wmissing-prototypes -Wwrite-strings -D_XOPEN_SOURCE=500 -D_BSD_SOURCE $CFLAGS"
CXXFLAGS="-ansi -D_XOPEN_SOURCE=500 -D_BSD_SOURCE -Wcast-align -Wchar-subscripts $CXXFLAGS"
{ echo "$as_me:5230: checking whether $CXX supports -Wmissing-format-attribute" >&5
echo $ECHO_N "checking whether $CXX supports -Wmissing-format-attribute... $ECHO_C" >&6; }
kde_cache=`echo Wmissing-format-attribute | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wmissing-format-attribute"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5270: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5276: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5303: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS -Wformat-security -Wmissing-format-attribute"
else
{ echo "$as_me:5308: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5315: checking whether $CC supports -Wmissing-format-attribute" >&5
echo $ECHO_N "checking whether $CC supports -Wmissing-format-attribute... $ECHO_C" >&6; }
kde_cache=`echo Wmissing-format-attribute | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cc_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -Wmissing-format-attribute"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5352: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5358: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cc_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CFLAGS="$save_CFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cc_'$kde_cache`\" = yes"; then
{ echo "$as_me:5385: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CFLAGS="$CFLAGS -Wformat-security -Wmissing-format-attribute"
else
{ echo "$as_me:5390: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
;;
esac
{ echo "$as_me:5399: checking whether $CXX supports -Wundef" >&5
echo $ECHO_N "checking whether $CXX supports -Wundef... $ECHO_C" >&6; }
kde_cache=`echo Wundef | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wundef"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5439: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5445: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5472: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="-Wundef $CXXFLAGS"
else
{ echo "$as_me:5477: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5484: checking whether $CXX supports -Wno-long-long" >&5
echo $ECHO_N "checking whether $CXX supports -Wno-long-long... $ECHO_C" >&6; }
kde_cache=`echo Wno-long-long | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wno-long-long"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5524: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5530: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5557: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="-Wno-long-long $CXXFLAGS"
else
{ echo "$as_me:5562: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5569: checking whether $CXX supports -Wno-non-virtual-dtor" >&5
echo $ECHO_N "checking whether $CXX supports -Wno-non-virtual-dtor... $ECHO_C" >&6; }
kde_cache=`echo Wno-non-virtual-dtor | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5609: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5615: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5642: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS -Wno-non-virtual-dtor"
else
{ echo "$as_me:5647: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
fi
if test "$GXX" = "yes" && test "$kde_use_strict_options" = "yes"; then
CXXFLAGS="-Wcast-qual -Wshadow -Wcast-align $CXXFLAGS"
fi
# Check whether --enable-pch was given.
if test "${enable_pch+set}" = set; then
enableval=$enable_pch; kde_use_pch=$enableval
else
kde_use_pch=no
fi
HAVE_GCC_VISIBILITY=0
if test "$GXX" = "yes"; then
gcc_no_reorder_blocks=NO
{ echo "$as_me:5674: checking whether $CXX supports -fno-reorder-blocks" >&5
echo $ECHO_N "checking whether $CXX supports -fno-reorder-blocks... $ECHO_C" >&6; }
kde_cache=`echo fno-reorder-blocks | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-reorder-blocks"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5714: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5720: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5747: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
gcc_no_reorder_blocks=YES
else
{ echo "$as_me:5752: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
if test $kde_use_debug_code != "no" && \
test $kde_use_debug_code != "full" && \
test "YES" = "$gcc_no_reorder_blocks" ; then
CXXFLAGS="$CXXFLAGS -fno-reorder-blocks"
CFLAGS="$CFLAGS -fno-reorder-blocks"
fi
{ echo "$as_me:5765: checking whether $CXX supports -fno-exceptions" >&5
echo $ECHO_N "checking whether $CXX supports -fno-exceptions... $ECHO_C" >&6; }
kde_cache=`echo fno-exceptions | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-exceptions"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5805: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5811: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5838: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS -fno-exceptions"
else
{ echo "$as_me:5843: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5850: checking whether $CXX supports -fno-check-new" >&5
echo $ECHO_N "checking whether $CXX supports -fno-check-new... $ECHO_C" >&6; }
kde_cache=`echo fno-check-new | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-check-new"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5890: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5896: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:5923: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS -fno-check-new"
else
{ echo "$as_me:5928: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:5935: checking whether $CXX supports -fno-common" >&5
echo $ECHO_N "checking whether $CXX supports -fno-common... $ECHO_C" >&6; }
kde_cache=`echo fno-common | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fno-common"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:5975: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:5981: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6008: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS -fno-common"
else
{ echo "$as_me:6013: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:6020: checking whether $CXX supports -fexceptions" >&5
echo $ECHO_N "checking whether $CXX supports -fexceptions... $ECHO_C" >&6; }
kde_cache=`echo fexceptions | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -fexceptions"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6060: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6066: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6093: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
USE_EXCEPTIONS="-fexceptions"
else
{ echo "$as_me:6098: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
USE_EXCEPTIONS=
fi
ENABLE_PERMISSIVE_FLAG="-fpermissive"
if test "$kde_use_pch" = "yes"; then
{ echo "$as_me:6107: checking whether gcc supports precompiling c header files" >&5
echo $ECHO_N "checking whether gcc supports precompiling c header files... $ECHO_C" >&6; }
echo >conftest.h
if $CC -x c-header conftest.h >/dev/null 2>/dev/null; then
kde_gcc_supports_pch=yes
{ echo "$as_me:6112: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
kde_gcc_supports_pch=no
{ echo "$as_me:6116: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "$kde_gcc_supports_pch" = "yes"; then
{ echo "$as_me:6120: checking whether gcc supports precompiling c++ header files" >&5
echo $ECHO_N "checking whether gcc supports precompiling c++ header files... $ECHO_C" >&6; }
if $CXX -x c++-header conftest.h >/dev/null 2>/dev/null; then
kde_gcc_supports_pch=yes
{ echo "$as_me:6124: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
kde_gcc_supports_pch=no
{ echo "$as_me:6128: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
rm -f conftest.h conftest.h.gch
fi
{ echo "$as_me:6136: checking whether system headers can cope with -O2 -fno-inline" >&5
echo $ECHO_N "checking whether system headers can cope with -O2 -fno-inline... $ECHO_C" >&6; }
if test "${kde_cv_opt_noinline_match+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_opt_noinline_match=irrelevant
if echo "$CFLAGS" | grep -e -O2 >/dev/null 2>/dev/null \
&& echo "$CFLAGS" | grep -e -fno-inline >/dev/null 2>/dev/null ; then
ac_cflags_save="$CFLAGS"
CFLAGS="$CFLAGS -D_USE_GNU"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
int
main ()
{
const char *pt, *et;
et = __extension__ ({ char __a0, __a1, __a2; (__builtin_constant_p ( ";," ) && ((size_t)(const void *)(( ";," )+ 1) - (size_t)(const void *)( ";," ) == 1) ? ((__a0 =((__const char *) ( ";," ))[0], __a0 == '\0') ? ((void) ( pt ),((void *)0) ) : ((__a1 = ((__const char *) ( ";," ))[1], __a1== '\0') ? (__extension__ (__builtin_constant_p ( __a0 ) && ( __a0 ) == '\0' ? (char *) __rawmemchr ( pt , __a0) : strchr( pt , __a0 ))) : ((__a2 = ((__const char *) ( ";," ))[2], __a2 == '\0') ? __strpbrk_c2 ( pt , __a0, __a1) :(((__const char *) ( ";," ))[3] == '\0' ? __strpbrk_c3 ( pt ,__a0, __a1, __a2): strpbrk ( pt , ";," ))))) : strpbrk ( pt , ";," )); }) ;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6174: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6180: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_opt_noinline_match=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_opt_noinline_match=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CFLAGS="$ac_cflags_save"
fi
fi
{ echo "$as_me:6202: result: $kde_cv_opt_noinline_match" >&5
echo "${ECHO_T}$kde_cv_opt_noinline_match" >&6; }
if test "x$kde_cv_opt_noinline_match" = "xno" ; then
CFLAGS="`echo "$CFLAGS" | sed "s/ -fno-inline//"`"
fi
fi
if test "$kde_use_pch" = "yes" && test "$kde_gcc_supports_pch" = "yes"; then
unsermake_enable_pch_TRUE=
unsermake_enable_pch_FALSE='#'
else
unsermake_enable_pch_TRUE='#'
unsermake_enable_pch_FALSE=
fi
if test "$CXX" = "KCC"; then
if test "$kde_use_pch" = "yes"; then
{ echo "$as_me:6223: checking whether $CXX supports --pch" >&5
echo $ECHO_N "checking whether $CXX supports --pch... $ECHO_C" >&6; }
kde_cache=`echo -pch | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --pch"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6263: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6269: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6296: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --pch"
else
{ echo "$as_me:6301: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
{ echo "$as_me:6309: checking whether $CXX supports --inline_keyword_space_time=6" >&5
echo $ECHO_N "checking whether $CXX supports --inline_keyword_space_time=6... $ECHO_C" >&6; }
kde_cache=`echo -inline_keyword_space_time=6 | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6349: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6355: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6382: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --inline_keyword_space_time=6"
else
{ echo "$as_me:6387: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:6394: checking whether $CXX supports --inline_auto_space_time=2" >&5
echo $ECHO_N "checking whether $CXX supports --inline_auto_space_time=2... $ECHO_C" >&6; }
kde_cache=`echo -inline_auto_space_time=2 | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6434: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6440: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6467: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --inline_auto_space_time=2"
else
{ echo "$as_me:6472: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:6479: checking whether $CXX supports --inline_implicit_space_time=2.0" >&5
echo $ECHO_N "checking whether $CXX supports --inline_implicit_space_time=2.0... $ECHO_C" >&6; }
kde_cache=`echo -inline_implicit_space_time=2.0 | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6519: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6525: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6552: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --inline_implicit_space_time=2.0"
else
{ echo "$as_me:6557: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:6564: checking whether $CXX supports --inline_generated_space_time=2.0" >&5
echo $ECHO_N "checking whether $CXX supports --inline_generated_space_time=2.0... $ECHO_C" >&6; }
kde_cache=`echo -inline_generated_space_time=2.0 | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6604: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6610: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6637: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --inline_generated_space_time=2.0"
else
{ echo "$as_me:6642: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:6649: checking whether $CXX supports --one_per" >&5
echo $ECHO_N "checking whether $CXX supports --one_per... $ECHO_C" >&6; }
kde_cache=`echo -one_per | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS --one_per"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6689: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6695: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:6722: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
CXXFLAGS="$CXXFLAGS --one_per"
else
{ echo "$as_me:6727: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
USE_RTTI=
case "$host" in
*-*-irix*) test "$GXX" = yes && CXXFLAGS="-D_LANGUAGE_C_PLUS_PLUS -D__LANGUAGE_C_PLUS_PLUS $CXXFLAGS" ;;
*-*-sysv4.2uw*) CXXFLAGS="-D_UNIXWARE $CXXFLAGS";;
*-*-sysv5uw7*) CXXFLAGS="-D_UNIXWARE7 $CXXFLAGS";;
*-*-solaris*)
if test "$GXX" = yes; then
libstdcpp=`$CXX -print-file-name=libstdc++.so`
if test ! -f $libstdcpp; then
{ { echo "$as_me:6746: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&5
echo "$as_me: error: You've compiled gcc without --enable-shared. This doesn't work with KDE. Please recompile gcc with --enable-shared to receive a libstdc++.so" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
;;
esac
if test "x$kde_use_qt_emb" != "xyes"; then
__val=$CXX
__forbid=" -fno-rtti -rpath "
if test -n "$__val"; then
__new=""
ac_save_IFS=$IFS
IFS=" "
for i in $__val; do
case "$__forbid" in
*" $i "*) { echo "$as_me:6763: WARNING: found forbidden $i in CXX, removing it" >&5
echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;;
*) # Careful to not add spaces, where there were none, because otherwise
# libtool gets confused, if we change e.g. CXX
if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
esac
done
IFS=$ac_save_IFS
CXX=$__new
fi
__val=$CXXFLAGS
__forbid=" -fno-rtti -rpath "
if test -n "$__val"; then
__new=""
ac_save_IFS=$IFS
IFS=" "
for i in $__val; do
case "$__forbid" in
*" $i "*) { echo "$as_me:6782: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5
echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;;
*) # Careful to not add spaces, where there were none, because otherwise
# libtool gets confused, if we change e.g. CXX
if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
esac
done
IFS=$ac_save_IFS
CXXFLAGS=$__new
fi
else
__val=$CXX
__forbid=" -rpath "
if test -n "$__val"; then
__new=""
ac_save_IFS=$IFS
IFS=" "
for i in $__val; do
case "$__forbid" in
*" $i "*) { echo "$as_me:6802: WARNING: found forbidden $i in CXX, removing it" >&5
echo "$as_me: WARNING: found forbidden $i in CXX, removing it" >&2;} ;;
*) # Careful to not add spaces, where there were none, because otherwise
# libtool gets confused, if we change e.g. CXX
if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
esac
done
IFS=$ac_save_IFS
CXX=$__new
fi
__val=$CXXFLAGS
__forbid=" -rpath "
if test -n "$__val"; then
__new=""
ac_save_IFS=$IFS
IFS=" "
for i in $__val; do
case "$__forbid" in
*" $i "*) { echo "$as_me:6821: WARNING: found forbidden $i in CXXFLAGS, removing it" >&5
echo "$as_me: WARNING: found forbidden $i in CXXFLAGS, removing it" >&2;} ;;
*) # Careful to not add spaces, where there were none, because otherwise
# libtool gets confused, if we change e.g. CXX
if test -z "$__new" ; then __new=$i ; else __new="$__new $i" ; fi ;;
esac
done
IFS=$ac_save_IFS
CXXFLAGS=$__new
fi
fi
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
{ echo "$as_me:6840: checking how to run the C++ preprocessor" >&5
echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; }
if test -z "$CXXCPP"; then
if test "${ac_cv_prog_CXXCPP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# Double quotes because CXXCPP needs to be expanded
for CXXCPP in "$CXX -E" "/lib/cpp"
do
ac_preproc_ok=false
for ac_cxx_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
# <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6876: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6882: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
test ! -s conftest.err
}; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6913: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6919: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
test ! -s conftest.err
}; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
break
fi
done
ac_cv_prog_CXXCPP=$CXXCPP
fi
CXXCPP=$ac_cv_prog_CXXCPP
else
ac_cv_prog_CXXCPP=$CXXCPP
fi
{ echo "$as_me:6952: result: $CXXCPP" >&5
echo "${ECHO_T}$CXXCPP" >&6; }
ac_preproc_ok=false
for ac_cxx_preproc_warn_flag in '' yes
do
# Use a header file that comes with gcc, so configuring glibc
# with a fresh cross-compiler works.
# Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
# <limits.h> exists even on freestanding compilers.
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp. "Syntax error" is here to catch this case.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
Syntax error
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:6981: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:6987: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
test ! -s conftest.err
}; then
:
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Broken: fails on valid input.
continue
fi
rm -f conftest.err conftest.$ac_ext
# OK, works on sane cases. Now check whether nonexistent headers
# can be detected and how.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ac_nonexistent.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7018: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7024: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" ||
test ! -s conftest.err
}; then
# Broken: success on invalid input.
continue
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Passes both tests.
ac_preproc_ok=:
break
fi
rm -f conftest.err conftest.$ac_ext
done
# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped.
rm -f conftest.err conftest.$ac_ext
if $ac_preproc_ok; then
:
else
{ { echo "$as_me:7048: error: C++ preprocessor \"$CXXCPP\" fails sanity check
See \`config.log' for more details." >&5
echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check
See \`config.log' for more details." >&2;}
{ (exit 1); exit 1; }; }
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test "$GCC" = yes; then
NOOPT_CFLAGS=-O0
fi
{ echo "$as_me:7066: checking whether $CXX supports -O0" >&5
echo $ECHO_N "checking whether $CXX supports -O0... $ECHO_C" >&6; }
kde_cache=`echo O0 | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -O0"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7106: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7112: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:7139: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
NOOPT_CXXFLAGS=-O0
else
{ echo "$as_me:7144: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
# Check whether --enable-coverage was given.
if test "${enable_coverage+set}" = set; then
enableval=$enable_coverage;
if test "$am_cv_CC_dependencies_compiler_type" = "gcc3"; then
ac_coverage_compiler="-fprofile-arcs -ftest-coverage"
ac_coverage_linker="-lgcc"
elif test "$am_cv_CC_dependencies_compiler_type" = "gcc"; then
ac_coverage_compiler="-fprofile-arcs -ftest-coverage"
ac_coverage_linker=""
else
{ { echo "$as_me:7161: error: coverage with your compiler is not supported" >&5
echo "$as_me: error: coverage with your compiler is not supported" >&2;}
{ (exit 1); exit 1; }; }
fi
CFLAGS="$CFLAGS $ac_coverage_compiler"
CXXFLAGS="$CXXFLAGS $ac_coverage_compiler"
LDFLAGS="$LDFLAGS $ac_coverage_linker"
fi
# Check whether --enable-new_ldflags was given.
if test "${enable_new_ldflags+set}" = set; then
enableval=$enable_new_ldflags; kde_use_new_ldflags=$enableval
else
kde_use_new_ldflags=no
fi
LDFLAGS_AS_NEEDED=""
LDFLAGS_NEW_DTAGS=""
if test "x$kde_use_new_ldflags" = "xyes"; then
LDFLAGS_NEW_DTAGS=""
{ echo "$as_me:7190: checking whether $CXX supports -Wl,--enable-new-dtags" >&5
echo $ECHO_N "checking whether $CXX supports -Wl,--enable-new-dtags... $ECHO_C" >&6; }
kde_cache=`echo Wl,--enable-new-dtags | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wl,--enable-new-dtags"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7230: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7236: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:7263: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
LDFLAGS_NEW_DTAGS="-Wl,--enable-new-dtags"
else
{ echo "$as_me:7268: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
{ echo "$as_me:7276: checking whether $CXX supports -Wl,--as-needed" >&5
echo $ECHO_N "checking whether $CXX supports -Wl,--as-needed... $ECHO_C" >&6; }
kde_cache=`echo Wl,--as-needed | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wl,--as-needed"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7316: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7322: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:7349: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
LDFLAGS_AS_NEEDED="-Wl,--as-needed"
else
{ echo "$as_me:7354: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
# Check whether --enable-final was given.
if test "${enable_final+set}" = set; then
enableval=$enable_final; kde_use_final=$enableval
else
kde_use_final=no
fi
if test "x$kde_use_final" = "xyes"; then
KDE_USE_FINAL_TRUE=""
KDE_USE_FINAL_FALSE="#"
else
KDE_USE_FINAL_TRUE="#"
KDE_USE_FINAL_FALSE=""
fi
# Check whether --enable-closure was given.
if test "${enable_closure+set}" = set; then
enableval=$enable_closure; kde_use_closure=$enableval
else
kde_use_closure=no
fi
KDE_NO_UNDEFINED=""
if test "x$kde_use_closure" = "xyes"; then
KDE_USE_CLOSURE_TRUE=""
KDE_USE_CLOSURE_FALSE="#"
# CXXFLAGS="$CXXFLAGS $REPO"
else
KDE_USE_CLOSURE_TRUE="#"
KDE_USE_CLOSURE_FALSE=""
KDE_NO_UNDEFINED=""
case $host in
*-*-linux-gnu)
{ echo "$as_me:7404: checking whether $CXX supports -Wl,--no-undefined" >&5
echo $ECHO_N "checking whether $CXX supports -Wl,--no-undefined... $ECHO_C" >&6; }
kde_cache=`echo Wl,--no-undefined | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wl,--no-undefined"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7444: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7450: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:7477: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
{ echo "$as_me:7481: checking whether $CXX supports -Wl,--allow-shlib-undefined" >&5
echo $ECHO_N "checking whether $CXX supports -Wl,--allow-shlib-undefined... $ECHO_C" >&6; }
kde_cache=`echo Wl,--allow-shlib-undefined | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -Wl,--allow-shlib-undefined"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:7521: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:7527: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:7554: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
KDE_NO_UNDEFINED="-Wl,--no-undefined -Wl,--allow-shlib-undefined"
else
{ echo "$as_me:7559: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
KDE_NO_UNDEFINED=""
fi
else
{ echo "$as_me:7566: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
KDE_NO_UNDEFINED=""
fi
;;
esac
fi
# Check whether --enable-nmcheck was given.
if test "${enable_nmcheck+set}" = set; then
enableval=$enable_nmcheck; kde_use_nmcheck=$enableval
else
kde_use_nmcheck=no
fi
if test "$kde_use_nmcheck" = "yes"; then
KDE_USE_NMCHECK_TRUE=""
KDE_USE_NMCHECK_FALSE="#"
else
KDE_USE_NMCHECK_TRUE="#"
KDE_USE_NMCHECK_FALSE=""
fi
# Check whether --enable-shared was given.
if test "${enable_shared+set}" = set; then
enableval=$enable_shared; p=${PACKAGE-default}
case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
enable_shared=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_shared=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_shared=yes
fi
# Check whether --enable-static was given.
if test "${enable_static+set}" = set; then
enableval=$enable_static; p=${PACKAGE-default}
case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
enable_static=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_static=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_static=no
fi
# Check whether --enable-libsuffix was given.
if test "${enable_libsuffix+set}" = set; then
enableval=$enable_libsuffix; kdelibsuff=$enableval
else
kdelibsuff="auto"
fi
if test "$kdelibsuff" = "auto"; then
cat > conftest.c << EOF
#include <stdio.h>
int main() {
return 0;
}
EOF
kdelibsuff=`$CC conftest.c -o conftest.out; ldd conftest.out |sed -ne '/libc.so/{
s,.*/lib\([^\/]*\)/.*,\1,
p
}'`
rm -rf conftest.*
fi
if test "$kdelibsuff" = "no" || test "$kdelibsuff" = "none"; then
kdelibsuff=
fi
if test -z "$kdelibsuff"; then
{ echo "$as_me:7679: result: not using lib directory suffix" >&5
echo "${ECHO_T}not using lib directory suffix" >&6; }
cat >>confdefs.h <<\_ACEOF
#define KDELIBSUFF ""
_ACEOF
else
if test "$libdir" = '${exec_prefix}/lib'; then
libdir="$libdir${kdelibsuff}"
libdir="$libdir"
fi
cat >>confdefs.h <<_ACEOF
#define KDELIBSUFF "${kdelibsuff}"
_ACEOF
{ echo "$as_me:7696: result: using lib directory suffix $kdelibsuff" >&5
echo "${ECHO_T}using lib directory suffix $kdelibsuff" >&6; }
fi
# Check whether --enable-fast-install was given.
if test "${enable_fast_install+set}" = set; then
enableval=$enable_fast_install; p=${PACKAGE-default}
case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=no
# Look at the argument we got. We use all the common list separators.
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for pkg in $enableval; do
IFS="$lt_save_ifs"
if test "X$pkg" = "X$p"; then
enable_fast_install=yes
fi
done
IFS="$lt_save_ifs"
;;
esac
else
enable_fast_install=yes
fi
{ echo "$as_me:7724: checking for a sed that does not truncate output" >&5
echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; }
if test "${lt_cv_path_SED+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# Loop through the user's path and test for sed and gsed.
# Then use that list of sed's as ones to test for truncation.
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for lt_ac_prog in sed gsed; do
for ac_exec_ext in '' $ac_executable_extensions; do
if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then
lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext"
fi
done
done
done
lt_ac_max=0
lt_ac_count=0
# Add /usr/xpg4/bin/sed as it is typically found on Solaris
# along with /bin/sed that truncates output.
for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do
test ! -f $lt_ac_sed && break
cat /dev/null > conftest.in
lt_ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >conftest.in
# Check for GNU sed and select it if it is found.
if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then
lt_cv_path_SED=$lt_ac_sed
break
fi
while true; do
cat conftest.in conftest.in >conftest.tmp
mv conftest.tmp conftest.in
cp conftest.in conftest.nl
echo >>conftest.nl
$lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break
cmp -s conftest.out conftest.nl || break
# 10000 chars as input seems more than enough
test $lt_ac_count -gt 10 && break
lt_ac_count=`expr $lt_ac_count + 1`
if test $lt_ac_count -gt $lt_ac_max; then
lt_ac_max=$lt_ac_count
lt_cv_path_SED=$lt_ac_sed
fi
done
done
fi
SED=$lt_cv_path_SED
{ echo "$as_me:7778: result: $SED" >&5
echo "${ECHO_T}$SED" >&6; }
{ echo "$as_me:7781: checking for grep that handles long lines and -e" >&5
echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; }
if test "${ac_cv_path_GREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# Extract the first word of "grep ggrep" to use in msg output
if test -z "$GREP"; then
set dummy grep ggrep; ac_prog_name=$2
if test "${ac_cv_path_GREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_path_GREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in grep ggrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue
# Check for GNU ac_path_GREP and select it if it is found.
# Check for GNU $ac_path_GREP
case `"$ac_path_GREP" --version 2>&1` in
*GNU*)
ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;;
*)
ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
echo 'GREP' >> "conftest.nl"
"$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
ac_count=`expr $ac_count + 1`
if test $ac_count -gt ${ac_path_GREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_GREP="$ac_path_GREP"
ac_path_GREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_GREP_found && break 3
done
done
done
IFS=$as_save_IFS
fi
GREP="$ac_cv_path_GREP"
if test -z "$GREP"; then
{ { echo "$as_me:7844: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
{ (exit 1); exit 1; }; }
fi
else
ac_cv_path_GREP=$GREP
fi
fi
{ echo "$as_me:7855: result: $ac_cv_path_GREP" >&5
echo "${ECHO_T}$ac_cv_path_GREP" >&6; }
GREP="$ac_cv_path_GREP"
{ echo "$as_me:7860: checking for egrep" >&5
echo $ECHO_N "checking for egrep... $ECHO_C" >&6; }
if test "${ac_cv_path_EGREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if echo a | $GREP -E '(a|b)' >/dev/null 2>&1
then ac_cv_path_EGREP="$GREP -E"
else
# Extract the first word of "egrep" to use in msg output
if test -z "$EGREP"; then
set dummy egrep; ac_prog_name=$2
if test "${ac_cv_path_EGREP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_path_EGREP_found=false
# Loop through the user's path and test for each of PROGNAME-LIST
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_prog in egrep; do
for ac_exec_ext in '' $ac_executable_extensions; do
ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext"
{ test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue
# Check for GNU ac_path_EGREP and select it if it is found.
# Check for GNU $ac_path_EGREP
case `"$ac_path_EGREP" --version 2>&1` in
*GNU*)
ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;;
*)
ac_count=0
echo $ECHO_N "0123456789$ECHO_C" >"conftest.in"
while :
do
cat "conftest.in" "conftest.in" >"conftest.tmp"
mv "conftest.tmp" "conftest.in"
cp "conftest.in" "conftest.nl"
echo 'EGREP' >> "conftest.nl"
"$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break
diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break
ac_count=`expr $ac_count + 1`
if test $ac_count -gt ${ac_path_EGREP_max-0}; then
# Best one so far, save it but keep looking for a better one
ac_cv_path_EGREP="$ac_path_EGREP"
ac_path_EGREP_max=$ac_count
fi
# 10*(2^10) chars as input seems more than enough
test $ac_count -gt 10 && break
done
rm -f conftest.in conftest.tmp conftest.nl conftest.out;;
esac
$ac_path_EGREP_found && break 3
done
done
done
IFS=$as_save_IFS
fi
EGREP="$ac_cv_path_EGREP"
if test -z "$EGREP"; then
{ { echo "$as_me:7926: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5
echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;}
{ (exit 1); exit 1; }; }
fi
else
ac_cv_path_EGREP=$EGREP
fi
fi
fi
{ echo "$as_me:7938: result: $ac_cv_path_EGREP" >&5
echo "${ECHO_T}$ac_cv_path_EGREP" >&6; }
EGREP="$ac_cv_path_EGREP"
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
{ echo "$as_me:7954: checking for ld used by $CC" >&5
echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
{ echo "$as_me:7984: checking for GNU ld" >&5
echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
else
{ echo "$as_me:7987: checking for non-GNU ld" >&5
echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
fi
if test "${lt_cv_path_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z "$LD"; then
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break
;;
*)
test "$with_gnu_ld" != yes && break
;;
esac
fi
done
IFS="$lt_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$lt_cv_path_LD"
if test -n "$LD"; then
{ echo "$as_me:8021: result: $LD" >&5
echo "${ECHO_T}$LD" >&6; }
else
{ echo "$as_me:8024: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -z "$LD" && { { echo "$as_me:8027: error: no acceptable ld found in \$PATH" >&5
echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
{ (exit 1); exit 1; }; }
{ echo "$as_me:8030: checking if the linker ($LD) is GNU ld" >&5
echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac
fi
{ echo "$as_me:8045: result: $lt_cv_prog_gnu_ld" >&5
echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
{ echo "$as_me:8050: checking for $LD option to reload object files" >&5
echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; }
if test "${lt_cv_ld_reload_flag+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_ld_reload_flag='-r'
fi
{ echo "$as_me:8057: result: $lt_cv_ld_reload_flag" >&5
echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; }
reload_flag=$lt_cv_ld_reload_flag
case $reload_flag in
"" | " "*) ;;
*) reload_flag=" $reload_flag" ;;
esac
reload_cmds='$LD$reload_flag -o $output$reload_objs'
{ echo "$as_me:8066: checking for BSD-compatible nm" >&5
echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; }
if test "${lt_cv_path_NM+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$NM"; then
# Let the user override the test.
lt_cv_path_NM="$NM"
else
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
tmp_nm="$ac_dir/${ac_tool_prefix}nm"
if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
# Tru64's nm complains that /dev/null is an invalid object file
case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in
*/dev/null* | *'Invalid file or object type'*)
lt_cv_path_NM="$tmp_nm -B"
break
;;
*)
case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in
*/dev/null*)
lt_cv_path_NM="$tmp_nm -p"
break
;;
*)
lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
;;
esac
esac
fi
done
IFS="$lt_save_ifs"
test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
{ echo "$as_me:8108: result: $lt_cv_path_NM" >&5
echo "${ECHO_T}$lt_cv_path_NM" >&6; }
NM="$lt_cv_path_NM"
{ echo "$as_me:8112: checking whether ln -s works" >&5
echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; }
LN_S=$as_ln_s
if test "$LN_S" = "ln -s"; then
{ echo "$as_me:8116: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ echo "$as_me:8119: result: no, using $LN_S" >&5
echo "${ECHO_T}no, using $LN_S" >&6; }
fi
{ echo "$as_me:8123: checking how to recognise dependent libraries" >&5
echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; }
if test "${lt_cv_deplibs_check_method+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_file_magic_cmd='$MAGIC_CMD'
lt_cv_file_magic_test_file=
lt_cv_deplibs_check_method='unknown'
# Need to set the preceding variable on all platforms that support
# interlibrary dependencies.
# 'none' -- dependencies not supported.
# `unknown' -- same as none, but documents that we really don't know.
# 'pass_all' -- all dependencies passed with no checks.
# 'test_compile' -- check by making test program.
# 'file_magic [[regex]]' -- check by looking for files in library path
# which responds to the $file_magic_cmd with a given extended regex.
# If you have `file' or equivalent on your system and you're not sure
# whether `pass_all' will *always* work, you probably want this one.
case $host_os in
aix4* | aix5*)
lt_cv_deplibs_check_method=pass_all
;;
beos*)
lt_cv_deplibs_check_method=pass_all
;;
bsdi4*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
lt_cv_file_magic_cmd='/usr/bin/file -L'
lt_cv_file_magic_test_file=/shlib/libc.so
;;
cygwin*)
lt_cv_deplibs_check_method=pass_all
;;
mingw* | pw32*)
# win32_libid is a shell function defined in ltmain.sh
lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL'
lt_cv_file_magic_cmd='win32_libid'
;;
darwin* | rhapsody*)
# this will be overwritten by pass_all, but leave it in just in case
lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
lt_cv_file_magic_cmd='/usr/bin/file -L'
case "$host_os" in
rhapsody* | darwin1.[012])
lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System`
;;
*) # Darwin 1.3 on
lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
;;
esac
lt_cv_deplibs_check_method=pass_all
;;
freebsd* | kfreebsd*-gnu)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
case $host_cpu in
i*86 )
# Not sure whether the presence of OpenBSD here was a mistake.
# Let's accept both of them until this is cleared up.
lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
;;
esac
else
lt_cv_deplibs_check_method=pass_all
fi
;;
gnu*)
lt_cv_deplibs_check_method=pass_all
;;
hpux10.20* | hpux11*)
lt_cv_file_magic_cmd=/usr/bin/file
case "$host_cpu" in
ia64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
;;
hppa*64*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'
lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl
;;
*)
lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
lt_cv_file_magic_test_file=/usr/lib/libc.sl
;;
esac
;;
irix5* | irix6* | nonstopux*)
case $host_os in
irix5* | nonstopux*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
;;
*)
case $LD in
*-32|*"-32 ") libmagic=32-bit;;
*-n32|*"-n32 ") libmagic=N32;;
*-64|*"-64 ") libmagic=64-bit;;
*) libmagic=never-match;;
esac
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
;;
esac
lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
lt_cv_deplibs_check_method=pass_all
;;
# This must be Linux ELF.
linux*)
case $host_cpu in
alpha* | hppa* | i*86 | ia64* | m68* | mips* | powerpc* | sparc* | s390* | sh* | x86_64* )
lt_cv_deplibs_check_method=pass_all ;;
# the debian people say, arm and glibc 2.3.1 works for them with pass_all
arm* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
esac
lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$'
else
lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$'
fi
;;
newos6*)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=/usr/lib/libnls.so
;;
nto-qnx*)
lt_cv_deplibs_check_method=unknown
;;
openbsd*)
lt_cv_file_magic_cmd=/usr/bin/file
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
else
lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library'
fi
;;
osf3* | osf4* | osf5*)
# this will be overridden with pass_all, but let us keep it just in case
lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
lt_cv_file_magic_test_file=/shlib/libc.so
lt_cv_deplibs_check_method=pass_all
;;
sco3.2v5*)
lt_cv_deplibs_check_method=pass_all
;;
solaris*)
lt_cv_deplibs_check_method=pass_all
lt_cv_file_magic_test_file=/lib/libc.so
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case $host_vendor in
motorola)
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
;;
ncr)
lt_cv_deplibs_check_method=pass_all
;;
sequent)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'
;;
sni)
lt_cv_file_magic_cmd='/bin/file'
lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"
lt_cv_file_magic_test_file=/lib/libc.so
;;
siemens)
lt_cv_deplibs_check_method=pass_all
;;
esac
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7* | sysv4*uw2*)
lt_cv_deplibs_check_method=pass_all
;;
esac
fi
{ echo "$as_me:8330: result: $lt_cv_deplibs_check_method" >&5
echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; }
file_magic_cmd=$lt_cv_file_magic_cmd
deplibs_check_method=$lt_cv_deplibs_check_method
test -z "$deplibs_check_method" && deplibs_check_method=unknown
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval=$enable_libtool_lock;
fi
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
case $host in
ia64-*-hpux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { (eval echo "$as_me:8356: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:8359: \$? = $ac_status" >&5
(exit $ac_status); }; then
case `/usr/bin/file conftest.$ac_objext` in
*ELF-32*)
HPUX_IA64_MODE="32"
;;
*ELF-64*)
HPUX_IA64_MODE="64"
;;
esac
fi
rm -rf conftest*
;;
*-*-irix6*)
# Find out which ABI we are using.
echo '#line 8374 "configure"' > conftest.$ac_ext
if { (eval echo "$as_me:8375: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:8378: \$? = $ac_status" >&5
(exit $ac_status); }; then
if test "$lt_cv_prog_gnu_ld" = yes; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -melf32bsmip"
;;
*N32*)
LD="${LD-ld} -melf32bmipn32"
;;
*64-bit*)
LD="${LD-ld} -melf64bmip"
;;
esac
else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
*N32*)
LD="${LD-ld} -n32"
;;
*64-bit*)
LD="${LD-ld} -64"
;;
esac
fi
fi
rm -rf conftest*
;;
x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
if { (eval echo "$as_me:8412: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:8415: \$? = $ac_status" >&5
(exit $ac_status); }; then
case "`/usr/bin/file conftest.o`" in
*32-bit*)
LINUX_64_MODE="32"
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_i386"
;;
ppc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
LD="${LD-ld} -m elf_s390"
;;
sparc64-*linux*)
LD="${LD-ld} -m elf32_sparc"
;;
esac
;;
*64-bit*)
LINUX_64_MODE="64"
case $host in
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
ppc*-*linux*|powerpc*-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*)
LD="${LD-ld} -m elf64_s390"
;;
sparc*-*linux*)
LD="${LD-ld} -m elf64_sparc"
;;
esac
;;
esac
fi
rm -rf conftest*
;;
*-*-sco3.2v5*)
# On SCO OpenServer 5, we need -belf to get full-featured binaries.
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
{ echo "$as_me:8461: checking whether the C compiler needs -belf" >&5
echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; }
if test "${lt_cv_cc_needs_belf+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8493: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:8499: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
lt_cv_cc_needs_belf=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
lt_cv_cc_needs_belf=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:8522: result: $lt_cv_cc_needs_belf" >&5
echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; }
if test x"$lt_cv_cc_needs_belf" != x"yes"; then
# this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
CFLAGS="$SAVE_CFLAGS"
fi
;;
esac
need_locks="$enable_libtool_lock"
{ echo "$as_me:8536: checking for ANSI C header files" >&5
echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; }
if test "${ac_cv_header_stdc+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <stdlib.h>
#include <stdarg.h>
#include <string.h>
#include <float.h>
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8566: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:8572: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_header_stdc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_header_stdc=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "memchr" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <stdlib.h>
_ACEOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
$EGREP "free" >/dev/null 2>&1; then
:
else
ac_cv_header_stdc=no
fi
rm -f conftest*
fi
if test $ac_cv_header_stdc = yes; then
# /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
if test "$cross_compiling" = yes; then
:
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <ctype.h>
#include <stdlib.h>
#if ((' ' & 0x0FF) == 0x020)
# define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
#else
# define ISLOWER(c) \
(('a' <= (c) && (c) <= 'i') \
|| ('j' <= (c) && (c) <= 'r') \
|| ('s' <= (c) && (c) <= 'z'))
# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c))
#endif
#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
int
main ()
{
int i;
for (i = 0; i < 256; i++)
if (XOR (islower (i), ISLOWER (i))
|| toupper (i) != TOUPPER (i))
return 2;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8671: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:8674: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8680: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:8683: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
:
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
ac_cv_header_stdc=no
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
fi
{ echo "$as_me:8700: result: $ac_cv_header_stdc" >&5
echo "${ECHO_T}$ac_cv_header_stdc" >&6; }
if test $ac_cv_header_stdc = yes; then
cat >>confdefs.h <<\_ACEOF
#define STDC_HEADERS 1
_ACEOF
fi
# On IRIX 5.3, sys/types and inttypes.h are conflicting.
for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \
inttypes.h stdint.h unistd.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
{ echo "$as_me:8724: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8745: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:8751: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
eval "$as_ac_Header=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "$as_ac_Header=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:8767: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
for ac_header in dlfcn.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
{ echo "$as_me:8784: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:8790: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
{ echo "$as_me:8794: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8811: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:8817: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:8831: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:8835: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:8850: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:8856: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:8870: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:8876: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:8878: WARNING: $ac_header: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:8883: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:8885: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:8887: WARNING: $ac_header: see the Autoconf documentation" >&5
echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
{ echo "$as_me:8889: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:8891: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:8893: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:8898: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:8906: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_f77_compiler_gnu
if test -n "$ac_tool_prefix"; then
for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
do
# Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args.
set dummy $ac_tool_prefix$ac_prog; ac_word=$2
{ echo "$as_me:8928: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_F77+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$F77"; then
ac_cv_prog_F77="$F77" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_F77="$ac_tool_prefix$ac_prog"
echo "$as_me:8944: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
F77=$ac_cv_prog_F77
if test -n "$F77"; then
{ echo "$as_me:8955: result: $F77" >&5
echo "${ECHO_T}$F77" >&6; }
else
{ echo "$as_me:8958: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$F77" && break
done
fi
if test -z "$F77"; then
ac_ct_F77=$F77
for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn
do
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
{ echo "$as_me:8972: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_F77+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_F77"; then
ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_F77="$ac_prog"
echo "$as_me:8988: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_F77=$ac_cv_prog_ac_ct_F77
if test -n "$ac_ct_F77"; then
{ echo "$as_me:8999: result: $ac_ct_F77" >&5
echo "${ECHO_T}$ac_ct_F77" >&6; }
else
{ echo "$as_me:9002: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -n "$ac_ct_F77" && break
done
if test "x$ac_ct_F77" = x; then
F77=""
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:9015: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
F77=$ac_ct_F77
fi
fi
# Provide some information about the compiler.
echo "$as_me:9029: checking for Fortran 77 compiler version" >&5
ac_compiler=`set X $ac_compile; echo $2`
{ (ac_try="$ac_compiler --version >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:9036: $ac_try_echo\"") >&5
(eval "$ac_compiler --version >&5") 2>&5
ac_status=$?
echo "$as_me:9039: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -v >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:9046: $ac_try_echo\"") >&5
(eval "$ac_compiler -v >&5") 2>&5
ac_status=$?
echo "$as_me:9049: \$? = $ac_status" >&5
(exit $ac_status); }
{ (ac_try="$ac_compiler -V >&5"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:9056: $ac_try_echo\"") >&5
(eval "$ac_compiler -V >&5") 2>&5
ac_status=$?
echo "$as_me:9059: \$? = $ac_status" >&5
(exit $ac_status); }
rm -f a.out
# If we don't use `.F' as extension, the preprocessor is not run on the
# input file. (Note that this only needs to work for GNU compilers.)
ac_save_ext=$ac_ext
ac_ext=F
{ echo "$as_me:9067: checking whether we are using the GNU Fortran 77 compiler" >&5
echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; }
if test "${ac_cv_f77_compiler_gnu+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
program main
#ifndef __GNUC__
choke me
#endif
end
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:9086: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:9092: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_f77_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_compiler_gnu=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_compiler_gnu=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_cv_f77_compiler_gnu=$ac_compiler_gnu
fi
{ echo "$as_me:9109: result: $ac_cv_f77_compiler_gnu" >&5
echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; }
ac_ext=$ac_save_ext
ac_test_FFLAGS=${FFLAGS+set}
ac_save_FFLAGS=$FFLAGS
FFLAGS=
{ echo "$as_me:9115: checking whether $F77 accepts -g" >&5
echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; }
if test "${ac_cv_prog_f77_g+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
FFLAGS=-g
cat >conftest.$ac_ext <<_ACEOF
program main
end
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:9132: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:9138: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_f77_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_prog_f77_g=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_prog_f77_g=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:9154: result: $ac_cv_prog_f77_g" >&5
echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; }
if test "$ac_test_FFLAGS" = set; then
FFLAGS=$ac_save_FFLAGS
elif test $ac_cv_prog_f77_g = yes; then
if test "x$ac_cv_f77_compiler_gnu" = xyes; then
FFLAGS="-g -O2"
else
FFLAGS="-g"
fi
else
if test "x$ac_cv_f77_compiler_gnu" = xyes; then
FFLAGS="-O2"
else
FFLAGS=
fi
fi
G77=`test $ac_compiler_gnu = yes && echo yes`
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
# find the maximum length of command line arguments
{ echo "$as_me:9184: checking the maximum length of command line arguments" >&5
echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; }
if test "${lt_cv_sys_max_cmd_len+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
i=0
testring="ABCD"
case $build_os in
msdosdjgpp*)
# On DJGPP, this test can blow up pretty badly due to problems in libc
# (any single argument exceeding 2000 bytes causes a buffer overrun
# during glob expansion). Even if it were fixed, the result of this
# check would be larger than it should be.
lt_cv_sys_max_cmd_len=12288; # 12K is about right
;;
gnu*)
# Under GNU Hurd, this test is not required because there is
# no limit to the length of command line arguments.
# Libtool will interpret -1 as no limit whatsoever
lt_cv_sys_max_cmd_len=-1;
;;
cygwin* | mingw*)
# On Win9x/ME, this test blows up -- it succeeds, but takes
# about 5 minutes as the teststring grows exponentially.
# Worse, since 9x/ME are not pre-emptively multitasking,
# you end up with a "frozen" computer, even though with patience
# the test eventually succeeds (with a max line length of 256k).
# Instead, let's just punt: use the minimum linelength reported by
# all of the supported platforms: 8192 (on NT/2K/XP).
lt_cv_sys_max_cmd_len=8192;
;;
*)
# If test is not a shell built-in, we'll probably end up computing a
# maximum length that is only half of the actual maximum length, but
# we can't tell.
while (test "X"`$CONFIG_SHELL $0 --fallback-echo "X$testring" 2>/dev/null` \
= "XX$testring") >/dev/null 2>&1 &&
new_result=`expr "X$testring" : ".*" 2>&1` &&
lt_cv_sys_max_cmd_len=$new_result &&
test $i != 17 # 1/2 MB should be enough
do
i=`expr $i + 1`
testring=$testring$testring
done
testring=
# Add a significant safety factor because C++ compilers can tack on massive
# amounts of additional arguments before passing them to the linker.
# It appears as though 1/2 is a usable value.
lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2`
;;
esac
fi
if test -n $lt_cv_sys_max_cmd_len ; then
{ echo "$as_me:9243: result: $lt_cv_sys_max_cmd_len" >&5
echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; }
else
{ echo "$as_me:9246: result: none" >&5
echo "${ECHO_T}none" >&6; }
fi
# Check for command to grab the raw symbol name followed by C symbol from nm.
{ echo "$as_me:9254: checking command to parse $NM output from $compiler object" >&5
echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; }
if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# These are sane defaults that work on at least a few old systems.
# [They come from Ultrix. What could be older than Ultrix?!! ;)]
# Character class describing NM global symbol codes.
symcode='[BCDEGRST]'
# Regexp to match symbols that can be accessed directly from C.
sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
# Transform the above into a raw symbol and a C symbol.
symxfrm='\1 \2\3 \3'
# Transform an extracted symbol line into a proper C declaration
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'"
# Transform an extracted symbol line into symbol name and symbol address
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
# Define system-specific variables.
case $host_os in
aix*)
symcode='[BCDT]'
;;
cygwin* | mingw* | pw32*)
symcode='[ABCDGISTW]'
;;
hpux*) # Its linker distinguishes data from code symbols
if test "$host_cpu" = ia64; then
symcode='[ABCDEGRST]'
fi
lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'"
lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'"
;;
irix* | nonstopux*)
symcode='[BCDEGRST]'
;;
osf*)
symcode='[BCDEGQRST]'
;;
solaris* | sysv5*)
symcode='[BDT]'
;;
sysv4)
symcode='[DFNSTU]'
;;
esac
# Handle CRLF in mingw tool chain
opt_cr=
case $build_os in
mingw*)
opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
case `$NM -V 2>&1` in
*GNU* | *'with BFD'*)
symcode='[ABCDGISTW]' ;;
esac
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
# Write the raw and C identifiers.
lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"
# Check to see that the pipe works correctly.
pipe_works=no
rm -f conftest*
cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func();return(0);}
EOF
if { (eval echo "$as_me:9343: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:9346: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Now try to grab the symbols.
nlist=conftest.nm
if { (eval echo "$as_me:9350: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5
(eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5
ac_status=$?
echo "$as_me:9353: \$? = $ac_status" >&5
(exit $ac_status); } && test -s "$nlist"; then
# Try sorting and uniquifying the output.
if sort "$nlist" | uniq > "$nlist"T; then
mv -f "$nlist"T "$nlist"
else
rm -f "$nlist"T
fi
# Make sure that we snagged all the symbols we need.
if grep ' nm_test_var$' "$nlist" >/dev/null; then
if grep ' nm_test_func$' "$nlist" >/dev/null; then
cat <<EOF > conftest.$ac_ext
#ifdef __cplusplus
extern "C" {
#endif
EOF
# Now generate the symbol file.
eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext'
cat <<EOF >> conftest.$ac_ext
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
lt_ptr_t address;
}
lt_preloaded_symbols[] =
{
EOF
$SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext
cat <<\EOF >> conftest.$ac_ext
{0, (lt_ptr_t) 0}
};
#ifdef __cplusplus
}
#endif
EOF
# Now try linking the two files.
mv conftest.$ac_objext conftstm.$ac_objext
lt_save_LIBS="$LIBS"
lt_save_CFLAGS="$CFLAGS"
LIBS="conftstm.$ac_objext"
CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag"
if { (eval echo "$as_me:9405: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:9408: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext}; then
pipe_works=yes
fi
LIBS="$lt_save_LIBS"
CFLAGS="$lt_save_CFLAGS"
else
echo "cannot find nm_test_func in $nlist" >&5
fi
else
echo "cannot find nm_test_var in $nlist" >&5
fi
else
echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5
fi
else
echo "$progname: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest* conftst*
# Do not use the global_symbol_pipe unless it works.
if test "$pipe_works" = yes; then
break
else
lt_cv_sys_global_symbol_pipe=
fi
done
fi
if test -z "$lt_cv_sys_global_symbol_pipe"; then
lt_cv_sys_global_symbol_to_cdecl=
fi
if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then
{ echo "$as_me:9443: result: failed" >&5
echo "${ECHO_T}failed" >&6; }
else
{ echo "$as_me:9446: result: ok" >&5
echo "${ECHO_T}ok" >&6; }
fi
{ echo "$as_me:9450: checking for objdir" >&5
echo $ECHO_N "checking for objdir... $ECHO_C" >&6; }
if test "${lt_cv_objdir+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
rm -f .libs 2>/dev/null
mkdir .libs 2>/dev/null
if test -d .libs; then
lt_cv_objdir=.libs
else
# MS-DOS does not allow filenames that begin with a dot.
lt_cv_objdir=_libs
fi
rmdir .libs 2>/dev/null
fi
{ echo "$as_me:9465: result: $lt_cv_objdir" >&5
echo "${ECHO_T}$lt_cv_objdir" >&6; }
objdir=$lt_cv_objdir
case $host_os in
aix3*)
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
;;
esac
# Sed substitution that helps us do robust quoting. It backslashifies
# metacharacters that are still active within double-quoted strings.
Xsed='sed -e s/^X//'
sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'
# Same as above, but do not quote variable references.
double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'
# Sed substitution to delay expansion of an escaped shell variable in a
# double_quote_subst'ed string.
delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g'
# Sed substitution to avoid accidental globbing in evaled expressions
no_glob_subst='s/\*/\\\*/g'
# Constants:
rm="rm -f"
# Global variables:
default_ofile=libtool
can_build_shared=yes
# All known linkers require a `.a' archive for static linking (except M$VC,
# which needs '.lib').
libext=a
ltmain="$ac_aux_dir/ltmain.sh"
ofile="$default_ofile"
with_gnu_ld="$lt_cv_prog_gnu_ld"
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
{ echo "$as_me:9517: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_AR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$AR"; then
ac_cv_prog_AR="$AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_AR="${ac_tool_prefix}ar"
echo "$as_me:9533: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
AR=$ac_cv_prog_AR
if test -n "$AR"; then
{ echo "$as_me:9544: result: $AR" >&5
echo "${ECHO_T}$AR" >&6; }
else
{ echo "$as_me:9547: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$ac_cv_prog_AR"; then
ac_ct_AR=$AR
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
{ echo "$as_me:9557: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_AR+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_AR"; then
ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_AR="ar"
echo "$as_me:9573: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_AR=$ac_cv_prog_ac_ct_AR
if test -n "$ac_ct_AR"; then
{ echo "$as_me:9584: result: $ac_ct_AR" >&5
echo "${ECHO_T}$ac_ct_AR" >&6; }
else
{ echo "$as_me:9587: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_AR" = x; then
AR="false"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:9596: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
AR=$ac_ct_AR
fi
else
AR="$ac_cv_prog_AR"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
{ echo "$as_me:9613: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$RANLIB"; then
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
echo "$as_me:9629: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
RANLIB=$ac_cv_prog_RANLIB
if test -n "$RANLIB"; then
{ echo "$as_me:9640: result: $RANLIB" >&5
echo "${ECHO_T}$RANLIB" >&6; }
else
{ echo "$as_me:9643: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$ac_cv_prog_RANLIB"; then
ac_ct_RANLIB=$RANLIB
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
{ echo "$as_me:9653: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_RANLIB"; then
ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_RANLIB="ranlib"
echo "$as_me:9669: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB
if test -n "$ac_ct_RANLIB"; then
{ echo "$as_me:9680: result: $ac_ct_RANLIB" >&5
echo "${ECHO_T}$ac_ct_RANLIB" >&6; }
else
{ echo "$as_me:9683: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_RANLIB" = x; then
RANLIB=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:9692: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
RANLIB=$ac_ct_RANLIB
fi
else
RANLIB="$ac_cv_prog_RANLIB"
fi
if test -n "$ac_tool_prefix"; then
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
{ echo "$as_me:9709: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$STRIP"; then
ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_STRIP="${ac_tool_prefix}strip"
echo "$as_me:9725: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
STRIP=$ac_cv_prog_STRIP
if test -n "$STRIP"; then
{ echo "$as_me:9736: result: $STRIP" >&5
echo "${ECHO_T}$STRIP" >&6; }
else
{ echo "$as_me:9739: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test -z "$ac_cv_prog_STRIP"; then
ac_ct_STRIP=$STRIP
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
{ echo "$as_me:9749: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -n "$ac_ct_STRIP"; then
ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test.
else
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_prog_ac_ct_STRIP="strip"
echo "$as_me:9765: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
fi
fi
ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP
if test -n "$ac_ct_STRIP"; then
{ echo "$as_me:9776: result: $ac_ct_STRIP" >&5
echo "${ECHO_T}$ac_ct_STRIP" >&6; }
else
{ echo "$as_me:9779: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "x$ac_ct_STRIP" = x; then
STRIP=":"
else
case $cross_compiling:$ac_tool_warned in
yes:)
{ echo "$as_me:9788: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&5
echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools
whose name does not start with the host triplet. If you think this
configuration is useful to you, please write to autoconf@gnu.org." >&2;}
ac_tool_warned=yes ;;
esac
STRIP=$ac_ct_STRIP
fi
else
STRIP="$ac_cv_prog_STRIP"
fi
old_CC="$CC"
old_CFLAGS="$CFLAGS"
# Set sane defaults for various variables
test -z "$AR" && AR=ar
test -z "$AR_FLAGS" && AR_FLAGS=cru
test -z "$AS" && AS=as
test -z "$CC" && CC=cc
test -z "$LTCC" && LTCC=$CC
test -z "$DLLTOOL" && DLLTOOL=dlltool
test -z "$LD" && LD=ld
test -z "$LN_S" && LN_S="ln -s"
test -z "$MAGIC_CMD" && MAGIC_CMD=file
test -z "$NM" && NM=nm
test -z "$SED" && SED=sed
test -z "$OBJDUMP" && OBJDUMP=objdump
test -z "$RANLIB" && RANLIB=:
test -z "$STRIP" && STRIP=:
test -z "$ac_objext" && ac_objext=o
# Determine commands to create old-style static archives.
old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs'
old_postinstall_cmds='chmod 644 $oldlib'
old_postuninstall_cmds=
if test -n "$RANLIB"; then
case $host_os in
openbsd*)
old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds"
;;
*)
old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds"
;;
esac
old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib"
fi
# Only perform the check for file, if the check method requires it
case $deplibs_check_method in
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
{ echo "$as_me:9844: checking for ${ac_tool_prefix}file" >&5
echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; }
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD="$MAGIC_CMD"
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/${ac_tool_prefix}file; then
lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$lt_save_ifs"
MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
{ echo "$as_me:9897: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6; }
else
{ echo "$as_me:9900: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
{ echo "$as_me:9906: checking for file" >&5
echo $ECHO_N "checking for file... $ECHO_C" >&6; }
if test "${lt_cv_path_MAGIC_CMD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $MAGIC_CMD in
[\\/*] | ?:[\\/]*)
lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
;;
*)
lt_save_MAGIC_CMD="$MAGIC_CMD"
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
ac_dummy="/usr/bin$PATH_SEPARATOR$PATH"
for ac_dir in $ac_dummy; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/file; then
lt_cv_path_MAGIC_CMD="$ac_dir/file"
if test -n "$file_magic_test_file"; then
case $deplibs_check_method in
"file_magic "*)
file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
$EGREP "$file_magic_regex" > /dev/null; then
:
else
cat <<EOF 1>&2
*** Warning: the command libtool uses to detect shared libraries,
*** $file_magic_cmd, produces output that libtool cannot recognize.
*** The result is that libtool may fail to recognize shared libraries
*** as such. This will affect the creation of libtool libraries that
*** depend on shared libraries, but programs linked with such libtool
*** libraries will work regardless of this problem. Nevertheless, you
*** may want to report the problem to your system manager and/or to
*** bug-libtool@gnu.org
EOF
fi ;;
esac
fi
break
fi
done
IFS="$lt_save_ifs"
MAGIC_CMD="$lt_save_MAGIC_CMD"
;;
esac
fi
MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
if test -n "$MAGIC_CMD"; then
{ echo "$as_me:9959: result: $MAGIC_CMD" >&5
echo "${ECHO_T}$MAGIC_CMD" >&6; }
else
{ echo "$as_me:9962: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
else
MAGIC_CMD=:
fi
fi
fi
;;
esac
enable_dlopen=yes
enable_win32_dll=no
# Check whether --enable-libtool-lock was given.
if test "${enable_libtool_lock+set}" = set; then
enableval=$enable_libtool_lock;
fi
test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes
# Check whether --with-pic was given.
if test "${with_pic+set}" = set; then
withval=$with_pic; pic_mode="$withval"
else
pic_mode=default
fi
test -z "$pic_mode" && pic_mode=default
# Use C for the default configuration in the libtool script
tagname=
lt_save_CC="$CC"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
# Source file extension for C test sources.
ac_ext=c
# Object file extension for compiled C test sources.
objext=o
objext=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(){return(0);}\n'
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
#
# Check for any special shared library compilation flags.
#
lt_prog_cc_shlib=
if test "$GCC" = no; then
case $host_os in
sco3.2v5*)
lt_prog_cc_shlib='-belf'
;;
esac
fi
if test -n "$lt_prog_cc_shlib"; then
{ echo "$as_me:10038: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&5
echo "$as_me: WARNING: \`$CC' requires \`$lt_prog_cc_shlib' to build shared libraries" >&2;}
if echo "$old_CC $old_CFLAGS " | grep "[ ]$lt_prog_cc_shlib[ ]" >/dev/null; then :
else
{ echo "$as_me:10042: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5
echo "$as_me: WARNING: add \`$lt_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;}
lt_cv_prog_cc_can_build_shared=no
fi
fi
#
# Check to make sure the static flag actually works.
#
{ echo "$as_me:10052: checking if $compiler static flag $lt_prog_compiler_static works" >&5
echo $ECHO_N "checking if $compiler static flag $lt_prog_compiler_static works... $ECHO_C" >&6; }
if test "${lt_prog_compiler_static_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_prog_compiler_static_works=no
save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $lt_prog_compiler_static"
printf "$lt_simple_link_test_code" > conftest.$ac_ext
if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test -s conftest.err; then
# Append any errors to the config.log.
cat conftest.err 1>&5
else
lt_prog_compiler_static_works=yes
fi
fi
$rm conftest*
LDFLAGS="$save_LDFLAGS"
fi
{ echo "$as_me:10075: result: $lt_prog_compiler_static_works" >&5
echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; }
if test x"$lt_prog_compiler_static_works" = xyes; then
:
else
lt_prog_compiler_static=
fi
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
lt_prog_compiler_no_builtin_flag=
if test "$GCC" = yes; then
lt_prog_compiler_no_builtin_flag=' -fno-builtin'
{ echo "$as_me:10097: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:10115: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:10119: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:10130: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions"
else
:
fi
fi
lt_prog_compiler_wl=
lt_prog_compiler_pic=
lt_prog_compiler_static=
{ echo "$as_me:10145: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
if test "$GCC" = yes; then
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_static='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
fi
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4'
;;
beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic='-fno-common'
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
lt_prog_compiler_can_build_shared=no
enable_shared=no
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic='-fPIC'
;;
esac
;;
*)
lt_prog_compiler_pic='-fPIC'
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static='-Bstatic'
else
lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp'
fi
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic='-DDLL_EXPORT'
;;
hpux9* | hpux10* | hpux11*)
lt_prog_compiler_wl='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
lt_prog_compiler_static='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
lt_prog_compiler_wl='-Wl,'
# PIC (with -KPIC) is the default.
lt_prog_compiler_static='-non_shared'
;;
newsos6)
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
linux*)
case $CC in
icc* | ecc*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-static'
;;
ccc*)
lt_prog_compiler_wl='-Wl,'
# All Alpha code is PIC.
lt_prog_compiler_static='-non_shared'
;;
esac
;;
osf3* | osf4* | osf5*)
lt_prog_compiler_wl='-Wl,'
# All OSF/1 code is PIC.
lt_prog_compiler_static='-non_shared'
;;
sco3.2v5*)
lt_prog_compiler_pic='-Kpic'
lt_prog_compiler_static='-dn'
;;
solaris*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
sunos4*)
lt_prog_compiler_wl='-Qoption ld '
lt_prog_compiler_pic='-PIC'
lt_prog_compiler_static='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_prog_compiler_wl='-Wl,'
lt_prog_compiler_pic='-KPIC'
lt_prog_compiler_static='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_prog_compiler_pic='-Kconform_pic'
lt_prog_compiler_static='-Bstatic'
fi
;;
uts4*)
lt_prog_compiler_pic='-pic'
lt_prog_compiler_static='-Bstatic'
;;
*)
lt_prog_compiler_can_build_shared=no
;;
esac
fi
{ echo "$as_me:10322: result: $lt_prog_compiler_pic" >&5
echo "${ECHO_T}$lt_prog_compiler_pic" >&6; }
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic"; then
{ echo "$as_me:10330: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; }
if test "${lt_prog_compiler_pic_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_prog_compiler_pic_works=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:10348: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:10352: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_prog_compiler_pic_works=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:10363: result: $lt_prog_compiler_pic_works" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; }
if test x"$lt_prog_compiler_pic_works" = xyes; then
case $lt_prog_compiler_pic in
"" | " "*) ;;
*) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;;
esac
else
lt_prog_compiler_pic=
lt_prog_compiler_can_build_shared=no
fi
fi
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic=
;;
*)
lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC"
;;
esac
{ echo "$as_me:10387: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o=no
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:10415: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:10419: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s out/conftest.err; then
lt_cv_prog_compiler_c_o=yes
fi
fi
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm conftest*
fi
{ echo "$as_me:10436: result: $lt_cv_prog_compiler_c_o" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; }
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:10443: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ echo "$as_me:10451: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6; }
if test "$hard_links" = no; then
{ echo "$as_me:10454: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
{ echo "$as_me:10462: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
runpath_var=
allow_undefined_flag=
enable_shared_with_static_runtimes=no
archive_cmds=
archive_expsym_cmds=
old_archive_From_new_cmds=
old_archive_from_expsyms_cmds=
export_dynamic_flag_spec=
whole_archive_flag_spec=
thread_safe_flag_spec=
hardcode_libdir_flag_spec=
hardcode_libdir_flag_spec_ld=
hardcode_libdir_separator=
hardcode_direct=no
hardcode_minus_L=no
hardcode_shlibpath_var=unsupported
link_all_deplibs=unknown
hardcode_automatic=no
module_cmds=
module_expsym_cmds=
always_export_symbols=no
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
EOF
fi
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can't use
# them.
ld_shlibs=no
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs=no
fi
;;
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec='-L$libdir'
allow_undefined_flag=no
always_export_symbols=no
enable_shared_with_static_runtimes=yes
export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
ld_shlibs=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris* | sysv5*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs=no
cat <<EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
sunos4*)
archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs=no
fi
;;
esac
if test "$ld_shlibs" = yes; then
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec=
fi
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag=unsupported
always_export_symbols=yes
archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L=yes
if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct=unsupported
fi
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
# KDE requires run time linking. Make it the default.
aix_use_runtimelinking=yes
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds=''
hardcode_direct=yes
hardcode_libdir_separator=':'
link_all_deplibs=yes
if test "$GCC" = yes; then
case $host_os in aix4.012|aix4.012.*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct=yes
else
# We have old collect2
hardcode_direct=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L=yes
hardcode_libdir_flag_spec='-L$libdir'
hardcode_libdir_separator=
fi
esac
shared_flag='-shared'
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='-qmkshrobj ${wl}-G'
else
shared_flag='-qmkshrobj'
fi
fi
fi
# Let the compiler handle the export list.
always_export_symbols=no
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag='-berok'
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:10763: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:10769: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_cmds="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag="-z nodefs"
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:10823: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:10829: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag=' ${wl}-bernotok'
allow_undefined_flag=' ${wl}-berok'
# -bexpall does not export symbols beginning with underscore (_)
always_export_symbols=yes
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec=' '
archive_cmds_need_lc=yes
# This is similar to how AIX traditionally builds it's shared libraries.
archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
# see comment about different semantics on the GNU ld section
ld_shlibs=no
;;
bsdi4*)
export_dynamic_flag_spec=-rdynamic
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec=' '
allow_undefined_flag=no
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes=yes
;;
darwin* | rhapsody*)
if test "$GXX" = yes ; then
archive_cmds_need_lc=no
case "$host_os" in
rhapsody* | darwin1.[012])
allow_undefined_flag='-Wl,-undefined -Wl,suppress'
;;
*) # Darwin 1.3 on
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.012)
allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
;;
10.*)
allow_undefined_flag='-Wl,-undefined -Wl,dynamic_lookup'
;;
esac
fi
;;
esac
lt_int_apple_cc_single_mod=no
output_verbose_link_cmd='echo'
if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
lt_int_apple_cc_single_mod=yes
fi
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_cmds='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
else
archive_cmds='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
fi
module_cmds='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
whole_archive_flag_spec='-all_load $convenience'
link_all_deplibs=yes
else
ld_shlibs=no
fi
;;
dgux*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
freebsd1*)
ld_shlibs=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | kfreebsd*-gnu)
archive_cmds='$CC -shared -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
hpux9*)
if test "$GCC" = yes; then
archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
export_dynamic_flag_spec='${wl}-E'
;;
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
;;
*)
archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs'
;;
esac
else
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
*)
archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
;;
esac
fi
if test "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld='+b $libdir'
hardcode_libdir_separator=:
hardcode_direct=no
hardcode_shlibpath_var=no
;;
ia64*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=no
hardcode_shlibpath_var=no
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
*)
hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_direct=yes
export_dynamic_flag_spec='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld='-rpath $libdir'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
link_all_deplibs=yes
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_direct=yes
hardcode_shlibpath_var=no
;;
newsos6)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
hardcode_shlibpath_var=no
;;
openbsd*)
hardcode_direct=yes
hardcode_shlibpath_var=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
export_dynamic_flag_spec='${wl}-E'
else
case $host_os in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-R$libdir'
;;
*)
archive_cmds='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec='${wl}-rpath,$libdir'
;;
esac
fi
;;
os2*)
hardcode_libdir_flag_spec='-L$libdir'
hardcode_minus_L=yes
allow_undefined_flag=unsupported
archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def'
old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag=' -expect_unresolved \*'
archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec='-rpath $libdir'
fi
hardcode_libdir_separator=:
;;
sco3.2v5*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
export_dynamic_flag_spec='${wl}-Bexport'
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
;;
solaris*)
no_undefined_flag=' -z text'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp'
else
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
fi
hardcode_libdir_flag_spec='-R$libdir'
hardcode_shlibpath_var=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*) # Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;;
esac
link_all_deplibs=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec='-L$libdir'
hardcode_direct=yes
hardcode_minus_L=yes
hardcode_shlibpath_var=no
;;
sysv4)
case $host_vendor in
sni)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
reload_cmds='$CC -r -o $output$reload_objs'
hardcode_direct=no
;;
motorola)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
sysv4.3*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
export_dynamic_flag_spec='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs=yes
fi
;;
sysv4.2uw2*)
archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct=yes
hardcode_minus_L=no
hardcode_shlibpath_var=no
hardcode_runpath_var=yes
runpath_var=LD_RUN_PATH
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag='${wl}-z ${wl}text'
if test "$GCC" = yes; then
archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var=no
;;
sysv5*)
no_undefined_flag=' -z text'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec=
hardcode_shlibpath_var=no
runpath_var='LD_RUN_PATH'
;;
uts4*)
archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec='-L$libdir'
hardcode_shlibpath_var=no
;;
*)
ld_shlibs=no
;;
esac
fi
{ echo "$as_me:11270: result: $ld_shlibs" >&5
echo "${ECHO_T}$ld_shlibs" >&6; }
test "$ld_shlibs" = no && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:11296: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:11301: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:11304: \$? = $ac_status" >&5
(exit $ac_status); } 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_prog_compiler_wl
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag
allow_undefined_flag=
if { (eval echo "$as_me:11318: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
(eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:11321: \$? = $ac_status" >&5
(exit $ac_status); }
then
archive_cmds_need_lc=no
else
archive_cmds_need_lc=yes
fi
allow_undefined_flag=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$rm conftest*
{ echo "$as_me:11333: result: $archive_cmds_need_lc" >&5
echo "${ECHO_T}$archive_cmds_need_lc" >&6; }
;;
esac
fi
;;
esac
{ echo "$as_me:11341: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}${shared_ext}$major'
;;
aix4* | aix5*)
version_type=linux
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}${shared_ext}$major'
fi
shlibpath_var=LIBPATH
fi
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}${shared_ext}'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
shrext=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin* | yes,mingw* | yes,pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
;;
esac
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
else
sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
kfreebsd*-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='GNU ld.so'
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
freebsd3.01* | freebsdelf3.01*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
*) # from 3.2 on
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case "$host_cpu" in
ia64*)
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
if test "X$HPUX_IA64_MODE" = X32; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
version_type=linux
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
libsuff=
if test "x$LINUX_64_MODE" = x64; then
# Some platforms are per default 64-bit, so there's no /lib64
if test -d /lib64 -a ! -h /lib64; then
libsuff=64
fi
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
nto-qnx*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
;;
os2*)
libname_spec='$name'
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ echo "$as_me:11859: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
{ echo "$as_me:11863: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
hardcode_action=
if test -n "$hardcode_libdir_flag_spec" || \
test -n "$runpath_var " || \
test "X$hardcode_automatic"="Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no &&
test "$hardcode_minus_L" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action=unsupported
fi
{ echo "$as_me:11888: result: $hardcode_action" >&5
echo "${ECHO_T}$hardcode_action" >&6; }
if test "$hardcode_action" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
striplib=
old_striplib=
{ echo "$as_me:11902: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ echo "$as_me:11907: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
{ echo "$as_me:11915: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ echo "$as_me:11918: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
;;
*)
{ echo "$as_me:11923: result: no" >&5
echo "${ECHO_T}no" >&6; }
;;
esac
fi
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
{ echo "$as_me:11956: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:11991: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:11997: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:12015: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
lt_cv_dlopen="dyld"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
fi
;;
*)
{ echo "$as_me:12030: checking for shl_load" >&5
echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
if test "${ac_cv_func_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define shl_load innocuous_shl_load
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef shl_load
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_shl_load || defined __stub___shl_load
choke me
#endif
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12086: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12092: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:12109: result: $ac_cv_func_shl_load" >&5
echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
if test $ac_cv_func_shl_load = yes; then
lt_cv_dlopen="shl_load"
else
{ echo "$as_me:12114: checking for shl_load in -ldld" >&5
echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12149: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12155: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:12173: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
if test $ac_cv_lib_dld_shl_load = yes; then
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
else
{ echo "$as_me:12178: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
if test "${ac_cv_func_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define dlopen innocuous_dlopen
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef dlopen
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_dlopen || defined __stub___dlopen
choke me
#endif
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12234: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12240: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:12257: result: $ac_cv_func_dlopen" >&5
echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
if test $ac_cv_func_dlopen = yes; then
lt_cv_dlopen="dlopen"
else
{ echo "$as_me:12262: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12297: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12303: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:12321: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ echo "$as_me:12326: checking for dlopen in -lsvld" >&5
echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
if test "${ac_cv_lib_svld_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12361: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12367: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:12385: result: $ac_cv_lib_svld_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
if test $ac_cv_lib_svld_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ echo "$as_me:12390: checking for dld_link in -ldld" >&5
echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_dld_link+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dld_link ();
int
main ()
{
return dld_link ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:12425: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:12431: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_dld_link=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_dld_link=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:12449: result: $ac_cv_lib_dld_dld_link" >&5
echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
if test $ac_cv_lib_dld_dld_link = yes; then
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
fi
fi
fi
fi
fi
fi
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
{ echo "$as_me:12490: checking whether a program can dlopen itself" >&5
echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12501 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:12562: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:12565: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:12583: result: $lt_cv_dlopen_self" >&5
echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
{ echo "$as_me:12588: checking whether a statically linked program can dlopen itself" >&5
echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 12599 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:12660: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:12663: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self_static=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:12681: result: $lt_cv_dlopen_self_static" >&5
echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
# Report which librarie types wil actually be built
{ echo "$as_me:12704: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
{ echo "$as_me:12706: result: $can_build_shared" >&5
echo "${ECHO_T}$can_build_shared" >&6; }
{ echo "$as_me:12709: checking whether to build shared libraries" >&5
echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4*)
if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then
test "$enable_shared" = yes && enable_static=no
fi
;;
darwin* | rhapsody*)
if test "$GCC" = yes; then
archive_cmds_need_lc=no
case "$host_os" in
rhapsody* | darwin1.[012])
allow_undefined_flag='-Wl,-undefined -Wl,suppress'
;;
*) # Darwin 1.3 on
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.012)
allow_undefined_flag='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
;;
10.*)
allow_undefined_flag='-Wl,-undefined -Wl,dynamic_lookup'
;;
esac
fi
;;
esac
output_verbose_link_cmd='echo'
archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
module_cmds='$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct=no
hardcode_automatic=yes
hardcode_shlibpath_var=unsupported
whole_archive_flag_spec='-all_load $convenience'
link_all_deplibs=yes
else
ld_shlibs=no
fi
;;
esac
{ echo "$as_me:12767: result: $enable_shared" >&5
echo "${ECHO_T}$enable_shared" >&6; }
{ echo "$as_me:12770: checking whether to build static libraries" >&5
echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
{ echo "$as_me:12774: result: $enable_static" >&5
echo "${ECHO_T}$enable_static" >&6; }
# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
# See if we are running on zsh, and set the options which allow our commands through
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
old_postinstall_cmds old_postuninstall_cmds \
compiler \
CC \
LD \
lt_prog_compiler_wl \
lt_prog_compiler_pic \
lt_prog_compiler_static \
lt_prog_compiler_no_builtin_flag \
export_dynamic_flag_spec \
thread_safe_flag_spec \
whole_archive_flag_spec \
enable_shared_with_static_runtimes \
old_archive_cmds \
old_archive_from_new_cmds \
predep_objects \
postdep_objects \
predeps \
postdeps \
compiler_lib_search_path \
archive_cmds \
archive_expsym_cmds \
postinstall_cmds \
postuninstall_cmds \
old_archive_from_expsyms_cmds \
allow_undefined_flag \
no_undefined_flag \
export_symbols_cmds \
hardcode_libdir_flag_spec \
hardcode_libdir_flag_spec_ld \
hardcode_libdir_separator \
hardcode_automatic \
module_cmds \
module_expsym_cmds \
lt_cv_prog_compiler_c_o \
exclude_expsyms \
include_expsyms; do
case $var in
old_archive_cmds | \
old_archive_from_new_cmds | \
archive_cmds | \
archive_expsym_cmds | \
module_cmds | \
module_expsym_cmds | \
old_archive_from_expsyms_cmds | \
export_symbols_cmds | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
postinstall_cmds | postuninstall_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
case $lt_echo in
*'\$0 --fallback-echo"')
lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
;;
esac
cfgfile="${ofile}T"
trap "$rm \"$cfgfile\"; exit 1" 1 2 15
$rm -f "$cfgfile"
{ echo "$as_me:12865: creating $ofile" >&5
echo "$as_me: creating $ofile" >&6;}
cat <<__EOF__ >> "$cfgfile"
#! $SHELL
# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services.
# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP)
# NOTE: Changes made to this file will be lost: look at ltmain.sh.
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
#
# This file is part of GNU Libtool:
# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# A sed program that does not truncate output.
SED=$lt_SED
# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="$SED -e s/^X//"
# The HP-UX ksh and POSIX shell print the target directory to stdout
# if CDPATH is set.
if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi
# The names of the tagged configurations supported by this script.
available_tags=
# ### BEGIN LIBTOOL CONFIG
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc
# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# A C compiler.
LTCC=$lt_LTCC
# A language-specific compiler.
CC=$lt_compiler
# Is the compiler the GNU C compiler?
with_gcc=$GCC
# An ERE matcher.
EGREP=$lt_EGREP
# The linker used to build libraries.
LD=$lt_LD
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Shared library suffix (normally ".so").
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic
pic_mode=$pic_mode
# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects
# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects
# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps
# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec
# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator
# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var
# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms
# ### END LIBTOOL CONFIG
__EOF__
case $host_os in
aix3*)
cat <<\EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program. For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test "X${COLLECT_NAMES+set}" != Xset; then
COLLECT_NAMES=
export COLLECT_NAMES
fi
EOF
;;
esac
# We use sed instead of cat because bash on DJGPP gets confused if
# if finds mixed CR/LF and LF-only lines. Since sed operates in
# text mode, it properly converts lines to CR/LF. This bash problem
# is reportedly fixed, but why not run on old versions too?
sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1)
mv -f "$cfgfile" "$ofile" || \
(rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
chmod +x "$ofile"
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
# Check whether --with-tags was given.
if test "${with_tags+set}" = set; then
withval=$with_tags; tagnames="$withval"
fi
if test -f "$ltmain" && test -n "$tagnames"; then
if test ! -f "${ofile}"; then
{ echo "$as_me:13262: WARNING: output file \`$ofile' does not exist" >&5
echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;}
fi
if test -z "$LTCC"; then
eval "`$SHELL ${ofile} --config | grep '^LTCC='`"
if test -z "$LTCC"; then
{ echo "$as_me:13269: WARNING: output file \`$ofile' does not look like a libtool script" >&5
echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;}
else
{ echo "$as_me:13272: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5
echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;}
fi
fi
# Extract list of available tagged configurations in $ofile.
# Note that this assumes the entire list is on one line.
available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'`
lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR,"
for tagname in $tagnames; do
IFS="$lt_save_ifs"
# Check whether tagname contains only valid characters
case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in
"") ;;
*) { { echo "$as_me:13287: error: invalid tag name: $tagname" >&5
echo "$as_me: error: invalid tag name: $tagname" >&2;}
{ (exit 1); exit 1; }; }
;;
esac
if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null
then
{ { echo "$as_me:13295: error: tag name \"$tagname\" already exists" >&5
echo "$as_me: error: tag name \"$tagname\" already exists" >&2;}
{ (exit 1); exit 1; }; }
fi
# Update the list of available tags.
if test -n "$tagname"; then
echo appending configuration tag \"$tagname\" to $ofile
case $tagname in
CXX)
if test -n "$CXX" && test "X$CXX" != "Xno"; then
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
archive_cmds_need_lc_CXX=no
allow_undefined_flag_CXX=
always_export_symbols_CXX=no
archive_expsym_cmds_CXX=
export_dynamic_flag_spec_CXX=
hardcode_direct_CXX=no
hardcode_libdir_flag_spec_CXX=
hardcode_libdir_flag_spec_ld_CXX=
hardcode_libdir_separator_CXX=
hardcode_minus_L_CXX=no
hardcode_automatic_CXX=no
module_cmds_CXX=
module_expsym_cmds_CXX=
link_all_deplibs_CXX=unknown
old_archive_cmds_CXX=$old_archive_cmds
no_undefined_flag_CXX=
whole_archive_flag_spec_CXX=
enable_shared_with_static_runtimes_CXX=no
# Dependencies to place before and after the object being linked:
predep_objects_CXX=
postdep_objects_CXX=
predeps_CXX=
postdeps_CXX=
compiler_lib_search_path_CXX=
# Source file extension for C++ test sources.
ac_ext=cc
# Object file extension for compiled C++ test sources.
objext=o
objext_CXX=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="int some_variable = 0;\n"
# Code to be used in simple link tests
lt_simple_link_test_code='int main(int, char *) { return(0); }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Allow CC to be a program name with arguments.
lt_save_CC=$CC
lt_save_LD=$LD
lt_save_GCC=$GCC
GCC=$GXX
lt_save_with_gnu_ld=$with_gnu_ld
lt_save_path_LD=$lt_cv_path_LD
if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then
lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx
else
unset lt_cv_prog_gnu_ld
fi
if test -n "${lt_cv_path_LDCXX+set}"; then
lt_cv_path_LD=$lt_cv_path_LDCXX
else
unset lt_cv_path_LD
fi
test -z "${LDCXX+set}" || LD=$LDCXX
CC=${CXX-"c++"}
compiler=$CC
compiler_CXX=$CC
cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
# We don't want -fno-exception wen compiling C++ code, so set the
# no_builtin_flag separately
if test "$GXX" = yes; then
lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin'
else
lt_prog_compiler_no_builtin_flag_CXX=
fi
if test "$GXX" = yes; then
# Set up default GNU C++ configuration
# Check whether --with-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes
else
with_gnu_ld=no
fi
ac_prog=ld
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
{ echo "$as_me:13409: checking for ld used by $CC" >&5
echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; }
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
*)
ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
esac
case $ac_prog in
# Accept absolute paths.
[\\/]* | ?:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
# Canonicalize the pathname of ld
ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'`
while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"`
done
test -z "$LD" && LD="$ac_prog"
;;
"")
# If it fails, then pretend we aren't using GCC.
ac_prog=ld
;;
*)
# If it is relative, then search for the first ld in PATH.
with_gnu_ld=unknown
;;
esac
elif test "$with_gnu_ld" = yes; then
{ echo "$as_me:13439: checking for GNU ld" >&5
echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; }
else
{ echo "$as_me:13442: checking for non-GNU ld" >&5
echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; }
fi
if test "${lt_cv_path_LD+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test -z "$LD"; then
lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR
for ac_dir in $PATH; do
IFS="$lt_save_ifs"
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
test "$with_gnu_ld" != no && break
;;
*)
test "$with_gnu_ld" != yes && break
;;
esac
fi
done
IFS="$lt_save_ifs"
else
lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
LD="$lt_cv_path_LD"
if test -n "$LD"; then
{ echo "$as_me:13476: result: $LD" >&5
echo "${ECHO_T}$LD" >&6; }
else
{ echo "$as_me:13479: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
test -z "$LD" && { { echo "$as_me:13482: error: no acceptable ld found in \$PATH" >&5
echo "$as_me: error: no acceptable ld found in \$PATH" >&2;}
{ (exit 1); exit 1; }; }
{ echo "$as_me:13485: checking if the linker ($LD) is GNU ld" >&5
echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; }
if test "${lt_cv_prog_gnu_ld+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
case `$LD -v 2>&1 </dev/null` in
*GNU* | *'with BFD'*)
lt_cv_prog_gnu_ld=yes
;;
*)
lt_cv_prog_gnu_ld=no
;;
esac
fi
{ echo "$as_me:13500: result: $lt_cv_prog_gnu_ld" >&5
echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; }
with_gnu_ld=$lt_cv_prog_gnu_ld
# Check if GNU C++ uses GNU ld as the underlying linker, since the
# archiving commands below assume that GNU ld is being used.
if test "$with_gnu_ld" = yes; then
archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
# If archive_cmds runs LD, not CC, wlarc should be empty
# XXX I think wlarc can be eliminated in ltcf-cxx, but I need to
# investigate it a little bit more. (MM)
wlarc='${wl}'
# ancient GNU ld didn't support --whole-archive et. al.
if eval "`$CC -print-prog-name=ld` --help 2>&1" | \
grep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec_CXX=
fi
else
with_gnu_ld=no
wlarc=
# A generic and very simple default shared library creation
# command for GNU C++ for the case where it uses the native
# linker, instead of GNU ld. If possible, this setting should
# overridden to take advantage of the native linker features on
# the platform it is being used on.
archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $lib'
fi
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
else
GXX=no
with_gnu_ld=no
wlarc=
fi
# PORTME: fill in a description of your system's C++ link characteristics
{ echo "$as_me:13551: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
ld_shlibs_CXX=yes
case $host_os in
aix3*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# KDE requires run time linking. Make it the default.
aix_use_runtimelinking=yes
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds_CXX=''
hardcode_direct_CXX=yes
hardcode_libdir_separator_CXX=':'
link_all_deplibs_CXX=yes
if test "$GXX" = yes; then
case $host_os in aix4.012|aix4.012.*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct_CXX=yes
else
# We have old collect2
hardcode_direct_CXX=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L_CXX=yes
hardcode_libdir_flag_spec_CXX='-L$libdir'
hardcode_libdir_separator_CXX=
fi
esac
shared_flag='-shared'
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='-qmkshrobj ${wl}-G'
else
shared_flag='-qmkshrobj'
fi
fi
fi
# Let the compiler handle the export list.
always_export_symbols_CXX=no
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag_CXX='-berok'
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:13649: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:13655: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_cmds_CXX="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag_CXX="-z nodefs"
archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:13710: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:13716: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag_CXX=' ${wl}-bernotok'
allow_undefined_flag_CXX=' ${wl}-berok'
# -bexpall does not export symbols beginning with underscore (_)
always_export_symbols_CXX=yes
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_CXX=' '
archive_cmds_need_lc_CXX=yes
# This is similar to how AIX traditionally builds it's shared libraries.
archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
chorus*)
case $cc_basename in
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_CXX='-L$libdir'
allow_undefined_flag_CXX=no
always_export_symbols_CXX=no
enable_shared_with_static_runtimes_CXX=yes
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared -nostdlib $output_objdir/$soname.def $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
ld_shlibs_CXX=no
fi
;;
darwin* | rhapsody*)
if test "$GXX" = yes; then
archive_cmds_need_lc_CXX=no
case "$host_os" in
rhapsody* | darwin1.[012])
allow_undefined_flag_CXX='-Wl,-undefined -Wl,suppress'
;;
*) # Darwin 1.3 on
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
allow_undefined_flag_CXX='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.012)
allow_undefined_flag_CXX='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
;;
10.*)
allow_undefined_flag_CXX='-Wl,-undefined -Wl,dynamic_lookup'
;;
esac
fi
;;
esac
lt_int_apple_cc_single_mod=no
output_verbose_link_cmd='echo'
if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
lt_int_apple_cc_single_mod=yes
fi
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
else
archive_cmds_CXX='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
fi
module_cmds_CXX='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct_CXX=no
hardcode_automatic_CXX=yes
hardcode_shlibpath_var_CXX=unsupported
whole_archive_flag_spec_CXX='-all_load $convenience'
link_all_deplibs_CXX=yes
else
ld_shlibs_CXX=no
fi
;;
dgux*)
case $cc_basename in
ec++)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
ghcx)
# Green Hills C++ Compiler
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
freebsd12*)
# C++ shared libraries reported to be fairly broken before switch to ELF
ld_shlibs_CXX=no
;;
freebsd-elf*)
archive_cmds_need_lc_CXX=no
;;
freebsd* | kfreebsd*-gnu)
# FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF
# conventions
ld_shlibs_CXX=yes
;;
gnu*)
;;
hpux9*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_CXX=:
export_dynamic_flag_spec_CXX='${wl}-E'
hardcode_direct_CXX=yes
hardcode_minus_L_CXX=yes # Not in the search PATH,
# but as the default
# location of the library.
case $cc_basename in
CC)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
aCC)
archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
fi
;;
esac
;;
hpux10*|hpux11*)
if test $with_gnu_ld = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_CXX='+b $libdir'
hardcode_libdir_separator_CXX=:
;;
ia64*)
hardcode_libdir_flag_spec_CXX='-L$libdir'
;;
*)
hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_CXX=:
export_dynamic_flag_spec_CXX='${wl}-E'
;;
esac
fi
case "$host_cpu" in
hppa*64*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
;;
ia64*)
hardcode_direct_CXX=no
hardcode_shlibpath_var_CXX=no
hardcode_minus_L_CXX=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
*)
hardcode_direct_CXX=yes
hardcode_minus_L_CXX=yes # Not in the search PATH,
# but as the default
# location of the library.
;;
esac
case $cc_basename in
CC)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
aCC)
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
*)
archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
;;
esac
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes; then
if test $with_gnu_ld = no; then
case "$host_cpu" in
ia64*|hppa*64*)
archive_cmds_CXX='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs'
;;
*)
archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
;;
esac
fi
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
fi
;;
esac
;;
irix5* | irix6*)
case $cc_basename in
CC)
# SGI C++
archive_cmds_CXX='$CC -shared -all -multigot $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
# Archives containing C++ object files must be created using
# "CC -ar", where "CC" is the IRIX C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs'
;;
*)
if test "$GXX" = yes; then
if test "$with_gnu_ld" = no; then
archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
else
archive_cmds_CXX='$CC -shared -nostdlib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib'
fi
fi
link_all_deplibs_CXX=yes
;;
esac
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
;;
linux*)
case $cc_basename in
KCC)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
icpc)
# Intel C++
with_gnu_ld=yes
archive_cmds_need_lc_CXX=no
archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
export_dynamic_flag_spec_CXX='${wl}--export-dynamic'
whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive'
;;
cxx)
# Compaq C++
archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols'
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
esac
;;
lynxos*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
m88k*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
mvs*)
case $cc_basename in
cxx)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags'
wlarc=
hardcode_libdir_flag_spec_CXX='-R$libdir'
hardcode_direct_CXX=yes
hardcode_shlibpath_var_CXX=no
fi
# Workaround some broken pre-1.5 toolchains
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"'
;;
osf3*)
case $cc_basename in
KCC)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
# Archives containing C++ object files must be created using
# "CC -Bstatic", where "CC" is the KAI C++ compiler.
old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs'
;;
RCC)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
cxx)
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_CXX='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
fi
;;
esac
;;
osf4* | osf5*)
case $cc_basename in
KCC)
# Kuck and Associates, Inc. (KAI) C++ Compiler
# KCC will only create a shared library if the output file
# ends with ".so" (or ".sl" for HP-UX), so rename the library
# to its proper name (with version) after linking.
archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects --soname $soname -o \$templib; mv \$templib $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir'
hardcode_libdir_separator_CXX=:
# Archives containing C++ object files must be created using
# the KAI C++ compiler.
old_archive_cmds_CXX='$CC -o $oldlib $oldobjs'
;;
RCC)
# Rational C++ 2.4.1
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
cxx)
allow_undefined_flag_CXX=' -expect_unresolved \*'
archive_cmds_CXX='$CC -shared${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib'
archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~
echo "-hidden">> $lib.exp~
$CC -shared$allow_undefined_flag $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~
$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-rpath $libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
;;
*)
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_CXX=:
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"'
else
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
fi
;;
esac
;;
psos*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
sco*)
archive_cmds_need_lc_CXX=no
case $cc_basename in
CC)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
sunos4*)
case $cc_basename in
CC)
# Sun C++ 4.x
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
lcc)
# Lucid
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
solaris*)
case $cc_basename in
CC)
# Sun C++ 4.2, 5.x and Centerline C++
no_undefined_flag_CXX=' -zdefs'
archive_cmds_CXX='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects'
archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
hardcode_libdir_flag_spec_CXX='-R$libdir'
hardcode_shlibpath_var_CXX=no
case $host_os in
solaris2.0-5 | solaris2.0-5.*) ;;
*)
# The C++ compiler is used as linker so we must use $wl
# flag to pass the commands to the underlying system
# linker.
# Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract'
;;
esac
link_all_deplibs_CXX=yes
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
#
# There doesn't appear to be a way to prevent this compiler from
# explicitly linking system object files so we need to strip them
# from the output so that they don't get included in the library
# dependencies.
output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[LR]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list'
# Archives containing C++ object files must be created using
# "CC -xar", where "CC" is the Sun C++ compiler. This is
# necessary to make sure instantiated templates are included
# in the archive.
old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs'
;;
gcx)
# Green Hills C++ Compiler
archive_cmds_CXX='$CC -shared $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
# The C++ compiler must be used to create the archive.
old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs'
;;
*)
# GNU C++ compiler with Solaris linker
if test "$GXX" = yes && test "$with_gnu_ld" = no; then
no_undefined_flag_CXX=' ${wl}-z ${wl}defs'
if $CC --version | grep -v '^2\.7' > /dev/null; then
archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
else
# g++ 2.7 appears to require `-G' NOT `-shared' on this
# platform.
archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects ${wl}-h $wl$soname -o $lib'
archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $compiler_flags $predep_objects $libobjs $deplibs $postdep_objects~$rm $lib.exp'
# Commands to make compiler produce verbose output that lists
# what "hidden" libraries, object files and flags are used when
# linking a shared library.
output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\""
fi
hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir'
fi
;;
esac
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
archive_cmds_need_lc_CXX=no
;;
tandem*)
case $cc_basename in
NCC)
# NonStop-UX NCC 3.20
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
;;
vxworks*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
*)
# FIXME: insert proper C++ library support
ld_shlibs_CXX=no
;;
esac
{ echo "$as_me:14361: result: $ld_shlibs_CXX" >&5
echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no
GCC_CXX="$GXX"
LD_CXX="$LD"
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
cat > conftest.$ac_ext <<EOF
class Foo
{
public:
Foo (void) { a = 0; }
private:
int a;
};
EOF
if { (eval echo "$as_me:14383: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:14386: \$? = $ac_status" >&5
(exit $ac_status); }; then
# Parse the compiler output and extract the necessary
# objects, libraries and library flags.
# Sentinel used to keep track of whether or not we are before
# the conftest object file.
pre_test_object_deps_done=no
# The `*' in the case matches for architectures that use `case' in
# $output_verbose_cmd can trigger glob expansion during the loop
# eval without this substitution.
output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`"
for p in `eval $output_verbose_link_cmd`; do
case $p in
-L* | -R* | -l*)
# Some compilers place space between "-{L,R}" and the path.
# Remove the space.
if test $p = "-L" \
|| test $p = "-R"; then
prev=$p
continue
else
prev=
fi
if test "$pre_test_object_deps_done" = no; then
case $p in
-L* | -R*)
# Internal compiler library paths should come after those
# provided the user. The postdeps already come after the
# user supplied libs so there is no need to process them.
if test -z "$compiler_lib_search_path_CXX"; then
compiler_lib_search_path_CXX="${prev}${p}"
else
compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}"
fi
;;
# The "-l" case would never come before the object being
# linked, so don't bother handling this case.
esac
else
if test -z "$postdeps_CXX"; then
postdeps_CXX="${prev}${p}"
else
postdeps_CXX="${postdeps_CXX} ${prev}${p}"
fi
fi
;;
*.$objext|*.$libext)
# This assumes that the test object file only shows up
# once in the compiler output.
if test "$p" = "conftest.$objext"; then
pre_test_object_deps_done=yes
continue
fi
if test "$pre_test_object_deps_done" = no; then
if test -z "$predep_objects_CXX"; then
predep_objects_CXX="$p"
else
predep_objects_CXX="$predep_objects_CXX $p"
fi
else
if test -z "$postdep_objects_CXX"; then
postdep_objects_CXX="$p"
else
postdep_objects_CXX="$postdep_objects_CXX $p"
fi
fi
;;
*) ;; # Ignore the rest.
esac
done
# Clean up.
rm -f a.out a.exe
else
echo "libtool.m4: error: problem compiling CXX test program"
fi
$rm -f confest.$objext
case " $postdeps_CXX " in
*" -lc "*) archive_cmds_need_lc_CXX=no ;;
esac
lt_prog_compiler_wl_CXX=
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX=
{ echo "$as_me:14482: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
# C++ specific cases for pic, static, wl, etc.
if test "$GXX" = yes; then
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_CXX='-Bstatic'
fi
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4'
;;
beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | os2* | pw32*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_CXX='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic_CXX='-fno-common'
;;
*djgpp*)
# DJGPP does not support shared libraries at all
lt_prog_compiler_pic_CXX=
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic_CXX=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
;;
*)
lt_prog_compiler_pic_CXX='-fPIC'
;;
esac
;;
*)
lt_prog_compiler_pic_CXX='-fPIC'
;;
esac
else
case $host_os in
aix4* | aix5*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_CXX='-Bstatic'
else
lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp'
fi
;;
chorus*)
case $cc_basename in
cxch68)
# Green Hills C++ Compiler
# _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a"
;;
esac
;;
dgux*)
case $cc_basename in
ec++)
lt_prog_compiler_pic_CXX='-KPIC'
;;
ghcx)
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-pic'
;;
*)
;;
esac
;;
freebsd* | kfreebsd*-gnu)
# FreeBSD uses GNU C++
;;
hpux9* | hpux10* | hpux11*)
case $cc_basename in
CC)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
if test "$host_cpu" != ia64; then
lt_prog_compiler_pic_CXX='+Z'
fi
;;
aCC)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive"
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic_CXX='+Z'
;;
esac
;;
*)
;;
esac
;;
irix5* | irix6* | nonstopux*)
case $cc_basename in
CC)
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_static_CXX='-non_shared'
# CC pic flag -KPIC is the default.
;;
*)
;;
esac
;;
linux*)
case $cc_basename in
KCC)
# KAI C++ Compiler
lt_prog_compiler_wl_CXX='--backend -Wl,'
lt_prog_compiler_pic_CXX='-fPIC'
;;
icpc)
# Intel C++
lt_prog_compiler_wl_CXX='-Wl,'
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-static'
;;
cxx)
# Compaq C++
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX='-non_shared'
;;
*)
;;
esac
;;
lynxos*)
;;
m88k*)
;;
mvs*)
case $cc_basename in
cxx)
lt_prog_compiler_pic_CXX='-W c,exportall'
;;
*)
;;
esac
;;
netbsd*)
;;
osf3* | osf4* | osf5*)
case $cc_basename in
KCC)
lt_prog_compiler_wl_CXX='--backend -Wl,'
;;
RCC)
# Rational C++ 2.4.1
lt_prog_compiler_pic_CXX='-pic'
;;
cxx)
# Digital/Compaq C++
lt_prog_compiler_wl_CXX='-Wl,'
# Make sure the PIC flag is empty. It appears that all Alpha
# Linux and Compaq Tru64 Unix objects are PIC.
lt_prog_compiler_pic_CXX=
lt_prog_compiler_static_CXX='-non_shared'
;;
*)
;;
esac
;;
psos*)
;;
sco*)
case $cc_basename in
CC)
lt_prog_compiler_pic_CXX='-fPIC'
;;
*)
;;
esac
;;
solaris*)
case $cc_basename in
CC)
# Sun C++ 4.2, 5.x and Centerline C++
lt_prog_compiler_pic_CXX='-KPIC'
lt_prog_compiler_static_CXX='-Bstatic'
lt_prog_compiler_wl_CXX='-Qoption ld '
;;
gcx)
# Green Hills C++ Compiler
lt_prog_compiler_pic_CXX='-PIC'
;;
*)
;;
esac
;;
sunos4*)
case $cc_basename in
CC)
# Sun C++ 4.x
lt_prog_compiler_pic_CXX='-pic'
lt_prog_compiler_static_CXX='-Bstatic'
;;
lcc)
# Lucid
lt_prog_compiler_pic_CXX='-pic'
;;
*)
;;
esac
;;
tandem*)
case $cc_basename in
NCC)
# NonStop-UX NCC 3.20
lt_prog_compiler_pic_CXX='-KPIC'
;;
*)
;;
esac
;;
unixware*)
;;
vxworks*)
;;
*)
lt_prog_compiler_can_build_shared_CXX=no
;;
esac
fi
{ echo "$as_me:14734: result: $lt_prog_compiler_pic_CXX" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; }
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_CXX"; then
{ echo "$as_me:14742: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; }
if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_prog_compiler_pic_works_CXX=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:14760: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:14764: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_prog_compiler_pic_works_CXX=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:14775: result: $lt_prog_compiler_pic_works_CXX" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; }
if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then
case $lt_prog_compiler_pic_CXX in
"" | " "*) ;;
*) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;;
esac
else
lt_prog_compiler_pic_CXX=
lt_prog_compiler_can_build_shared_CXX=no
fi
fi
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_CXX=
;;
*)
lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC"
;;
esac
{ echo "$as_me:14799: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o_CXX=no
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:14827: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:14831: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s out/conftest.err; then
lt_cv_prog_compiler_c_o_CXX=yes
fi
fi
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm conftest*
fi
{ echo "$as_me:14848: result: $lt_cv_prog_compiler_c_o_CXX" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; }
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:14855: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ echo "$as_me:14863: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6; }
if test "$hard_links" = no; then
{ echo "$as_me:14866: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
{ echo "$as_me:14874: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
case $host_os in
aix4* | aix5*)
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
;;
pw32*)
export_symbols_cmds_CXX="$ltdll_cmds"
;;
cygwin* | mingw*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
;;
*)
export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
;;
esac
{ echo "$as_me:14899: result: $ld_shlibs_CXX" >&5
echo "${ECHO_T}$ld_shlibs_CXX" >&6; }
test "$ld_shlibs_CXX" = no && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc_CXX" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc_CXX=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds_CXX in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:14925: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:14930: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:14933: \$? = $ac_status" >&5
(exit $ac_status); } 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_prog_compiler_wl_CXX
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag_CXX
allow_undefined_flag_CXX=
if { (eval echo "$as_me:14947: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
(eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:14950: \$? = $ac_status" >&5
(exit $ac_status); }
then
archive_cmds_need_lc_CXX=no
else
archive_cmds_need_lc_CXX=yes
fi
allow_undefined_flag_CXX=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$rm conftest*
{ echo "$as_me:14962: result: $archive_cmds_need_lc_CXX" >&5
echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; }
;;
esac
fi
;;
esac
{ echo "$as_me:14970: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}${shared_ext}$major'
;;
aix4* | aix5*)
version_type=linux
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}${shared_ext}$major'
fi
shlibpath_var=LIBPATH
fi
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}${shared_ext}'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
shrext=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin* | yes,mingw* | yes,pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
;;
esac
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
else
sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
kfreebsd*-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='GNU ld.so'
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
freebsd3.01* | freebsdelf3.01*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
*) # from 3.2 on
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case "$host_cpu" in
ia64*)
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
if test "X$HPUX_IA64_MODE" = X32; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
version_type=linux
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
libsuff=
if test "x$LINUX_64_MODE" = x64; then
# Some platforms are per default 64-bit, so there's no /lib64
if test -d /lib64 -a ! -h /lib64; then
libsuff=64
fi
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
nto-qnx*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
;;
os2*)
libname_spec='$name'
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ echo "$as_me:15488: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
{ echo "$as_me:15492: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
hardcode_action_CXX=
if test -n "$hardcode_libdir_flag_spec_CXX" || \
test -n "$runpath_var CXX" || \
test "X$hardcode_automatic_CXX"="Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_CXX" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no &&
test "$hardcode_minus_L_CXX" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action_CXX=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action_CXX=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action_CXX=unsupported
fi
{ echo "$as_me:15517: result: $hardcode_action_CXX" >&5
echo "${ECHO_T}$hardcode_action_CXX" >&6; }
if test "$hardcode_action_CXX" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
striplib=
old_striplib=
{ echo "$as_me:15531: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ echo "$as_me:15536: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
{ echo "$as_me:15544: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ echo "$as_me:15547: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
;;
*)
{ echo "$as_me:15552: result: no" >&5
echo "${ECHO_T}no" >&6; }
;;
esac
fi
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
{ echo "$as_me:15585: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15620: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15626: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:15644: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
lt_cv_dlopen="dyld"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
fi
;;
*)
{ echo "$as_me:15659: checking for shl_load" >&5
echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
if test "${ac_cv_func_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define shl_load innocuous_shl_load
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef shl_load
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_shl_load || defined __stub___shl_load
choke me
#endif
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15715: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15721: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:15738: result: $ac_cv_func_shl_load" >&5
echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
if test $ac_cv_func_shl_load = yes; then
lt_cv_dlopen="shl_load"
else
{ echo "$as_me:15743: checking for shl_load in -ldld" >&5
echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15778: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15784: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:15802: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
if test $ac_cv_lib_dld_shl_load = yes; then
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
else
{ echo "$as_me:15807: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
if test "${ac_cv_func_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define dlopen innocuous_dlopen
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef dlopen
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_dlopen || defined __stub___dlopen
choke me
#endif
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15863: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15869: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:15886: result: $ac_cv_func_dlopen" >&5
echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
if test $ac_cv_func_dlopen = yes; then
lt_cv_dlopen="dlopen"
else
{ echo "$as_me:15891: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15926: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15932: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:15950: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ echo "$as_me:15955: checking for dlopen in -lsvld" >&5
echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
if test "${ac_cv_lib_svld_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:15990: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:15996: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:16014: result: $ac_cv_lib_svld_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
if test $ac_cv_lib_svld_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ echo "$as_me:16019: checking for dld_link in -ldld" >&5
echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_dld_link+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dld_link ();
int
main ()
{
return dld_link ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:16054: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:16060: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_dld_link=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_dld_link=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:16078: result: $ac_cv_lib_dld_dld_link" >&5
echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
if test $ac_cv_lib_dld_dld_link = yes; then
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
fi
fi
fi
fi
fi
fi
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
{ echo "$as_me:16119: checking whether a program can dlopen itself" >&5
echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 16130 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:16191: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:16194: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:16212: result: $lt_cv_dlopen_self" >&5
echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
{ echo "$as_me:16217: checking whether a statically linked program can dlopen itself" >&5
echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 16228 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:16289: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:16292: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self_static=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:16310: result: $lt_cv_dlopen_self_static" >&5
echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
# See if we are running on zsh, and set the options which allow our commands through
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
old_postinstall_cmds old_postuninstall_cmds \
compiler_CXX \
CC_CXX \
LD_CXX \
lt_prog_compiler_wl_CXX \
lt_prog_compiler_pic_CXX \
lt_prog_compiler_static_CXX \
lt_prog_compiler_no_builtin_flag_CXX \
export_dynamic_flag_spec_CXX \
thread_safe_flag_spec_CXX \
whole_archive_flag_spec_CXX \
enable_shared_with_static_runtimes_CXX \
old_archive_cmds_CXX \
old_archive_from_new_cmds_CXX \
predep_objects_CXX \
postdep_objects_CXX \
predeps_CXX \
postdeps_CXX \
compiler_lib_search_path_CXX \
archive_cmds_CXX \
archive_expsym_cmds_CXX \
postinstall_cmds_CXX \
postuninstall_cmds_CXX \
old_archive_from_expsyms_cmds_CXX \
allow_undefined_flag_CXX \
no_undefined_flag_CXX \
export_symbols_cmds_CXX \
hardcode_libdir_flag_spec_CXX \
hardcode_libdir_flag_spec_ld_CXX \
hardcode_libdir_separator_CXX \
hardcode_automatic_CXX \
module_cmds_CXX \
module_expsym_cmds_CXX \
lt_cv_prog_compiler_c_o_CXX \
exclude_expsyms_CXX \
include_expsyms_CXX; do
case $var in
old_archive_cmds_CXX | \
old_archive_from_new_cmds_CXX | \
archive_cmds_CXX | \
archive_expsym_cmds_CXX | \
module_cmds_CXX | \
module_expsym_cmds_CXX | \
old_archive_from_expsyms_cmds_CXX | \
export_symbols_cmds_CXX | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
postinstall_cmds | postuninstall_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
case $lt_echo in
*'\$0 --fallback-echo"')
lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
;;
esac
cfgfile="$ofile"
cat <<__EOF__ >> "$cfgfile"
# ### BEGIN LIBTOOL TAG CONFIG: $tagname
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_CXX
# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# A C compiler.
LTCC=$lt_LTCC
# A language-specific compiler.
CC=$lt_compiler_CXX
# Is the compiler the GNU C compiler?
with_gcc=$GCC_CXX
# An ERE matcher.
EGREP=$lt_EGREP
# The linker used to build libraries.
LD=$lt_LD_CXX
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_CXX
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Shared library suffix (normally ".so").
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX
pic_mode=$pic_mode
# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds_CXX
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds_CXX
archive_expsym_cmds=$lt_archive_expsym_cmds_CXX
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds_CXX
module_expsym_cmds=$lt_module_expsym_cmds_CXX
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects_CXX
# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects_CXX
# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps_CXX
# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps_CXX
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_CXX
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_CXX
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_CXX
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_CXX
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX
# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX
# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct_CXX
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L_CXX
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX
# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic_CXX
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path_CXX"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_CXX
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_CXX
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_CXX
# ### END LIBTOOL TAG CONFIG: $tagname
__EOF__
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC=$lt_save_CC
LDCXX=$LD
LD=$lt_save_LD
GCC=$lt_save_GCC
with_gnu_ldcxx=$with_gnu_ld
with_gnu_ld=$lt_save_with_gnu_ld
lt_cv_path_LDCXX=$lt_cv_path_LD
lt_cv_path_LD=$lt_save_path_LD
lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld
lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld
else
tagname=""
fi
;;
F77)
if test -n "$F77" && test "X$F77" != "Xno"; then
ac_ext=f
ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5'
ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_f77_compiler_gnu
archive_cmds_need_lc_F77=no
allow_undefined_flag_F77=
always_export_symbols_F77=no
archive_expsym_cmds_F77=
export_dynamic_flag_spec_F77=
hardcode_direct_F77=no
hardcode_libdir_flag_spec_F77=
hardcode_libdir_flag_spec_ld_F77=
hardcode_libdir_separator_F77=
hardcode_minus_L_F77=no
hardcode_automatic_F77=no
module_cmds_F77=
module_expsym_cmds_F77=
link_all_deplibs_F77=unknown
old_archive_cmds_F77=$old_archive_cmds
no_undefined_flag_F77=
whole_archive_flag_spec_F77=
enable_shared_with_static_runtimes_F77=no
# Source file extension for f77 test sources.
ac_ext=f
# Object file extension for compiled f77 test sources.
objext=o
objext_F77=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code=" subroutine t\n return\n end\n"
# Code to be used in simple link tests
lt_simple_link_test_code=" program t\n end\n"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${F77-"f77"}
compiler=$CC
compiler_F77=$CC
cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'`
{ echo "$as_me:16806: checking if libtool supports shared libraries" >&5
echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; }
{ echo "$as_me:16808: result: $can_build_shared" >&5
echo "${ECHO_T}$can_build_shared" >&6; }
{ echo "$as_me:16811: checking whether to build shared libraries" >&5
echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; }
test "$can_build_shared" = "no" && enable_shared=no
# On AIX, shared libraries and static libraries use the same namespace, and
# are all built from PIC.
case "$host_os" in
aix3*)
test "$enable_shared" = yes && enable_static=no
if test -n "$RANLIB"; then
archive_cmds="$archive_cmds~\$RANLIB \$lib"
postinstall_cmds='$RANLIB $lib'
fi
;;
aix4*)
test "$enable_shared" = yes && enable_static=no
;;
esac
{ echo "$as_me:16829: result: $enable_shared" >&5
echo "${ECHO_T}$enable_shared" >&6; }
{ echo "$as_me:16832: checking whether to build static libraries" >&5
echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; }
# Make sure either enable_shared or enable_static is yes.
test "$enable_shared" = yes || enable_static=yes
{ echo "$as_me:16836: result: $enable_static" >&5
echo "${ECHO_T}$enable_static" >&6; }
test "$ld_shlibs_F77" = no && can_build_shared=no
GCC_F77="$G77"
LD_F77="$LD"
lt_prog_compiler_wl_F77=
lt_prog_compiler_pic_F77=
lt_prog_compiler_static_F77=
{ echo "$as_me:16848: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
if test "$GCC" = yes; then
lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_static_F77='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_F77='-Bstatic'
fi
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4'
;;
beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_F77='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic_F77='-fno-common'
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
lt_prog_compiler_can_build_shared_F77=no
enable_shared=no
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic_F77=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic_F77='-fPIC'
;;
esac
;;
*)
lt_prog_compiler_pic_F77='-fPIC'
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl_F77='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_F77='-Bstatic'
else
lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp'
fi
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_F77='-DDLL_EXPORT'
;;
hpux9* | hpux10* | hpux11*)
lt_prog_compiler_wl_F77='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic_F77='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
lt_prog_compiler_static_F77='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
lt_prog_compiler_wl_F77='-Wl,'
# PIC (with -KPIC) is the default.
lt_prog_compiler_static_F77='-non_shared'
;;
newsos6)
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-Bstatic'
;;
linux*)
case $CC in
icc* | ecc*)
lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-static'
;;
ccc*)
lt_prog_compiler_wl_F77='-Wl,'
# All Alpha code is PIC.
lt_prog_compiler_static_F77='-non_shared'
;;
esac
;;
osf3* | osf4* | osf5*)
lt_prog_compiler_wl_F77='-Wl,'
# All OSF/1 code is PIC.
lt_prog_compiler_static_F77='-non_shared'
;;
sco3.2v5*)
lt_prog_compiler_pic_F77='-Kpic'
lt_prog_compiler_static_F77='-dn'
;;
solaris*)
lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-Bstatic'
;;
sunos4*)
lt_prog_compiler_wl_F77='-Qoption ld '
lt_prog_compiler_pic_F77='-PIC'
lt_prog_compiler_static_F77='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_prog_compiler_wl_F77='-Wl,'
lt_prog_compiler_pic_F77='-KPIC'
lt_prog_compiler_static_F77='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_prog_compiler_pic_F77='-Kconform_pic'
lt_prog_compiler_static_F77='-Bstatic'
fi
;;
uts4*)
lt_prog_compiler_pic_F77='-pic'
lt_prog_compiler_static_F77='-Bstatic'
;;
*)
lt_prog_compiler_can_build_shared_F77=no
;;
esac
fi
{ echo "$as_me:17025: result: $lt_prog_compiler_pic_F77" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; }
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_F77"; then
{ echo "$as_me:17033: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; }
if test "${lt_prog_compiler_pic_works_F77+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_prog_compiler_pic_works_F77=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_F77"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:17051: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:17055: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_prog_compiler_pic_works_F77=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:17066: result: $lt_prog_compiler_pic_works_F77" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; }
if test x"$lt_prog_compiler_pic_works_F77" = xyes; then
case $lt_prog_compiler_pic_F77 in
"" | " "*) ;;
*) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;;
esac
else
lt_prog_compiler_pic_F77=
lt_prog_compiler_can_build_shared_F77=no
fi
fi
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_F77=
;;
*)
lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77"
;;
esac
{ echo "$as_me:17090: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o_F77=no
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:17118: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:17122: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s out/conftest.err; then
lt_cv_prog_compiler_c_o_F77=yes
fi
fi
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm conftest*
fi
{ echo "$as_me:17139: result: $lt_cv_prog_compiler_c_o_F77" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; }
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:17146: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ echo "$as_me:17154: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6; }
if test "$hard_links" = no; then
{ echo "$as_me:17157: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
{ echo "$as_me:17165: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
runpath_var=
allow_undefined_flag_F77=
enable_shared_with_static_runtimes_F77=no
archive_cmds_F77=
archive_expsym_cmds_F77=
old_archive_From_new_cmds_F77=
old_archive_from_expsyms_cmds_F77=
export_dynamic_flag_spec_F77=
whole_archive_flag_spec_F77=
thread_safe_flag_spec_F77=
hardcode_libdir_flag_spec_F77=
hardcode_libdir_flag_spec_ld_F77=
hardcode_libdir_separator_F77=
hardcode_direct_F77=no
hardcode_minus_L_F77=no
hardcode_shlibpath_var_F77=unsupported
link_all_deplibs_F77=unknown
hardcode_automatic_F77=no
module_cmds_F77=
module_expsym_cmds_F77=
always_export_symbols_F77=no
export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms_F77=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs_F77=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs_F77=no
cat <<EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
EOF
fi
;;
amigaos*)
archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_minus_L_F77=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can't use
# them.
ld_shlibs_F77=no
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag_F77=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds_F77='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs_F77=no
fi
;;
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_F77='-L$libdir'
allow_undefined_flag_F77=no
always_export_symbols_F77=no
enable_shared_with_static_runtimes_F77=yes
export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
ld_shlibs=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris* | sysv5*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs_F77=no
cat <<EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs_F77=no
fi
;;
sunos4*)
archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs_F77=no
fi
;;
esac
if test "$ld_shlibs_F77" = yes; then
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_F77='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec_F77=
fi
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag_F77=unsupported
always_export_symbols_F77=yes
archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L_F77=yes
if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct_F77=unsupported
fi
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
# KDE requires run time linking. Make it the default.
aix_use_runtimelinking=yes
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds_F77=''
hardcode_direct_F77=yes
hardcode_libdir_separator_F77=':'
link_all_deplibs_F77=yes
if test "$GCC" = yes; then
case $host_os in aix4.012|aix4.012.*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct_F77=yes
else
# We have old collect2
hardcode_direct_F77=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L_F77=yes
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_libdir_separator_F77=
fi
esac
shared_flag='-shared'
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='-qmkshrobj ${wl}-G'
else
shared_flag='-qmkshrobj'
fi
fi
fi
# Let the compiler handle the export list.
always_export_symbols_F77=no
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag_F77='-berok'
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
program main
end
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:17456: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:17462: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_f77_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_cmds_F77="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag_F77="-z nodefs"
archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
program main
end
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:17506: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:17512: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_f77_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag_F77=' ${wl}-bernotok'
allow_undefined_flag_F77=' ${wl}-berok'
# -bexpall does not export symbols beginning with underscore (_)
always_export_symbols_F77=yes
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_F77=' '
archive_cmds_need_lc_F77=yes
# This is similar to how AIX traditionally builds it's shared libraries.
archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_minus_L_F77=yes
# see comment about different semantics on the GNU ld section
ld_shlibs_F77=no
;;
bsdi4*)
export_dynamic_flag_spec_F77=-rdynamic
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_F77=' '
allow_undefined_flag_F77=no
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_F77='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds_F77='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_F77=yes
;;
darwin* | rhapsody*)
if test "$GXX" = yes ; then
archive_cmds_need_lc_F77=no
case "$host_os" in
rhapsody* | darwin1.[012])
allow_undefined_flag_F77='-Wl,-undefined -Wl,suppress'
;;
*) # Darwin 1.3 on
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
allow_undefined_flag_F77='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.012)
allow_undefined_flag_F77='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
;;
10.*)
allow_undefined_flag_F77='-Wl,-undefined -Wl,dynamic_lookup'
;;
esac
fi
;;
esac
lt_int_apple_cc_single_mod=no
output_verbose_link_cmd='echo'
if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
lt_int_apple_cc_single_mod=yes
fi
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_cmds_F77='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
else
archive_cmds_F77='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
fi
module_cmds_F77='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct_F77=no
hardcode_automatic_F77=yes
hardcode_shlibpath_var_F77=unsupported
whole_archive_flag_spec_F77='-all_load $convenience'
link_all_deplibs_F77=yes
else
ld_shlibs_F77=no
fi
;;
dgux*)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_shlibpath_var_F77=no
;;
freebsd1*)
ld_shlibs_F77=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_F77=yes
hardcode_minus_L_F77=yes
hardcode_shlibpath_var_F77=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | kfreebsd*-gnu)
archive_cmds_F77='$CC -shared -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
;;
hpux9*)
if test "$GCC" = yes; then
archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_F77=:
hardcode_direct_F77=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_F77=yes
export_dynamic_flag_spec_F77='${wl}-E'
;;
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
;;
*)
archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs'
;;
esac
else
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds_F77='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
*)
archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
;;
esac
fi
if test "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_F77='+b $libdir'
hardcode_libdir_separator_F77=:
hardcode_direct_F77=no
hardcode_shlibpath_var_F77=no
;;
ia64*)
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_direct_F77=no
hardcode_shlibpath_var_F77=no
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_F77=yes
;;
*)
hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_F77=:
hardcode_direct_F77=yes
export_dynamic_flag_spec_F77='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_F77=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds_F77='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_F77='-rpath $libdir'
fi
hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_F77=:
link_all_deplibs_F77=yes
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
;;
newsos6)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_F77=yes
hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_F77=:
hardcode_shlibpath_var_F77=no
;;
openbsd*)
hardcode_direct_F77=yes
hardcode_shlibpath_var_F77=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds_F77='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
export_dynamic_flag_spec_F77='${wl}-E'
else
case $host_os in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_F77='-R$libdir'
;;
*)
archive_cmds_F77='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir'
;;
esac
fi
;;
os2*)
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_minus_L_F77=yes
allow_undefined_flag_F77=unsupported
archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def'
old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_F77='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag_F77=' -expect_unresolved \*'
archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_F77=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_F77='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag_F77=' -expect_unresolved \*'
archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_F77='-rpath $libdir'
fi
hardcode_libdir_separator_F77=:
;;
sco3.2v5*)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_F77=no
export_dynamic_flag_spec_F77='${wl}-Bexport'
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
;;
solaris*)
no_undefined_flag_F77=' -z text'
if test "$GCC" = yes; then
archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp'
else
archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
fi
hardcode_libdir_flag_spec_F77='-R$libdir'
hardcode_shlibpath_var_F77=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*) # Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;;
esac
link_all_deplibs_F77=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_direct_F77=yes
hardcode_minus_L_F77=yes
hardcode_shlibpath_var_F77=no
;;
sysv4)
case $host_vendor in
sni)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_F77=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
reload_cmds_F77='$CC -r -o $output$reload_objs'
hardcode_direct_F77=no
;;
motorola)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_F77=no
;;
sysv4.3*)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_F77=no
export_dynamic_flag_spec_F77='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_F77=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs_F77=yes
fi
;;
sysv4.2uw2*)
archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_F77=yes
hardcode_minus_L_F77=no
hardcode_shlibpath_var_F77=no
hardcode_runpath_var=yes
runpath_var=LD_RUN_PATH
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_F77='${wl}-z ${wl}text'
if test "$GCC" = yes; then
archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds_F77='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_F77=no
;;
sysv5*)
no_undefined_flag_F77=' -z text'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec_F77=
hardcode_shlibpath_var_F77=no
runpath_var='LD_RUN_PATH'
;;
uts4*)
archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_F77='-L$libdir'
hardcode_shlibpath_var_F77=no
;;
*)
ld_shlibs_F77=no
;;
esac
fi
{ echo "$as_me:17953: result: $ld_shlibs_F77" >&5
echo "${ECHO_T}$ld_shlibs_F77" >&6; }
test "$ld_shlibs_F77" = no && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc_F77" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc_F77=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds_F77 in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:17979: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:17984: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:17987: \$? = $ac_status" >&5
(exit $ac_status); } 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_prog_compiler_wl_F77
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag_F77
allow_undefined_flag_F77=
if { (eval echo "$as_me:18001: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
(eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:18004: \$? = $ac_status" >&5
(exit $ac_status); }
then
archive_cmds_need_lc_F77=no
else
archive_cmds_need_lc_F77=yes
fi
allow_undefined_flag_F77=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$rm conftest*
{ echo "$as_me:18016: result: $archive_cmds_need_lc_F77" >&5
echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; }
;;
esac
fi
;;
esac
{ echo "$as_me:18024: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}${shared_ext}$major'
;;
aix4* | aix5*)
version_type=linux
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}${shared_ext}$major'
fi
shlibpath_var=LIBPATH
fi
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}${shared_ext}'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
shrext=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin* | yes,mingw* | yes,pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
;;
esac
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
else
sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
kfreebsd*-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='GNU ld.so'
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
freebsd3.01* | freebsdelf3.01*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
*) # from 3.2 on
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case "$host_cpu" in
ia64*)
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
if test "X$HPUX_IA64_MODE" = X32; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
version_type=linux
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
libsuff=
if test "x$LINUX_64_MODE" = x64; then
# Some platforms are per default 64-bit, so there's no /lib64
if test -d /lib64 -a ! -h /lib64; then
libsuff=64
fi
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
nto-qnx*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
;;
os2*)
libname_spec='$name'
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ echo "$as_me:18542: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
{ echo "$as_me:18546: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
hardcode_action_F77=
if test -n "$hardcode_libdir_flag_spec_F77" || \
test -n "$runpath_var F77" || \
test "X$hardcode_automatic_F77"="Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_F77" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no &&
test "$hardcode_minus_L_F77" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action_F77=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action_F77=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action_F77=unsupported
fi
{ echo "$as_me:18571: result: $hardcode_action_F77" >&5
echo "${ECHO_T}$hardcode_action_F77" >&6; }
if test "$hardcode_action_F77" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
striplib=
old_striplib=
{ echo "$as_me:18585: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ echo "$as_me:18590: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
{ echo "$as_me:18598: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ echo "$as_me:18601: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
;;
*)
{ echo "$as_me:18606: result: no" >&5
echo "${ECHO_T}no" >&6; }
;;
esac
fi
# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
# See if we are running on zsh, and set the options which allow our commands through
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
old_postinstall_cmds old_postuninstall_cmds \
compiler_F77 \
CC_F77 \
LD_F77 \
lt_prog_compiler_wl_F77 \
lt_prog_compiler_pic_F77 \
lt_prog_compiler_static_F77 \
lt_prog_compiler_no_builtin_flag_F77 \
export_dynamic_flag_spec_F77 \
thread_safe_flag_spec_F77 \
whole_archive_flag_spec_F77 \
enable_shared_with_static_runtimes_F77 \
old_archive_cmds_F77 \
old_archive_from_new_cmds_F77 \
predep_objects_F77 \
postdep_objects_F77 \
predeps_F77 \
postdeps_F77 \
compiler_lib_search_path_F77 \
archive_cmds_F77 \
archive_expsym_cmds_F77 \
postinstall_cmds_F77 \
postuninstall_cmds_F77 \
old_archive_from_expsyms_cmds_F77 \
allow_undefined_flag_F77 \
no_undefined_flag_F77 \
export_symbols_cmds_F77 \
hardcode_libdir_flag_spec_F77 \
hardcode_libdir_flag_spec_ld_F77 \
hardcode_libdir_separator_F77 \
hardcode_automatic_F77 \
module_cmds_F77 \
module_expsym_cmds_F77 \
lt_cv_prog_compiler_c_o_F77 \
exclude_expsyms_F77 \
include_expsyms_F77; do
case $var in
old_archive_cmds_F77 | \
old_archive_from_new_cmds_F77 | \
archive_cmds_F77 | \
archive_expsym_cmds_F77 | \
module_cmds_F77 | \
module_expsym_cmds_F77 | \
old_archive_from_expsyms_cmds_F77 | \
export_symbols_cmds_F77 | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
postinstall_cmds | postuninstall_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
case $lt_echo in
*'\$0 --fallback-echo"')
lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
;;
esac
cfgfile="$ofile"
cat <<__EOF__ >> "$cfgfile"
# ### BEGIN LIBTOOL TAG CONFIG: $tagname
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_F77
# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# A C compiler.
LTCC=$lt_LTCC
# A language-specific compiler.
CC=$lt_compiler_F77
# Is the compiler the GNU C compiler?
with_gcc=$GCC_F77
# An ERE matcher.
EGREP=$lt_EGREP
# The linker used to build libraries.
LD=$lt_LD_F77
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_F77
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Shared library suffix (normally ".so").
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_F77
pic_mode=$pic_mode
# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_F77
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds_F77
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds_F77
archive_expsym_cmds=$lt_archive_expsym_cmds_F77
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds_F77
module_expsym_cmds=$lt_module_expsym_cmds_F77
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects_F77
# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects_F77
# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps_F77
# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps_F77
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_F77
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_F77
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_F77
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_F77
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77
# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77
# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct_F77
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L_F77
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_F77
# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic_F77
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_F77
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path_F77"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_F77
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_F77
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_F77
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_F77
# ### END LIBTOOL TAG CONFIG: $tagname
__EOF__
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
else
tagname=""
fi
;;
GCJ)
if test -n "$GCJ" && test "X$GCJ" != "Xno"; then
# Source file extension for Java test sources.
ac_ext=java
# Object file extension for compiled Java test sources.
objext=o
objext_GCJ=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code="class foo {}\n"
# Code to be used in simple link tests
lt_simple_link_test_code='public class conftest { public static void main(String argv) {}; }\n'
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${GCJ-"gcj"}
compiler=$CC
compiler_GCJ=$CC
# GCJ did not exist at the time GCC didn't implicitly link libc in.
archive_cmds_need_lc_GCJ=no
## CAVEAT EMPTOR:
## There is no encapsulation within the following macros, do not change
## the running order or otherwise move them around unless you know exactly
## what you are doing...
lt_prog_compiler_no_builtin_flag_GCJ=
if test "$GCC" = yes; then
lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin'
{ echo "$as_me:19068: checking if $compiler supports -fno-rtti -fno-exceptions" >&5
echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_rtti_exceptions=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="-fno-rtti -fno-exceptions"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:19086: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:19090: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_cv_prog_compiler_rtti_exceptions=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:19101: result: $lt_cv_prog_compiler_rtti_exceptions" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; }
if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then
lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions"
else
:
fi
fi
lt_prog_compiler_wl_GCJ=
lt_prog_compiler_pic_GCJ=
lt_prog_compiler_static_GCJ=
{ echo "$as_me:19116: checking for $compiler option to produce PIC" >&5
echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; }
if test "$GCC" = yes; then
lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_static_GCJ='-static'
case $host_os in
aix*)
# All AIX code is PIC.
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_GCJ='-Bstatic'
fi
;;
amigaos*)
# FIXME: we need at least 68020 code to build shared libraries, but
# adding the `-m68020' flag to GCC prevents building anything better,
# like `-m68040'.
lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4'
;;
beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*)
# PIC is the default for these OSes.
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
;;
darwin* | rhapsody*)
# PIC is the default on this platform
# Common symbols not allowed in MH_DYLIB files
lt_prog_compiler_pic_GCJ='-fno-common'
;;
msdosdjgpp*)
# Just because we use GCC doesn't mean we suddenly get shared libraries
# on systems that don't support them.
lt_prog_compiler_can_build_shared_GCJ=no
enable_shared=no
;;
sysv4*MP*)
if test -d /usr/nec; then
lt_prog_compiler_pic_GCJ=-Kconform_pic
fi
;;
hpux*)
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic_GCJ='-fPIC'
;;
esac
;;
*)
lt_prog_compiler_pic_GCJ='-fPIC'
;;
esac
else
# PORTME Check for flag to pass linker flags through the system compiler.
case $host_os in
aix*)
lt_prog_compiler_wl_GCJ='-Wl,'
if test "$host_cpu" = ia64; then
# AIX 5 now supports IA64 processor
lt_prog_compiler_static_GCJ='-Bstatic'
else
lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp'
fi
;;
mingw* | pw32* | os2*)
# This hack is so that the source file can tell whether it is being
# built for inclusion in a dll (and should export symbols for example).
lt_prog_compiler_pic_GCJ='-DDLL_EXPORT'
;;
hpux9* | hpux10* | hpux11*)
lt_prog_compiler_wl_GCJ='-Wl,'
# PIC is the default for IA64 HP-UX and 64-bit HP-UX, but
# not for PA HP-UX.
case "$host_cpu" in
hppa*64*|ia64*)
# +Z the default
;;
*)
lt_prog_compiler_pic_GCJ='+Z'
;;
esac
# Is there a better lt_prog_compiler_static that works with the bundled CC?
lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive'
;;
irix5* | irix6* | nonstopux*)
lt_prog_compiler_wl_GCJ='-Wl,'
# PIC (with -KPIC) is the default.
lt_prog_compiler_static_GCJ='-non_shared'
;;
newsos6)
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-Bstatic'
;;
linux*)
case $CC in
icc* | ecc*)
lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-static'
;;
ccc*)
lt_prog_compiler_wl_GCJ='-Wl,'
# All Alpha code is PIC.
lt_prog_compiler_static_GCJ='-non_shared'
;;
esac
;;
osf3* | osf4* | osf5*)
lt_prog_compiler_wl_GCJ='-Wl,'
# All OSF/1 code is PIC.
lt_prog_compiler_static_GCJ='-non_shared'
;;
sco3.2v5*)
lt_prog_compiler_pic_GCJ='-Kpic'
lt_prog_compiler_static_GCJ='-dn'
;;
solaris*)
lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-Bstatic'
;;
sunos4*)
lt_prog_compiler_wl_GCJ='-Qoption ld '
lt_prog_compiler_pic_GCJ='-PIC'
lt_prog_compiler_static_GCJ='-Bstatic'
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
lt_prog_compiler_wl_GCJ='-Wl,'
lt_prog_compiler_pic_GCJ='-KPIC'
lt_prog_compiler_static_GCJ='-Bstatic'
;;
sysv4*MP*)
if test -d /usr/nec ;then
lt_prog_compiler_pic_GCJ='-Kconform_pic'
lt_prog_compiler_static_GCJ='-Bstatic'
fi
;;
uts4*)
lt_prog_compiler_pic_GCJ='-pic'
lt_prog_compiler_static_GCJ='-Bstatic'
;;
*)
lt_prog_compiler_can_build_shared_GCJ=no
;;
esac
fi
{ echo "$as_me:19293: result: $lt_prog_compiler_pic_GCJ" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; }
#
# Check to make sure the PIC flag actually works.
#
if test -n "$lt_prog_compiler_pic_GCJ"; then
{ echo "$as_me:19301: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5
echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; }
if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_prog_compiler_pic_works_GCJ=no
ac_outfile=conftest.$ac_objext
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
lt_compiler_flag="$lt_prog_compiler_pic_GCJ"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
# The option is referenced via a variable to avoid confusing sed.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:19319: $lt_compile\"" >&5)
(eval "$lt_compile" 2>conftest.err)
ac_status=$?
cat conftest.err >&5
echo "$as_me:19323: \$? = $ac_status" >&5
if (exit $ac_status) && test -s "$ac_outfile"; then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s conftest.err; then
lt_prog_compiler_pic_works_GCJ=yes
fi
fi
$rm conftest*
fi
{ echo "$as_me:19334: result: $lt_prog_compiler_pic_works_GCJ" >&5
echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; }
if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then
case $lt_prog_compiler_pic_GCJ in
"" | " "*) ;;
*) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;;
esac
else
lt_prog_compiler_pic_GCJ=
lt_prog_compiler_can_build_shared_GCJ=no
fi
fi
case "$host_os" in
# For platforms which do not support PIC, -DPIC is meaningless:
*djgpp*)
lt_prog_compiler_pic_GCJ=
;;
*)
lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ"
;;
esac
{ echo "$as_me:19358: checking if $compiler supports -c -o file.$ac_objext" >&5
echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; }
if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
lt_cv_prog_compiler_c_o_GCJ=no
$rm -r conftest 2>/dev/null
mkdir conftest
cd conftest
mkdir out
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
# According to Tom Tromey, Ian Lance Taylor reported there are C compilers
# that will create temporary files in the current directory regardless of
# the output directory. Thus, making CWD read-only will cause this test
# to fail, enabling locking or at least warning the user not to do parallel
# builds.
chmod -w .
lt_compiler_flag="-o out/conftest2.$ac_objext"
# Insert the option either (1) after the last *FLAGS variable, or
# (2) before a word containing "conftest.", or (3) at the end.
# Note that $ac_compile itself does not contain backslashes and begins
# with a dollar sign (not a hyphen), so the echo should work correctly.
lt_compile=`echo "$ac_compile" | $SED \
-e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \
-e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \
-e 's:$: $lt_compiler_flag:'`
(eval echo "\"\$as_me:19386: $lt_compile\"" >&5)
(eval "$lt_compile" 2>out/conftest.err)
ac_status=$?
cat out/conftest.err >&5
echo "$as_me:19390: \$? = $ac_status" >&5
if (exit $ac_status) && test -s out/conftest2.$ac_objext
then
# The compiler can only warn and ignore the option if not recognized
# So say no if there are warnings
if test ! -s out/conftest.err; then
lt_cv_prog_compiler_c_o_GCJ=yes
fi
fi
chmod u+w .
$rm conftest* out/*
rmdir out
cd ..
rmdir conftest
$rm conftest*
fi
{ echo "$as_me:19407: result: $lt_cv_prog_compiler_c_o_GCJ" >&5
echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; }
hard_links="nottested"
if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then
# do not overwrite the value of need_locks provided by the user
{ echo "$as_me:19414: checking if we can lock with hard links" >&5
echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; }
hard_links=yes
$rm conftest*
ln conftest.a conftest.b 2>/dev/null && hard_links=no
touch conftest.a
ln conftest.a conftest.b 2>&5 || hard_links=no
ln conftest.a conftest.b 2>/dev/null && hard_links=no
{ echo "$as_me:19422: result: $hard_links" >&5
echo "${ECHO_T}$hard_links" >&6; }
if test "$hard_links" = no; then
{ echo "$as_me:19425: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5
echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;}
need_locks=warn
fi
else
need_locks=no
fi
{ echo "$as_me:19433: checking whether the $compiler linker ($LD) supports shared libraries" >&5
echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; }
runpath_var=
allow_undefined_flag_GCJ=
enable_shared_with_static_runtimes_GCJ=no
archive_cmds_GCJ=
archive_expsym_cmds_GCJ=
old_archive_From_new_cmds_GCJ=
old_archive_from_expsyms_cmds_GCJ=
export_dynamic_flag_spec_GCJ=
whole_archive_flag_spec_GCJ=
thread_safe_flag_spec_GCJ=
hardcode_libdir_flag_spec_GCJ=
hardcode_libdir_flag_spec_ld_GCJ=
hardcode_libdir_separator_GCJ=
hardcode_direct_GCJ=no
hardcode_minus_L_GCJ=no
hardcode_shlibpath_var_GCJ=unsupported
link_all_deplibs_GCJ=unknown
hardcode_automatic_GCJ=no
module_cmds_GCJ=
module_expsym_cmds_GCJ=
always_export_symbols_GCJ=no
export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols'
# include_expsyms should be a list of space-separated symbols to be *always*
# included in the symbol list
include_expsyms_GCJ=
# exclude_expsyms can be an extended regexp of symbols to exclude
# it will be wrapped by ` (' and `)$', so one must not match beginning or
# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc',
# as well as any symbol that contains `d'.
exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_"
# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out
# platforms (ab)use it in PIC code, but their linkers get confused if
# the symbol is explicitly referenced. Since portable code cannot
# rely on this symbol name, it's probably fine to never include it in
# preloaded symbol tables.
extract_expsyms_cmds=
case $host_os in
cygwin* | mingw* | pw32*)
# FIXME: the MSVC++ port hasn't been tested in a loooong time
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
if test "$GCC" != yes; then
with_gnu_ld=no
fi
;;
openbsd*)
with_gnu_ld=no
;;
esac
ld_shlibs_GCJ=yes
if test "$with_gnu_ld" = yes; then
# If archive_cmds runs LD, not CC, wlarc should be empty
wlarc='${wl}'
# See if GNU ld supports shared libraries.
case $host_os in
aix3* | aix4* | aix5*)
# On AIX/PPC, the GNU linker is very broken
if test "$host_cpu" != ia64; then
ld_shlibs_GCJ=no
cat <<EOF 1>&2
*** Warning: the GNU linker, at least up to release 2.9.1, is reported
*** to be unable to reliably create shared libraries on AIX.
*** Therefore, libtool is disabling shared libraries support. If you
*** really care for shared libraries, you may want to modify your PATH
*** so that a non-GNU linker is found, and then restart.
EOF
fi
;;
amigaos*)
archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_minus_L_GCJ=yes
# Samuel A. Falvo II <kc5tja@dolphin.openprojects.net> reports
# that the semantics of dynamic libraries on AmigaOS, at least up
# to version 4, is to share data among multiple programs linked
# with the same dynamic library. Since this doesn't match the
# behavior of shared libraries on other platforms, we can't use
# them.
ld_shlibs_GCJ=no
;;
beos*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
allow_undefined_flag_GCJ=unsupported
# Joseph Beckenbach <jrb3@best.com> says some releases of gcc
# support --undefined. This deserves some investigation. FIXME
archive_cmds_GCJ='$CC -nostart $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
else
ld_shlibs_GCJ=no
fi
;;
cygwin* | mingw* | pw32*)
# _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless,
# as there is no search path for DLLs.
hardcode_libdir_flag_spec_GCJ='-L$libdir'
allow_undefined_flag_GCJ=no
always_export_symbols_GCJ=no
enable_shared_with_static_runtimes_GCJ=yes
export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols'
if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then
archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
# If the export-symbols file already is a .def file (1st line
# is EXPORTS), use it as is; otherwise, prepend...
archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then
cp $export_symbols $output_objdir/$soname.def;
else
echo EXPORTS > $output_objdir/$soname.def;
cat $export_symbols >> $output_objdir/$soname.def;
fi~
$CC -shared $output_objdir/$soname.def $compiler_flags $libobjs $deplibs -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib'
else
ld_shlibs=no
fi
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib'
wlarc=
else
archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
fi
;;
solaris* | sysv5*)
if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then
ld_shlibs_GCJ=no
cat <<EOF 1>&2
*** Warning: The releases 2.8.* of the GNU linker cannot reliably
*** create shared libraries on Solaris systems. Therefore, libtool
*** is disabling shared libraries support. We urge you to upgrade GNU
*** binutils to release 2.9.1 or newer. Another option is to modify
*** your PATH or compiler configuration so that the native linker is
*** used, and then restart.
EOF
elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs_GCJ=no
fi
;;
sunos4*)
archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags'
wlarc=
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
*)
if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then
archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname -o $lib'
archive_expsym_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib'
else
ld_shlibs_GCJ=no
fi
;;
esac
if test "$ld_shlibs_GCJ" = yes; then
runpath_var=LD_RUN_PATH
hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir'
export_dynamic_flag_spec_GCJ='${wl}--export-dynamic'
# ancient GNU ld didn't support --whole-archive et. al.
if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then
whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive'
else
whole_archive_flag_spec_GCJ=
fi
fi
else
# PORTME fill in a description of your system's linker (not GNU ld)
case $host_os in
aix3*)
allow_undefined_flag_GCJ=unsupported
always_export_symbols_GCJ=yes
archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname'
# Note: this linker hardcodes the directories in LIBPATH if there
# are no directories specified by -L.
hardcode_minus_L_GCJ=yes
if test "$GCC" = yes && test -z "$link_static_flag"; then
# Neither direct hardcoding nor static linking is supported with a
# broken collect2.
hardcode_direct_GCJ=unsupported
fi
;;
aix4* | aix5*)
if test "$host_cpu" = ia64; then
# On IA64, the linker does run time linking by default, so we don't
# have to do anything special.
aix_use_runtimelinking=no
exp_sym_flag='-Bexport'
no_entry_flag=""
else
# If we're using GNU nm, then we don't want the "-C" option.
# -C means demangle to AIX nm, but means don't demangle with GNU nm
if $NM -V 2>&1 | grep 'GNU' > /dev/null; then
export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
else
export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols'
fi
# KDE requires run time linking. Make it the default.
aix_use_runtimelinking=yes
exp_sym_flag='-bexport'
no_entry_flag='-bnoentry'
fi
# When large executables or shared objects are built, AIX ld can
# have problems creating the table of contents. If linking a library
# or program results in "error TOC overflow" add -mminimal-toc to
# CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not
# enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS.
archive_cmds_GCJ=''
hardcode_direct_GCJ=yes
hardcode_libdir_separator_GCJ=':'
link_all_deplibs_GCJ=yes
if test "$GCC" = yes; then
case $host_os in aix4.012|aix4.012.*)
# We only want to do this on AIX 4.2 and lower, the check
# below for broken collect2 doesn't work under 4.3+
collect2name=`${CC} -print-prog-name=collect2`
if test -f "$collect2name" && \
strings "$collect2name" | grep resolve_lib_name >/dev/null
then
# We have reworked collect2
hardcode_direct_GCJ=yes
else
# We have old collect2
hardcode_direct_GCJ=unsupported
# It fails to find uninstalled libraries when the uninstalled
# path is not listed in the libpath. Setting hardcode_minus_L
# to unsupported forces relinking
hardcode_minus_L_GCJ=yes
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_libdir_separator_GCJ=
fi
esac
shared_flag='-shared'
else
# not using gcc
if test "$host_cpu" = ia64; then
# VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release
# chokes on -Wl,-G. The following line is correct:
shared_flag='-G'
else
if test "$aix_use_runtimelinking" = yes; then
shared_flag='-qmkshrobj ${wl}-G'
else
shared_flag='-qmkshrobj'
fi
fi
fi
# Let the compiler handle the export list.
always_export_symbols_GCJ=no
if test "$aix_use_runtimelinking" = yes; then
# Warning - without using the other runtime loading flags (-brtl),
# -berok will link without error, but may produce a broken library.
allow_undefined_flag_GCJ='-berok'
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:19734: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:19740: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
archive_cmds_GCJ="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '" $shared_flag"
archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag"
else
if test "$host_cpu" = ia64; then
hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib'
allow_undefined_flag_GCJ="-z nodefs"
archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"
else
# Determine the default libpath from the value encoded in an empty executable.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:19794: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:19800: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`
# Check for a 64-bit object if we didn't find anything.
if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; }
}'`; fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath"
# Warning - without using the other run time loading flags,
# -berok will link without error, but may produce a broken library.
no_undefined_flag_GCJ=' ${wl}-bernotok'
allow_undefined_flag_GCJ=' ${wl}-berok'
# -bexpall does not export symbols beginning with underscore (_)
always_export_symbols_GCJ=yes
# Exported symbols can be pulled into shared objects from archives
whole_archive_flag_spec_GCJ=' '
archive_cmds_need_lc_GCJ=yes
# This is similar to how AIX traditionally builds it's shared libraries.
archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $compiler_flags $libobjs $deplibs ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname'
fi
fi
;;
amigaos*)
archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)'
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_minus_L_GCJ=yes
# see comment about different semantics on the GNU ld section
ld_shlibs_GCJ=no
;;
bsdi4*)
export_dynamic_flag_spec_GCJ=-rdynamic
;;
cygwin* | mingw* | pw32*)
# When not using gcc, we currently assume that we are using
# Microsoft Visual C++.
# hardcode_libdir_flag_spec is actually meaningless, as there is
# no search path for DLLs.
hardcode_libdir_flag_spec_GCJ=' '
allow_undefined_flag_GCJ=no
# Tell ltmain to make .lib files, not .a files.
libext=lib
# Tell ltmain to make .dll files, not .so files.
shrext=".dll"
# FIXME: Setting linknames here is a bad hack.
archive_cmds_GCJ='$CC -o $lib $compiler_flags $libobjs `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames='
# The linker will automatically build a .lib file if we build a DLL.
old_archive_From_new_cmds_GCJ='true'
# FIXME: Should let the user specify the lib program.
old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs'
fix_srcfile_path='`cygpath -w "$srcfile"`'
enable_shared_with_static_runtimes_GCJ=yes
;;
darwin* | rhapsody*)
if test "$GXX" = yes ; then
archive_cmds_need_lc_GCJ=no
case "$host_os" in
rhapsody* | darwin1.[012])
allow_undefined_flag_GCJ='-Wl,-undefined -Wl,suppress'
;;
*) # Darwin 1.3 on
if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then
allow_undefined_flag_GCJ='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
else
case ${MACOSX_DEPLOYMENT_TARGET} in
10.012)
allow_undefined_flag_GCJ='-Wl,-flat_namespace -Wl,-undefined -Wl,suppress'
;;
10.*)
allow_undefined_flag_GCJ='-Wl,-undefined -Wl,dynamic_lookup'
;;
esac
fi
;;
esac
lt_int_apple_cc_single_mod=no
output_verbose_link_cmd='echo'
if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then
lt_int_apple_cc_single_mod=yes
fi
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_cmds_GCJ='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring'
else
archive_cmds_GCJ='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring'
fi
module_cmds_GCJ='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs'
# Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's
if test "X$lt_int_apple_cc_single_mod" = Xyes ; then
archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $compiler_flags $libobjs $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
else
archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $compiler_flags $deplibs -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
fi
module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $compiler_flags $libobjs $deplibs~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}'
hardcode_direct_GCJ=no
hardcode_automatic_GCJ=yes
hardcode_shlibpath_var_GCJ=unsupported
whole_archive_flag_spec_GCJ='-all_load $convenience'
link_all_deplibs_GCJ=yes
else
ld_shlibs_GCJ=no
fi
;;
dgux*)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_shlibpath_var_GCJ=no
;;
freebsd1*)
ld_shlibs_GCJ=no
;;
# FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
# support. Future versions do this automatically, but an explicit c++rt0.o
# does not break anything, and helps significantly (at the cost of a little
# extra space).
freebsd2.2*)
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o'
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
# Unfortunately, older versions of FreeBSD 2 do not have this feature.
freebsd2*)
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_GCJ=yes
hardcode_minus_L_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
# FreeBSD 3 and greater uses gcc -shared to do shared libraries.
freebsd* | kfreebsd*-gnu)
archive_cmds_GCJ='$CC -shared -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
hpux9*)
if test "$GCC" = yes; then
archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $compiler_flags $libobjs $deplibs~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
else
archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib'
fi
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_GCJ=:
hardcode_direct_GCJ=yes
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_GCJ=yes
export_dynamic_flag_spec_GCJ='${wl}-E'
;;
hpux10* | hpux11*)
if test "$GCC" = yes -a "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
;;
*)
archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $compiler_flags $libobjs $deplibs'
;;
esac
else
case "$host_cpu" in
hppa*64*|ia64*)
archive_cmds_GCJ='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags'
;;
*)
archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags'
;;
esac
fi
if test "$with_gnu_ld" = no; then
case "$host_cpu" in
hppa*64*)
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_flag_spec_ld_GCJ='+b $libdir'
hardcode_libdir_separator_GCJ=:
hardcode_direct_GCJ=no
hardcode_shlibpath_var_GCJ=no
;;
ia64*)
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_direct_GCJ=no
hardcode_shlibpath_var_GCJ=no
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_GCJ=yes
;;
*)
hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir'
hardcode_libdir_separator_GCJ=:
hardcode_direct_GCJ=yes
export_dynamic_flag_spec_GCJ='${wl}-E'
# hardcode_minus_L: Not really in the search PATH,
# but as the default location of the library.
hardcode_minus_L_GCJ=yes
;;
esac
fi
;;
irix5* | irix6* | nonstopux*)
if test "$GCC" = yes; then
archive_cmds_GCJ='$CC -shared $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir'
fi
hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_GCJ=:
link_all_deplibs_GCJ=yes
;;
netbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out
else
archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF
fi
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
newsos6)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_GCJ=yes
hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_GCJ=:
hardcode_shlibpath_var_GCJ=no
;;
openbsd*)
hardcode_direct_GCJ=yes
hardcode_shlibpath_var_GCJ=no
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
export_dynamic_flag_spec_GCJ='${wl}-E'
else
case $host_os in
openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*)
archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_GCJ='-R$libdir'
;;
*)
archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $compiler_flags $libobjs $deplibs'
hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir'
;;
esac
fi
;;
os2*)
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_minus_L_GCJ=yes
allow_undefined_flag_GCJ=unsupported
archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $compiler_flags $libobjs $deplibs$output_objdir/$libname.def'
old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def'
;;
osf3*)
if test "$GCC" = yes; then
allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
else
allow_undefined_flag_GCJ=' -expect_unresolved \*'
archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
fi
hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
hardcode_libdir_separator_GCJ=:
;;
osf4* | osf5*) # as osf3* with the addition of -msym flag
if test "$GCC" = yes; then
allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*'
archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $compiler_flags $libobjs $deplibs ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib'
hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir'
else
allow_undefined_flag_GCJ=' -expect_unresolved \*'
archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib'
archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~
$LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp'
# Both c and cxx compiler support -rpath directly
hardcode_libdir_flag_spec_GCJ='-rpath $libdir'
fi
hardcode_libdir_separator_GCJ=:
;;
sco3.2v5*)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_GCJ=no
export_dynamic_flag_spec_GCJ='${wl}-Bexport'
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
;;
solaris*)
no_undefined_flag_GCJ=' -z text'
if test "$GCC" = yes; then
archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs~$rm $lib.exp'
else
archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
fi
hardcode_libdir_flag_spec_GCJ='-R$libdir'
hardcode_shlibpath_var_GCJ=no
case $host_os in
solaris2.[0-5] | solaris2.[0-5].*) ;;
*) # Supported since Solaris 2.6 (maybe 2.5.1?)
whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;;
esac
link_all_deplibs_GCJ=yes
;;
sunos4*)
if test "x$host_vendor" = xsequent; then
# Use $CC to link under sequent, because it throws in some extra .o
# files that make .init and .fini sections work.
archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags'
fi
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_direct_GCJ=yes
hardcode_minus_L_GCJ=yes
hardcode_shlibpath_var_GCJ=no
;;
sysv4)
case $host_vendor in
sni)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_GCJ=yes # is this really true???
;;
siemens)
## LD is ld it makes a PLAMLIB
## CC just makes a GrossModule.
archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
reload_cmds_GCJ='$CC -r -o $output$reload_objs'
hardcode_direct_GCJ=no
;;
motorola)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie
;;
esac
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_GCJ=no
;;
sysv4.3*)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_GCJ=no
export_dynamic_flag_spec_GCJ='-Bexport'
;;
sysv4*MP*)
if test -d /usr/nec; then
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_shlibpath_var_GCJ=no
runpath_var=LD_RUN_PATH
hardcode_runpath_var=yes
ld_shlibs_GCJ=yes
fi
;;
sysv4.2uw2*)
archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags'
hardcode_direct_GCJ=yes
hardcode_minus_L_GCJ=no
hardcode_shlibpath_var_GCJ=no
hardcode_runpath_var=yes
runpath_var=LD_RUN_PATH
;;
sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*)
no_undefined_flag_GCJ='${wl}-z ${wl}text'
if test "$GCC" = yes; then
archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
else
archive_cmds_GCJ='$CC -G ${wl}-h ${wl}$soname -o $lib $compiler_flags $libobjs $deplibs'
fi
runpath_var='LD_RUN_PATH'
hardcode_shlibpath_var_GCJ=no
;;
sysv5*)
no_undefined_flag_GCJ=' -z text'
# $CC -shared without GNU ld will not create a library from C++
# object files and a static libstdc++, better avoid it by now
archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags'
archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~
$LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp'
hardcode_libdir_flag_spec_GCJ=
hardcode_shlibpath_var_GCJ=no
runpath_var='LD_RUN_PATH'
;;
uts4*)
archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags'
hardcode_libdir_flag_spec_GCJ='-L$libdir'
hardcode_shlibpath_var_GCJ=no
;;
*)
ld_shlibs_GCJ=no
;;
esac
fi
{ echo "$as_me:20241: result: $ld_shlibs_GCJ" >&5
echo "${ECHO_T}$ld_shlibs_GCJ" >&6; }
test "$ld_shlibs_GCJ" = no && can_build_shared=no
variables_saved_for_relink="PATH $shlibpath_var $runpath_var"
if test "$GCC" = yes; then
variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH"
fi
#
# Do we need to explicitly link libc?
#
case "x$archive_cmds_need_lc_GCJ" in
x|xyes)
# Assume -lc should be added
archive_cmds_need_lc_GCJ=yes
if test "$enable_shared" = yes && test "$GCC" = yes; then
case $archive_cmds_GCJ in
*'~'*)
# FIXME: we may have to deal with multi-command sequences.
;;
'$CC '*)
# Test whether the compiler implicitly links with -lc since on some
# systems, -lgcc has to come before -lc. If gcc already passes -lc
# to ld, don't add -lc before -lgcc.
{ echo "$as_me:20267: checking whether -lc should be explicitly linked in" >&5
echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; }
$rm conftest*
printf "$lt_simple_compile_test_code" > conftest.$ac_ext
if { (eval echo "$as_me:20272: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:20275: \$? = $ac_status" >&5
(exit $ac_status); } 2>conftest.err; then
soname=conftest
lib=conftest
libobjs=conftest.$ac_objext
deplibs=
wl=$lt_prog_compiler_wl_GCJ
compiler_flags=-v
linker_flags=-v
verstring=
output_objdir=.
libname=conftest
lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ
allow_undefined_flag_GCJ=
if { (eval echo "$as_me:20289: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5
(eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5
ac_status=$?
echo "$as_me:20292: \$? = $ac_status" >&5
(exit $ac_status); }
then
archive_cmds_need_lc_GCJ=no
else
archive_cmds_need_lc_GCJ=yes
fi
allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag
else
cat conftest.err 1>&5
fi
$rm conftest*
{ echo "$as_me:20304: result: $archive_cmds_need_lc_GCJ" >&5
echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; }
;;
esac
fi
;;
esac
{ echo "$as_me:20312: checking dynamic linker characteristics" >&5
echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; }
library_names_spec=
libname_spec='lib$name'
soname_spec=
shrext=".so"
postinstall_cmds=
postuninstall_cmds=
finish_cmds=
finish_eval=
shlibpath_var=
shlibpath_overrides_runpath=unknown
version_type=none
dynamic_linker="$host_os ld.so"
sys_lib_dlsearch_path_spec="/lib /usr/lib"
sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib"
need_lib_prefix=unknown
hardcode_into_libs=no
# when you set need_version to no, make sure it does not cause -set_version
# flags to be left without arguments
need_version=unknown
case $host_os in
aix3*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a'
shlibpath_var=LIBPATH
# AIX 3 has no versioning support, so we append a major version to the name.
soname_spec='${libname}${release}${shared_ext}$major'
;;
aix4* | aix5*)
version_type=linux
need_lib_prefix=no
need_version=no
hardcode_into_libs=yes
if test "$host_cpu" = ia64; then
# AIX 5 supports IA64
library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
else
# With GCC up to 2.95.x, collect2 would create an import file
# for dependence libraries. The import file would start with
# the line `#! .'. This would cause the generated library to
# depend on `.', always an invalid library. This was fixed in
# development snapshots of GCC prior to 3.0.
case $host_os in
aix4 | aix4.[01] | aix4.[01].*)
if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)'
echo ' yes '
echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then
:
else
can_build_shared=no
fi
;;
esac
# AIX (on Power*) has no versioning support, so currently we can not hardcode correct
# soname into executable. Probably we can add versioning support to
# collect2, so additional links can be useful in future.
if test "$aix_use_runtimelinking" = yes; then
# If using run time linking (on AIX 4.2 or later) use lib<name>.so
# instead of lib<name>.a to let people know that these are not
# typical AIX shared libraries.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
else
# We preserve .a as extension for shared libraries through AIX4.2
# and later when we are not doing run time linking.
library_names_spec='${libname}${release}.a $libname.a'
soname_spec='${libname}${release}${shared_ext}$major'
fi
shlibpath_var=LIBPATH
fi
;;
amigaos*)
library_names_spec='$libname.ixlibrary $libname.a'
# Create ${libname}_ixlibrary.a entries in /sys/libs.
finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done'
;;
beos*)
library_names_spec='${libname}${shared_ext}'
dynamic_linker="$host_os ld.so"
shlibpath_var=LIBRARY_PATH
;;
bsdi4*)
version_type=linux
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib"
sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib"
# the default ld.so.conf also contains /usr/contrib/lib and
# /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow
# libtool to hard-code these into programs
;;
cygwin* | mingw* | pw32*)
version_type=windows
shrext=".dll"
need_version=no
need_lib_prefix=no
case $GCC,$host_os in
yes,cygwin* | yes,mingw* | yes,pw32*)
library_names_spec='$libname.dll.a'
# DLL is installed to $(libdir)/../bin by postinstall_cmds
postinstall_cmds='base_file=`basename \${file}`~
dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~
dldir=$destdir/`dirname \$dlpath`~
test -d \$dldir || mkdir -p \$dldir~
$install_prog $dir/$dlname \$dldir/$dlname'
postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~
dlpath=$dir/\$dldll~
$rm \$dlpath'
shlibpath_overrides_runpath=yes
case $host_os in
cygwin*)
# Cygwin DLLs use 'cyg' prefix rather than 'lib'
soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib"
;;
mingw*)
# MinGW DLLs use traditional 'lib' prefix
soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}'
sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"`
if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then
# It is most probably a Windows format PATH printed by
# mingw gcc, but we are running on Cygwin. Gcc prints its search
# path with ; separators, and with drive letters. We can handle the
# drive letters (cygwin fileutils understands them), so leave them,
# especially as we might pass files found there to a mingw objdump,
# which wouldn't understand a cygwinified path. Ahh.
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'`
else
sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"`
fi
;;
pw32*)
# pw32 DLLs use 'pw' prefix rather than 'lib'
library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/./-/g'`${versuffix}${shared_ext}'
;;
esac
;;
*)
library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib'
;;
esac
dynamic_linker='Win32 ld.exe'
# FIXME: first we should search . and the directory the executable is in
shlibpath_var=PATH
;;
darwin* | rhapsody*)
dynamic_linker="$host_os dyld"
version_type=darwin
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext'
soname_spec='${libname}${release}${major}$shared_ext'
shlibpath_overrides_runpath=yes
shlibpath_var=DYLD_LIBRARY_PATH
shrext='$(test .$module = .yes && echo .so || echo .dylib)'
# Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same.
if test "$GCC" = yes; then
sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"`
else
sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib'
fi
sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib'
;;
dgux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
freebsd1*)
dynamic_linker=no
;;
kfreebsd*-gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
dynamic_linker='GNU ld.so'
;;
freebsd*)
objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout`
version_type=freebsd-$objformat
case $version_type in
freebsd-elf*)
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}'
need_version=no
need_lib_prefix=no
;;
freebsd-*)
library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix'
need_version=yes
;;
esac
shlibpath_var=LD_LIBRARY_PATH
case $host_os in
freebsd2*)
shlibpath_overrides_runpath=yes
;;
freebsd3.01* | freebsdelf3.01*)
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
*) # from 3.2 on
shlibpath_overrides_runpath=no
hardcode_into_libs=yes
;;
esac
;;
gnu*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
hardcode_into_libs=yes
;;
hpux9* | hpux10* | hpux11*)
# Give a soname corresponding to the major version so that dld.sl refuses to
# link against other versions.
version_type=sunos
need_lib_prefix=no
need_version=no
case "$host_cpu" in
ia64*)
shrext='.so'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.so"
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
if test "X$HPUX_IA64_MODE" = X32; then
sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib"
else
sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64"
fi
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
hppa*64*)
shrext='.sl'
hardcode_into_libs=yes
dynamic_linker="$host_os dld.sl"
shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH
shlibpath_overrides_runpath=yes # Unless +noenvvar is specified.
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64"
sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec
;;
*)
shrext='.sl'
dynamic_linker="$host_os dld.sl"
shlibpath_var=SHLIB_PATH
shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
;;
esac
# HP-UX runs *really* slowly unless shared libraries are mode 555.
postinstall_cmds='chmod 555 $lib'
;;
irix5* | irix6* | nonstopux*)
case $host_os in
nonstopux*) version_type=nonstopux ;;
*)
if test "$lt_cv_prog_gnu_ld" = yes; then
version_type=linux
else
version_type=irix
fi ;;
esac
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}'
case $host_os in
irix5* | nonstopux*)
libsuff= shlibsuff=
;;
*)
case $LD in # libtool.m4 will add one of these switches to LD
*-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ")
libsuff= shlibsuff= libmagic=32-bit;;
*-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ")
libsuff=32 shlibsuff=N32 libmagic=N32;;
*-64|*"-64 "|*-melf64bmip|*"-melf64bmip ")
libsuff=64 shlibsuff=64 libmagic=64-bit;;
*) libsuff= shlibsuff= libmagic=never-match;;
esac
;;
esac
shlibpath_var=LD_LIBRARY${shlibsuff}_PATH
shlibpath_overrides_runpath=no
sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}"
sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}"
hardcode_into_libs=yes
;;
# No shared lib support for Linux oldld, aout, or coff.
linux*oldld* | linux*aout* | linux*coff*)
dynamic_linker=no
;;
# This must be Linux ELF.
linux*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir'
libsuff=
if test "x$LINUX_64_MODE" = x64; then
# Some platforms are per default 64-bit, so there's no /lib64
if test -d /lib64 -a ! -h /lib64; then
libsuff=64
fi
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=no
sys_lib_dlsearch_path_spec="/lib${libsuff} /usr/lib${libsuff}"
sys_lib_search_path_spec="/lib${libsuff} /usr/lib${libsuff} /usr/local/lib${libsuff}"
# This implies no fast_install, which is unacceptable.
# Some rework will be needed to allow for fast_install
# before this can be enabled.
hardcode_into_libs=yes
# We used to test for /lib/ld.so.1 and disable shared libraries on
# powerpc, because MkLinux only supported shared libraries with the
# GNU dynamic linker. Since this was broken with cross compilers,
# most powerpc-linux boxes support dynamic linking these days and
# people can always --disable-shared, the test was removed, and we
# assume the GNU/Linux dynamic linker is in use.
dynamic_linker='GNU/Linux ld.so'
;;
netbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
dynamic_linker='NetBSD (a.out) ld.so'
else
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} ${libname}${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
dynamic_linker='NetBSD ld.elf_so'
fi
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
;;
newsos6)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
nto-qnx*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
;;
openbsd*)
version_type=sunos
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir'
shlibpath_var=LD_LIBRARY_PATH
if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then
case $host_os in
openbsd2.[89] | openbsd2.[89].*)
shlibpath_overrides_runpath=no
;;
*)
shlibpath_overrides_runpath=yes
;;
esac
else
shlibpath_overrides_runpath=yes
fi
;;
os2*)
libname_spec='$name'
shrext=".dll"
need_lib_prefix=no
library_names_spec='$libname${shared_ext} $libname.a'
dynamic_linker='OS/2 ld.exe'
shlibpath_var=LIBPATH
;;
osf3* | osf4* | osf5*)
version_type=osf
need_lib_prefix=no
need_version=no
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib"
sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec"
;;
sco3.2v5*)
version_type=osf
soname_spec='${libname}${release}${shared_ext}$major'
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
shlibpath_var=LD_LIBRARY_PATH
;;
solaris*)
version_type=linux
need_lib_prefix=no
need_version=no
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
hardcode_into_libs=yes
# ldd complains unless libraries are executable
postinstall_cmds='chmod +x $lib'
;;
sunos4*)
version_type=sunos
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix'
finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir'
shlibpath_var=LD_LIBRARY_PATH
shlibpath_overrides_runpath=yes
if test "$with_gnu_ld" = yes; then
need_lib_prefix=no
fi
need_version=yes
;;
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
case $host_vendor in
sni)
shlibpath_overrides_runpath=no
need_lib_prefix=no
export_dynamic_flag_spec='${wl}-Blargedynsym'
runpath_var=LD_RUN_PATH
;;
siemens)
need_lib_prefix=no
;;
motorola)
need_lib_prefix=no
need_version=no
shlibpath_overrides_runpath=no
sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib'
;;
esac
;;
sysv4*MP*)
if test -d /usr/nec ;then
version_type=linux
library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}'
soname_spec='$libname${shared_ext}.$major'
shlibpath_var=LD_LIBRARY_PATH
fi
;;
uts4*)
version_type=linux
library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}'
soname_spec='${libname}${release}${shared_ext}$major'
shlibpath_var=LD_LIBRARY_PATH
;;
*)
dynamic_linker=no
;;
esac
{ echo "$as_me:20830: result: $dynamic_linker" >&5
echo "${ECHO_T}$dynamic_linker" >&6; }
test "$dynamic_linker" = no && can_build_shared=no
{ echo "$as_me:20834: checking how to hardcode library paths into programs" >&5
echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; }
hardcode_action_GCJ=
if test -n "$hardcode_libdir_flag_spec_GCJ" || \
test -n "$runpath_var GCJ" || \
test "X$hardcode_automatic_GCJ"="Xyes" ; then
# We can hardcode non-existant directories.
if test "$hardcode_direct_GCJ" != no &&
# If the only mechanism to avoid hardcoding is shlibpath_var, we
# have to relink, otherwise we might link with an installed library
# when we should be linking with a yet-to-be-installed one
## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no &&
test "$hardcode_minus_L_GCJ" != no; then
# Linking always hardcodes the temporary library directory.
hardcode_action_GCJ=relink
else
# We can link without hardcoding, and we can hardcode nonexisting dirs.
hardcode_action_GCJ=immediate
fi
else
# We cannot hardcode anything, or else we can only hardcode existing
# directories.
hardcode_action_GCJ=unsupported
fi
{ echo "$as_me:20859: result: $hardcode_action_GCJ" >&5
echo "${ECHO_T}$hardcode_action_GCJ" >&6; }
if test "$hardcode_action_GCJ" = relink; then
# Fast installation is not supported
enable_fast_install=no
elif test "$shlibpath_overrides_runpath" = yes ||
test "$enable_shared" = no; then
# Fast installation is not necessary
enable_fast_install=needless
fi
striplib=
old_striplib=
{ echo "$as_me:20873: checking whether stripping libraries is possible" >&5
echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; }
if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then
test -z "$old_striplib" && old_striplib="$STRIP --strip-debug"
test -z "$striplib" && striplib="$STRIP --strip-unneeded"
{ echo "$as_me:20878: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
# FIXME - insert some real tests, host_os isn't really good enough
case $host_os in
darwin*)
if test -n "$STRIP" ; then
striplib="$STRIP -x"
{ echo "$as_me:20886: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ echo "$as_me:20889: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
;;
*)
{ echo "$as_me:20894: result: no" >&5
echo "${ECHO_T}no" >&6; }
;;
esac
fi
if test "x$enable_dlopen" != xyes; then
enable_dlopen=unknown
enable_dlopen_self=unknown
enable_dlopen_self_static=unknown
else
lt_cv_dlopen=no
lt_cv_dlopen_libs=
case $host_os in
beos*)
lt_cv_dlopen="load_add_on"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
;;
mingw* | pw32*)
lt_cv_dlopen="LoadLibrary"
lt_cv_dlopen_libs=
;;
cygwin*)
lt_cv_dlopen="dlopen"
lt_cv_dlopen_libs=
;;
darwin*)
# if libdl is installed we need to link against it
{ echo "$as_me:20927: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:20962: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:20968: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:20986: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
lt_cv_dlopen="dyld"
lt_cv_dlopen_libs=
lt_cv_dlopen_self=yes
fi
;;
*)
{ echo "$as_me:21001: checking for shl_load" >&5
echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; }
if test "${ac_cv_func_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define shl_load innocuous_shl_load
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shl_load (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef shl_load
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_shl_load || defined __stub___shl_load
choke me
#endif
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21057: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21063: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:21080: result: $ac_cv_func_shl_load" >&5
echo "${ECHO_T}$ac_cv_func_shl_load" >&6; }
if test $ac_cv_func_shl_load = yes; then
lt_cv_dlopen="shl_load"
else
{ echo "$as_me:21085: checking for shl_load in -ldld" >&5
echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_shl_load+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_load ();
int
main ()
{
return shl_load ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21120: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21126: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_shl_load=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_shl_load=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:21144: result: $ac_cv_lib_dld_shl_load" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; }
if test $ac_cv_lib_dld_shl_load = yes; then
lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"
else
{ echo "$as_me:21149: checking for dlopen" >&5
echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; }
if test "${ac_cv_func_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define dlopen innocuous_dlopen
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char dlopen (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef dlopen
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_dlopen || defined __stub___dlopen
choke me
#endif
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21205: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21211: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:21228: result: $ac_cv_func_dlopen" >&5
echo "${ECHO_T}$ac_cv_func_dlopen" >&6; }
if test $ac_cv_func_dlopen = yes; then
lt_cv_dlopen="dlopen"
else
{ echo "$as_me:21233: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21268: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21274: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:21292: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"
else
{ echo "$as_me:21297: checking for dlopen in -lsvld" >&5
echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; }
if test "${ac_cv_lib_svld_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsvld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21332: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21338: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_svld_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_svld_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:21356: result: $ac_cv_lib_svld_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; }
if test $ac_cv_lib_svld_dlopen = yes; then
lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"
else
{ echo "$as_me:21361: checking for dld_link in -ldld" >&5
echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_dld_link+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dld_link ();
int
main ()
{
return dld_link ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:21396: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:21402: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_dld_link=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_dld_link=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:21420: result: $ac_cv_lib_dld_dld_link" >&5
echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; }
if test $ac_cv_lib_dld_dld_link = yes; then
lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"
fi
fi
fi
fi
fi
fi
;;
esac
if test "x$lt_cv_dlopen" != xno; then
enable_dlopen=yes
else
enable_dlopen=no
fi
case $lt_cv_dlopen in
dlopen)
save_CPPFLAGS="$CPPFLAGS"
test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H"
save_LDFLAGS="$LDFLAGS"
eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\"
save_LIBS="$LIBS"
LIBS="$lt_cv_dlopen_libs $LIBS"
{ echo "$as_me:21461: checking whether a program can dlopen itself" >&5
echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 21472 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:21533: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:21536: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:21554: result: $lt_cv_dlopen_self" >&5
echo "${ECHO_T}$lt_cv_dlopen_self" >&6; }
if test "x$lt_cv_dlopen_self" = xyes; then
LDFLAGS="$LDFLAGS $link_static_flag"
{ echo "$as_me:21559: checking whether a statically linked program can dlopen itself" >&5
echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; }
if test "${lt_cv_dlopen_self_static+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then :
lt_cv_dlopen_self_static=cross
else
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<EOF
#line 21570 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
#include <dlfcn.h>
#endif
#include <stdio.h>
#ifdef RTLD_GLOBAL
# define LT_DLGLOBAL RTLD_GLOBAL
#else
# ifdef DL_GLOBAL
# define LT_DLGLOBAL DL_GLOBAL
# else
# define LT_DLGLOBAL 0
# endif
#endif
/* We may have to define LT_DLLAZY_OR_NOW in the command line if we
find out it does not work in some platform. */
#ifndef LT_DLLAZY_OR_NOW
# ifdef RTLD_LAZY
# define LT_DLLAZY_OR_NOW RTLD_LAZY
# else
# ifdef DL_LAZY
# define LT_DLLAZY_OR_NOW DL_LAZY
# else
# ifdef RTLD_NOW
# define LT_DLLAZY_OR_NOW RTLD_NOW
# else
# ifdef DL_NOW
# define LT_DLLAZY_OR_NOW DL_NOW
# else
# define LT_DLLAZY_OR_NOW 0
# endif
# endif
# endif
# endif
#endif
#ifdef __cplusplus
extern "C" void exit (int);
#endif
void fnord() { int i=42;}
int main ()
{
void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW);
int status = $lt_dlunknown;
if (self)
{
if (dlsym (self,"fnord")) status = $lt_dlno_uscore;
else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore;
/* dlclose (self); */
}
exit (status);
}
EOF
if { (eval echo "$as_me:21631: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:21634: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then
(./conftest; exit; ) 2>/dev/null
lt_status=$?
case x$lt_status in
x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;;
x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;;
esac
else :
# compilation failed
lt_cv_dlopen_self_static=no
fi
fi
rm -fr conftest*
fi
{ echo "$as_me:21652: result: $lt_cv_dlopen_self_static" >&5
echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; }
fi
CPPFLAGS="$save_CPPFLAGS"
LDFLAGS="$save_LDFLAGS"
LIBS="$save_LIBS"
;;
esac
case $lt_cv_dlopen_self in
yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;;
*) enable_dlopen_self=unknown ;;
esac
case $lt_cv_dlopen_self_static in
yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;;
*) enable_dlopen_self_static=unknown ;;
esac
fi
# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
# See if we are running on zsh, and set the options which allow our commands through
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
old_postinstall_cmds old_postuninstall_cmds \
compiler_GCJ \
CC_GCJ \
LD_GCJ \
lt_prog_compiler_wl_GCJ \
lt_prog_compiler_pic_GCJ \
lt_prog_compiler_static_GCJ \
lt_prog_compiler_no_builtin_flag_GCJ \
export_dynamic_flag_spec_GCJ \
thread_safe_flag_spec_GCJ \
whole_archive_flag_spec_GCJ \
enable_shared_with_static_runtimes_GCJ \
old_archive_cmds_GCJ \
old_archive_from_new_cmds_GCJ \
predep_objects_GCJ \
postdep_objects_GCJ \
predeps_GCJ \
postdeps_GCJ \
compiler_lib_search_path_GCJ \
archive_cmds_GCJ \
archive_expsym_cmds_GCJ \
postinstall_cmds_GCJ \
postuninstall_cmds_GCJ \
old_archive_from_expsyms_cmds_GCJ \
allow_undefined_flag_GCJ \
no_undefined_flag_GCJ \
export_symbols_cmds_GCJ \
hardcode_libdir_flag_spec_GCJ \
hardcode_libdir_flag_spec_ld_GCJ \
hardcode_libdir_separator_GCJ \
hardcode_automatic_GCJ \
module_cmds_GCJ \
module_expsym_cmds_GCJ \
lt_cv_prog_compiler_c_o_GCJ \
exclude_expsyms_GCJ \
include_expsyms_GCJ; do
case $var in
old_archive_cmds_GCJ | \
old_archive_from_new_cmds_GCJ | \
archive_cmds_GCJ | \
archive_expsym_cmds_GCJ | \
module_cmds_GCJ | \
module_expsym_cmds_GCJ | \
old_archive_from_expsyms_cmds_GCJ | \
export_symbols_cmds_GCJ | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
postinstall_cmds | postuninstall_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
case $lt_echo in
*'\$0 --fallback-echo"')
lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
;;
esac
cfgfile="$ofile"
cat <<__EOF__ >> "$cfgfile"
# ### BEGIN LIBTOOL TAG CONFIG: $tagname
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_GCJ
# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# A C compiler.
LTCC=$lt_LTCC
# A language-specific compiler.
CC=$lt_compiler_GCJ
# Is the compiler the GNU C compiler?
with_gcc=$GCC_GCJ
# An ERE matcher.
EGREP=$lt_EGREP
# The linker used to build libraries.
LD=$lt_LD_GCJ
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_GCJ
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Shared library suffix (normally ".so").
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_GCJ
pic_mode=$pic_mode
# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_GCJ
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds_GCJ
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds_GCJ
archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds_GCJ
module_expsym_cmds=$lt_module_expsym_cmds_GCJ
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects_GCJ
# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects_GCJ
# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps_GCJ
# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps_GCJ
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_GCJ
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_GCJ
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_GCJ
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ
# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ
# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct_GCJ
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L_GCJ
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ
# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic_GCJ
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_GCJ
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path_GCJ"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_GCJ
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_GCJ
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_GCJ
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_GCJ
# ### END LIBTOOL TAG CONFIG: $tagname
__EOF__
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
else
tagname=""
fi
;;
RC)
# Source file extension for RC test sources.
ac_ext=rc
# Object file extension for compiled RC test sources.
objext=o
objext_RC=$objext
# Code to be used in simple compile tests
lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n'
# Code to be used in simple link tests
lt_simple_link_test_code="$lt_simple_compile_test_code"
# ltmain only uses $CC for tagged configurations so make sure $CC is set.
# If no C compiler was specified, use CC.
LTCC=${LTCC-"$CC"}
# Allow CC to be a program name with arguments.
compiler=$CC
# Allow CC to be a program name with arguments.
lt_save_CC="$CC"
CC=${RC-"windres"}
compiler=$CC
compiler_RC=$CC
lt_cv_prog_compiler_c_o_RC=yes
# The else clause should only fire when bootstrapping the
# libtool distribution, otherwise you forgot to ship ltmain.sh
# with your package, and you will get complaints that there are
# no rules to generate ltmain.sh.
if test -f "$ltmain"; then
# See if we are running on zsh, and set the options which allow our commands through
# without removal of \ escapes.
if test -n "${ZSH_VERSION+set}" ; then
setopt NO_GLOB_SUBST
fi
# Now quote all the things that may contain metacharacters while being
# careful not to overquote the AC_SUBSTed values. We take copies of the
# variables and quote the copies for generation of the libtool script.
for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM SED SHELL \
libname_spec library_names_spec soname_spec extract_expsyms_cmds \
old_striplib striplib file_magic_cmd finish_cmds finish_eval \
deplibs_check_method reload_flag reload_cmds need_locks \
lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \
lt_cv_sys_global_symbol_to_c_name_address \
sys_lib_search_path_spec sys_lib_dlsearch_path_spec \
old_postinstall_cmds old_postuninstall_cmds \
compiler_RC \
CC_RC \
LD_RC \
lt_prog_compiler_wl_RC \
lt_prog_compiler_pic_RC \
lt_prog_compiler_static_RC \
lt_prog_compiler_no_builtin_flag_RC \
export_dynamic_flag_spec_RC \
thread_safe_flag_spec_RC \
whole_archive_flag_spec_RC \
enable_shared_with_static_runtimes_RC \
old_archive_cmds_RC \
old_archive_from_new_cmds_RC \
predep_objects_RC \
postdep_objects_RC \
predeps_RC \
postdeps_RC \
compiler_lib_search_path_RC \
archive_cmds_RC \
archive_expsym_cmds_RC \
postinstall_cmds_RC \
postuninstall_cmds_RC \
old_archive_from_expsyms_cmds_RC \
allow_undefined_flag_RC \
no_undefined_flag_RC \
export_symbols_cmds_RC \
hardcode_libdir_flag_spec_RC \
hardcode_libdir_flag_spec_ld_RC \
hardcode_libdir_separator_RC \
hardcode_automatic_RC \
module_cmds_RC \
module_expsym_cmds_RC \
lt_cv_prog_compiler_c_o_RC \
exclude_expsyms_RC \
include_expsyms_RC; do
case $var in
old_archive_cmds_RC | \
old_archive_from_new_cmds_RC | \
archive_cmds_RC | \
archive_expsym_cmds_RC | \
module_cmds_RC | \
module_expsym_cmds_RC | \
old_archive_from_expsyms_cmds_RC | \
export_symbols_cmds_RC | \
extract_expsyms_cmds | reload_cmds | finish_cmds | \
postinstall_cmds | postuninstall_cmds | \
old_postinstall_cmds | old_postuninstall_cmds | \
sys_lib_search_path_spec | sys_lib_dlsearch_path_spec)
# Double-quote double-evaled strings.
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\""
;;
*)
eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\""
;;
esac
done
case $lt_echo in
*'\$0 --fallback-echo"')
lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'`
;;
esac
cfgfile="$ofile"
cat <<__EOF__ >> "$cfgfile"
# ### BEGIN LIBTOOL TAG CONFIG: $tagname
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL
# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared
# Whether or not to build static libraries.
build_old_libs=$enable_static
# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_RC
# Whether or not to disallow shared libs when runtime libs are static
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC
# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install
# The host system.
host_alias=$host_alias
host=$host
# An echo program that does not interpret backslashes.
echo=$lt_echo
# The archiver.
AR=$lt_AR
AR_FLAGS=$lt_AR_FLAGS
# A C compiler.
LTCC=$lt_LTCC
# A language-specific compiler.
CC=$lt_compiler_RC
# Is the compiler the GNU C compiler?
with_gcc=$GCC_RC
# An ERE matcher.
EGREP=$lt_EGREP
# The linker used to build libraries.
LD=$lt_LD_RC
# Whether we need hard or soft links.
LN_S=$lt_LN_S
# A BSD-compatible nm program.
NM=$lt_NM
# A symbol stripping program
STRIP=$STRIP
# Used to examine libraries when file_magic_cmd begins "file"
MAGIC_CMD=$MAGIC_CMD
# Used on cygwin: DLL creation program.
DLLTOOL="$DLLTOOL"
# Used on cygwin: object dumper.
OBJDUMP="$OBJDUMP"
# Used on cygwin: assembler.
AS="$AS"
# The name of the directory that contains temporary libtool files.
objdir=$objdir
# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds
# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_RC
# Object file suffix (normally "o").
objext="$ac_objext"
# Old archive suffix (normally "a").
libext="$libext"
# Shared library suffix (normally ".so").
shrext='$shrext'
# Executable file suffix (normally "").
exeext="$exeext"
# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_RC
pic_mode=$pic_mode
# What is the maximum length of a command?
max_cmd_len=$lt_cv_sys_max_cmd_len
# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC
# Must we lock files when doing compilation ?
need_locks=$lt_need_locks
# Do we need the lib prefix for modules?
need_lib_prefix=$need_lib_prefix
# Do we need a version for libraries?
need_version=$need_version
# Whether dlopen is supported.
dlopen_support=$enable_dlopen
# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self
# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static
# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_RC
# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC
# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC
# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC
# Compiler flag to generate thread-safe objects.
thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC
# Library versioning type.
version_type=$version_type
# Format of library name prefix.
libname_spec=$lt_libname_spec
# List of archive names. First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME.
library_names_spec=$lt_library_names_spec
# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec
# Commands used to build and install an old-style archive.
RANLIB=$lt_RANLIB
old_archive_cmds=$lt_old_archive_cmds_RC
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds
# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC
# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC
# Commands used to build and install a shared archive.
archive_cmds=$lt_archive_cmds_RC
archive_expsym_cmds=$lt_archive_expsym_cmds_RC
postinstall_cmds=$lt_postinstall_cmds
postuninstall_cmds=$lt_postuninstall_cmds
# Commands used to build a loadable module (assumed same as above if empty)
module_cmds=$lt_module_cmds_RC
module_expsym_cmds=$lt_module_expsym_cmds_RC
# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib
# Dependencies to place before the objects being linked to create a
# shared library.
predep_objects=$lt_predep_objects_RC
# Dependencies to place after the objects being linked to create a
# shared library.
postdep_objects=$lt_postdep_objects_RC
# Dependencies to place before the objects being linked to create a
# shared library.
predeps=$lt_predeps_RC
# Dependencies to place after the objects being linked to create a
# shared library.
postdeps=$lt_postdeps_RC
# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_RC
# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method
# Command to use when deplibs_check_method == file_magic.
file_magic_cmd=$lt_file_magic_cmd
# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_RC
# Flag that forces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_RC
# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds
# Same as above, but a single script fragment to be evaled but not shown.
finish_eval=$lt_finish_eval
# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe
# Transform the output of nm in a proper C declaration
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl
# Transform the output of nm in a C name address pair
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address
# This is the shared library runtime path variable.
runpath_var=$runpath_var
# This is the shared library path variable.
shlibpath_var=$shlibpath_var
# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath
# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_RC
# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs
# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist.
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC
# If ld is used when linking, flag to hardcode \$libdir into
# a binary during linking. This must work even if \$libdir does
# not exist.
hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC
# Whether we need a single -rpath flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC
# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the
# resulting binary.
hardcode_direct=$hardcode_direct_RC
# Set to yes if using the -LDIR flag during linking hardcodes DIR into the
# resulting binary.
hardcode_minus_L=$hardcode_minus_L_RC
# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into
# the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_RC
# Set to yes if building a shared library automatically hardcodes DIR into the library
# and all subsequent libraries and executables linked against it.
hardcode_automatic=$hardcode_automatic_RC
# Variables whose values should be saved in libtool wrapper scripts and
# restored at relink time.
variables_saved_for_relink="$variables_saved_for_relink"
# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_RC
# Compile-time system search path for libraries
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec
# Run-time system search path for libraries
sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec
# Fix the shell variable \$srcfile for the compiler.
fix_srcfile_path="$fix_srcfile_path_RC"
# Set to yes if exported symbols are required.
always_export_symbols=$always_export_symbols_RC
# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_RC
# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds
# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_RC
# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_RC
# ### END LIBTOOL TAG CONFIG: $tagname
__EOF__
else
# If there is no Makefile yet, we rely on a make rule to execute
# `config.status --recheck' to rerun these tests and create the
# libtool script then.
test -f Makefile && make "$ltmain"
fi
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
CC="$lt_save_CC"
;;
*)
{ { echo "$as_me:22520: error: Unsupported tag name: $tagname" >&5
echo "$as_me: error: Unsupported tag name: $tagname" >&2;}
{ (exit 1); exit 1; }; }
;;
esac
# Append the new tag name to the list of available tags.
if test -n "$tagname" ; then
available_tags="$available_tags $tagname"
fi
fi
done
IFS="$lt_save_ifs"
# Now substitute the updated list of available tags.
if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then
mv "${ofile}T" "$ofile"
chmod +x "$ofile"
else
rm -f "${ofile}T"
{ { echo "$as_me:22540: error: unable to update list of available tagged configurations." >&5
echo "$as_me: error: unable to update list of available tagged configurations." >&2;}
{ (exit 1); exit 1; }; }
fi
fi
# This can be used to rebuild libtool when needed
LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool --silent'
# Prevent multiple expansion
LIBTOOL_SHELL="/bin/sh ./libtool"
# LIBTOOL="$LIBTOOL --silent"
KDE_PLUGIN="-avoid-version -module -no-undefined \$(KDE_NO_UNDEFINED) \$(KDE_RPATH) \$(KDE_MT_LDFLAGS)"
# This hack ensures that libtool creates shared libs for kunittest plugins. By default check_LTLIBRARIES makes static libs.
KDE_CHECK_PLUGIN="\$(KDE_PLUGIN) -rpath \$(libdir)"
# we patch configure quite some so we better keep that consistent for incremental runs
AUTOCONF='$(SHELL) $(top_srcdir)/admin/cvs.sh configure || touch configure'
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
{ echo "$as_me:22607: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_MSGFMT+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case "$MSGFMT" in
/*)
ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -n "`$ac_dir/$ac_word --version 2>&1 | grep 'GNU gettext'`"; then
ac_cv_path_MSGFMT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt"
;;
esac
fi
MSGFMT="$ac_cv_path_MSGFMT"
if test -n "$MSGFMT"; then
{ echo "$as_me:22634: result: $MSGFMT" >&5
echo "${ECHO_T}$MSGFMT" >&6; }
else
{ echo "$as_me:22637: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
{ echo "$as_me:22643: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_GMSGFMT+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case $GMSGFMT in
[\\/]* | ?:[\\/]*)
ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path.
;;
*)
as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
for ac_exec_ext in '' $ac_executable_extensions; do
if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then
ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext"
echo "$as_me:22661: found $as_dir/$ac_word$ac_exec_ext" >&5
break 2
fi
done
done
IFS=$as_save_IFS
test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT"
;;
esac
fi
GMSGFMT=$ac_cv_path_GMSGFMT
if test -n "$GMSGFMT"; then
{ echo "$as_me:22674: result: $GMSGFMT" >&5
echo "${ECHO_T}$GMSGFMT" >&6; }
else
{ echo "$as_me:22677: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test -z "`$GMSGFMT --version 2>&1 | grep 'GNU gettext'`"; then
{ echo "$as_me:22684: result: found msgfmt program is not GNU msgfmt; ignore it" >&5
echo "${ECHO_T}found msgfmt program is not GNU msgfmt; ignore it" >&6; }
GMSGFMT=":"
fi
MSGFMT=$GMSGFMT
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
{ echo "$as_me:22694: checking for $ac_word" >&5
echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; }
if test "${ac_cv_path_XGETTEXT+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
case "$XGETTEXT" in
/*)
ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path.
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then
ac_cv_path_XGETTEXT="$ac_dir/$ac_word"
break
fi
fi
done
IFS="$ac_save_ifs"
test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":"
;;
esac
fi
XGETTEXT="$ac_cv_path_XGETTEXT"
if test -n "$XGETTEXT"; then
{ echo "$as_me:22721: result: $XGETTEXT" >&5
echo "${ECHO_T}$XGETTEXT" >&6; }
else
{ echo "$as_me:22724: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
if test "$XGETTEXT" != ":"; then
if $XGETTEXT --omit-header /dev/null 2> /dev/null; then
: ;
else
{ echo "$as_me:22733: result: found xgettext programs is not GNU xgettext; ignore it" >&5
echo "${ECHO_T}found xgettext programs is not GNU xgettext; ignore it" >&6; }
XGETTEXT=":"
fi
fi
if test -z "3.2.0"; then
# Current default Qt version: 3.3
kde_qtver=3
kde_qtsubver=3
else
kde_qtsubver=`echo "3.2.0" | sed -e 's#[0-9][0-9]*\.\([0-9][0-9]*\).*#\1#'`
# following is the check if subversion isnt found in passed argument
if test "$kde_qtsubver" = "3.2.0"; then
kde_qtsubver=1
fi
kde_qtver=`echo "3.2.0" | sed -e 's#^\([0-9][0-9]*\)\..*#\1#'`
if test "$kde_qtver" = "1"; then
kde_qtsubver=42
fi
fi
if test -z ""; then
if test "$kde_qtver" = "2"; then
if test $kde_qtsubver -gt 0; then
kde_qt_minversion=">= Qt 2.2.2"
else
kde_qt_minversion=">= Qt 2.0.2"
fi
fi
if test "$kde_qtver" = "3"; then
if test $kde_qtsubver -gt 0; then
if test $kde_qtsubver -gt 1; then
if test $kde_qtsubver -gt 2; then
kde_qt_minversion=">= Qt 3.3 and < 4.0"
else
kde_qt_minversion=">= Qt 3.2 and < 4.0"
fi
else
kde_qt_minversion=">= Qt 3.1 (20021021) and < 4.0"
fi
else
kde_qt_minversion=">= Qt 3.0 and < 4.0"
fi
fi
if test "$kde_qtver" = "1"; then
kde_qt_minversion=">= 1.42 and < 2.0"
fi
else
kde_qt_minversion=""
fi
if test -z ""; then
if test $kde_qtver = 3; then
if test $kde_qtsubver -gt 0; then
kde_qt_verstring="QT_VERSION >= 0x03@VER@00 && QT_VERSION < 0x040000"
qtsubver=`echo "00$kde_qtsubver" | sed -e 's,.*\(..\)$,\1,'`
kde_qt_verstring=`echo $kde_qt_verstring | sed -e "s,@VER@,$qtsubver,"`
else
kde_qt_verstring="QT_VERSION >= 300 && QT_VERSION < 0x040000"
fi
fi
if test $kde_qtver = 2; then
if test $kde_qtsubver -gt 0; then
kde_qt_verstring="QT_VERSION >= 222"
else
kde_qt_verstring="QT_VERSION >= 200"
fi
fi
if test $kde_qtver = 1; then
kde_qt_verstring="QT_VERSION >= 142 && QT_VERSION < 200"
fi
else
kde_qt_verstring=""
fi
if test $kde_qtver = 4; then
kde_qt_dirs="$QTDIR /usr/lib/qt4 /usr/lib/qt /usr/share/qt4"
fi
if test $kde_qtver = 3; then
kde_qt_dirs="$QTDIR /usr/lib/qt3 /usr/lib/qt /usr/share/qt3"
fi
if test $kde_qtver = 2; then
kde_qt_dirs="$QTDIR /usr/lib/qt2 /usr/lib/qt"
fi
if test $kde_qtver = 1; then
kde_qt_dirs="$QTDIR /usr/lib/qt"
fi
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="`echo $CXXFLAGS | sed s/-fno-exceptions//`"
{ echo "$as_me:22840: checking if C++ programs can be compiled" >&5
echo $ECHO_N "checking if C++ programs can be compiled... $ECHO_C" >&6; }
if test "${kde_cv_stl_works+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string>
using namespace std;
int
main ()
{
string astring="Hallo Welt.";
astring.erase(0, 6); // now astring is "Welt"
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:22874: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:22880: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_stl_works=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_stl_works=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:22898: result: $kde_cv_stl_works" >&5
echo "${ECHO_T}$kde_cv_stl_works" >&6; }
if test "$kde_cv_stl_works" = "yes"; then
# back compatible
cat >>confdefs.h <<_ACEOF
#define HAVE_SGI_STL 1
_ACEOF
else
{ { echo "$as_me:22909: error: Your Installation isn't able to compile simple C++ programs.
Check config.log for details - if you're using a Linux distribution you might miss
a package named similar to libstdc++-dev." >&5
echo "$as_me: error: Your Installation isn't able to compile simple C++ programs.
Check config.log for details - if you're using a Linux distribution you might miss
a package named similar to libstdc++-dev." >&2;}
{ (exit 1); exit 1; }; }
fi
CXXFLAGS="$ac_save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
{ echo "$as_me:22928: checking for strlcat" >&5
echo $ECHO_N "checking for strlcat... $ECHO_C" >&6; }
if test "${kde_cv_func_strlcat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
if test "$GXX" = "yes"; then
CXXFLAGS="$CXXFLAGS -pedantic-errors"
fi
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
int
main ()
{
char buf[20];
buf[0]='\0';
strlcat(buf, "KDE function test", sizeof(buf));
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:22980: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:22986: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_func_strlcat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_func_strlcat=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
LIBS="$kde_safe_LIBS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:23012: result: $kde_cv_func_strlcat" >&5
echo "${ECHO_T}$kde_cv_func_strlcat" >&6; }
{ echo "$as_me:23015: checking if strlcat needs custom prototype" >&5
echo $ECHO_N "checking if strlcat needs custom prototype... $ECHO_C" >&6; }
if test "${kde_cv_proto_strlcat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$kde_cv_func_strlcat" = xyes; then
kde_cv_proto_strlcat=no
else
case "strlcat" in
setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
kde_cv_proto_strlcat="yes - in libkdefakes"
;;
*)
kde_cv_proto_strlcat=unknown
;;
esac
fi
if test "x$kde_cv_proto_strlcat" = xunknown; then
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
kde_safe_libs=$LIBS
LIBS="$LIBS $X_EXTRA_LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
extern "C" unsigned long strlcat(char*, const char*, unsigned long);
int
main ()
{
char buf[20];
buf[0]='\0';
strlcat(buf, "KDE function test", sizeof(buf));
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23080: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23086: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_func_strlcat=yes
kde_cv_proto_strlcat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_proto_strlcat="strlcat unavailable"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$kde_safe_libs
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
fi
{ echo "$as_me:23115: result: $kde_cv_proto_strlcat" >&5
echo "${ECHO_T}$kde_cv_proto_strlcat" >&6; }
if test "x$kde_cv_func_strlcat" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_STRLCAT 1
_ACEOF
fi
if test "x$kde_cv_proto_strlcat" = xno; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_STRLCAT_PROTO 1
_ACEOF
fi
{ echo "$as_me:23140: checking for strlcpy" >&5
echo $ECHO_N "checking for strlcpy... $ECHO_C" >&6; }
if test "${kde_cv_func_strlcpy+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
if test "$GXX" = "yes"; then
CXXFLAGS="$CXXFLAGS -pedantic-errors"
fi
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
int
main ()
{
char buf[20];
strlcpy(buf, "KDE function test", sizeof(buf));
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23191: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23197: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_func_strlcpy=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_func_strlcpy=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
LIBS="$kde_safe_LIBS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:23223: result: $kde_cv_func_strlcpy" >&5
echo "${ECHO_T}$kde_cv_func_strlcpy" >&6; }
{ echo "$as_me:23226: checking if strlcpy needs custom prototype" >&5
echo $ECHO_N "checking if strlcpy needs custom prototype... $ECHO_C" >&6; }
if test "${kde_cv_proto_strlcpy+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$kde_cv_func_strlcpy" = xyes; then
kde_cv_proto_strlcpy=no
else
case "strlcpy" in
setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
kde_cv_proto_strlcpy="yes - in libkdefakes"
;;
*)
kde_cv_proto_strlcpy=unknown
;;
esac
fi
if test "x$kde_cv_proto_strlcpy" = xunknown; then
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
kde_safe_libs=$LIBS
LIBS="$LIBS $X_EXTRA_LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <string.h>
extern "C" unsigned long strlcpy(char*, const char*, unsigned long);
int
main ()
{
char buf[20];
strlcpy(buf, "KDE function test", sizeof(buf));
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23290: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23296: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_func_strlcpy=yes
kde_cv_proto_strlcpy=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_proto_strlcpy="strlcpy unavailable"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$kde_safe_libs
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
fi
{ echo "$as_me:23325: result: $kde_cv_proto_strlcpy" >&5
echo "${ECHO_T}$kde_cv_proto_strlcpy" >&6; }
if test "x$kde_cv_func_strlcpy" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_STRLCPY 1
_ACEOF
fi
if test "x$kde_cv_proto_strlcpy" = xno; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_STRLCPY_PROTO 1
_ACEOF
fi
{ echo "$as_me:23349: checking for main in -lutil" >&5
echo $ECHO_N "checking for main in -lutil... $ECHO_C" >&6; }
if test "${ac_cv_lib_util_main+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lutil $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return main ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23378: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23384: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_util_main=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_util_main=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23402: result: $ac_cv_lib_util_main" >&5
echo "${ECHO_T}$ac_cv_lib_util_main" >&6; }
if test $ac_cv_lib_util_main = yes; then
LIBUTIL="-lutil"
fi
{ echo "$as_me:23408: checking for main in -lcompat" >&5
echo $ECHO_N "checking for main in -lcompat... $ECHO_C" >&6; }
if test "${ac_cv_lib_compat_main+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lcompat $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return main ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23437: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23443: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_compat_main=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_compat_main=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23461: result: $ac_cv_lib_compat_main" >&5
echo "${ECHO_T}$ac_cv_lib_compat_main" >&6; }
if test $ac_cv_lib_compat_main = yes; then
LIBCOMPAT="-lcompat"
fi
kde_have_crypt=
{ echo "$as_me:23468: checking for crypt in -lcrypt" >&5
echo $ECHO_N "checking for crypt in -lcrypt... $ECHO_C" >&6; }
if test "${ac_cv_lib_crypt_crypt+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lcrypt $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char crypt ();
int
main ()
{
return crypt ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23503: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23509: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_crypt_crypt=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_crypt_crypt=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23527: result: $ac_cv_lib_crypt_crypt" >&5
echo "${ECHO_T}$ac_cv_lib_crypt_crypt" >&6; }
if test $ac_cv_lib_crypt_crypt = yes; then
LIBCRYPT="-lcrypt"; kde_have_crypt=yes
else
{ echo "$as_me:23532: checking for crypt in -lc" >&5
echo $ECHO_N "checking for crypt in -lc... $ECHO_C" >&6; }
if test "${ac_cv_lib_c_crypt+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lc $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char crypt ();
int
main ()
{
return crypt ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23567: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23573: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_c_crypt=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_c_crypt=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23591: result: $ac_cv_lib_c_crypt" >&5
echo "${ECHO_T}$ac_cv_lib_c_crypt" >&6; }
if test $ac_cv_lib_c_crypt = yes; then
kde_have_crypt=yes
else
{ echo "$as_me:23597: WARNING: you have no crypt in either libcrypt or libc.
You should install libcrypt from another source or configure with PAM
support" >&5
echo "$as_me: WARNING: you have no crypt in either libcrypt or libc.
You should install libcrypt from another source or configure with PAM
support" >&2;}
kde_have_crypt=no
fi
fi
if test $kde_have_crypt = yes; then
cat >>confdefs.h <<_ACEOF
#define HAVE_CRYPT 1
_ACEOF
fi
{ echo "$as_me:23618: checking for socklen_t" >&5
echo $ECHO_N "checking for socklen_t... $ECHO_C" >&6; }
if test "${kde_cv_socklen_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
kde_cv_socklen_t=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/socket.h>
int
main ()
{
socklen_t len;
getpeername(0,0,&len);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23658: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23664: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_socklen_t=yes
kde_cv_socklen_t_equiv=socklen_t
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:23690: result: $kde_cv_socklen_t" >&5
echo "${ECHO_T}$kde_cv_socklen_t" >&6; }
if test $kde_cv_socklen_t = no; then
{ echo "$as_me:23693: checking for socklen_t equivalent for socket functions" >&5
echo $ECHO_N "checking for socklen_t equivalent for socket functions... $ECHO_C" >&6; }
if test "${kde_cv_socklen_t_equiv+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_socklen_t_equiv=int
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
for t in int size_t unsigned long "unsigned long"; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/socket.h>
int
main ()
{
$t len;
getpeername(0,0,&len);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23734: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23740: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_socklen_t_equiv="$t"
break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:23767: result: $kde_cv_socklen_t_equiv" >&5
echo "${ECHO_T}$kde_cv_socklen_t_equiv" >&6; }
fi
cat >>confdefs.h <<_ACEOF
#define kde_socklen_t $kde_cv_socklen_t_equiv
_ACEOF
cat >>confdefs.h <<_ACEOF
#define ksize_t $kde_cv_socklen_t_equiv
_ACEOF
{ echo "$as_me:23781: checking for dnet_ntoa in -ldnet" >&5
echo $ECHO_N "checking for dnet_ntoa in -ldnet... $ECHO_C" >&6; }
if test "${ac_cv_lib_dnet_dnet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dnet_ntoa ();
int
main ()
{
return dnet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23816: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23822: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dnet_dnet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dnet_dnet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23840: result: $ac_cv_lib_dnet_dnet_ntoa" >&5
echo "${ECHO_T}$ac_cv_lib_dnet_dnet_ntoa" >&6; }
if test $ac_cv_lib_dnet_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet"
fi
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
{ echo "$as_me:23847: checking for dnet_ntoa in -ldnet_stub" >&5
echo $ECHO_N "checking for dnet_ntoa in -ldnet_stub... $ECHO_C" >&6; }
if test "${ac_cv_lib_dnet_stub_dnet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldnet_stub $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dnet_ntoa ();
int
main ()
{
return dnet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23882: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23888: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dnet_stub_dnet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dnet_stub_dnet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:23906: result: $ac_cv_lib_dnet_stub_dnet_ntoa" >&5
echo "${ECHO_T}$ac_cv_lib_dnet_stub_dnet_ntoa" >&6; }
if test $ac_cv_lib_dnet_stub_dnet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -ldnet_stub"
fi
fi
{ echo "$as_me:23913: checking for inet_ntoa" >&5
echo $ECHO_N "checking for inet_ntoa... $ECHO_C" >&6; }
if test "${ac_cv_func_inet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define inet_ntoa to an innocuous variant, in case <limits.h> declares inet_ntoa.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define inet_ntoa innocuous_inet_ntoa
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char inet_ntoa (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef inet_ntoa
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char inet_ntoa ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_inet_ntoa || defined __stub___inet_ntoa
choke me
#endif
int
main ()
{
return inet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:23969: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:23975: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_inet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_inet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:23992: result: $ac_cv_func_inet_ntoa" >&5
echo "${ECHO_T}$ac_cv_func_inet_ntoa" >&6; }
if test $ac_cv_func_inet_ntoa = no; then
{ echo "$as_me:23996: checking for inet_ntoa in -lnsl" >&5
echo $ECHO_N "checking for inet_ntoa in -lnsl... $ECHO_C" >&6; }
if test "${ac_cv_lib_nsl_inet_ntoa+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lnsl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char inet_ntoa ();
int
main ()
{
return inet_ntoa ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24031: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24037: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_nsl_inet_ntoa=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_nsl_inet_ntoa=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:24055: result: $ac_cv_lib_nsl_inet_ntoa" >&5
echo "${ECHO_T}$ac_cv_lib_nsl_inet_ntoa" >&6; }
if test $ac_cv_lib_nsl_inet_ntoa = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lnsl"
fi
fi
{ echo "$as_me:24062: checking for connect" >&5
echo $ECHO_N "checking for connect... $ECHO_C" >&6; }
if test "${ac_cv_func_connect+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define connect to an innocuous variant, in case <limits.h> declares connect.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define connect innocuous_connect
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef connect
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char connect ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_connect || defined __stub___connect
choke me
#endif
int
main ()
{
return connect ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24118: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24124: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_connect=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_connect=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:24141: result: $ac_cv_func_connect" >&5
echo "${ECHO_T}$ac_cv_func_connect" >&6; }
if test $ac_cv_func_connect = no; then
{ echo "$as_me:24145: checking for connect in -lsocket" >&5
echo $ECHO_N "checking for connect in -lsocket... $ECHO_C" >&6; }
if test "${ac_cv_lib_socket_connect+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char connect ();
int
main ()
{
return connect ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24180: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24186: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_socket_connect=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_socket_connect=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:24204: result: $ac_cv_lib_socket_connect" >&5
echo "${ECHO_T}$ac_cv_lib_socket_connect" >&6; }
if test $ac_cv_lib_socket_connect = yes; then
X_EXTRA_LIBS="-lsocket $X_EXTRA_LIBS"
fi
fi
{ echo "$as_me:24212: checking for remove" >&5
echo $ECHO_N "checking for remove... $ECHO_C" >&6; }
if test "${ac_cv_func_remove+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define remove to an innocuous variant, in case <limits.h> declares remove.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define remove innocuous_remove
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef remove
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char remove ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_remove || defined __stub___remove
choke me
#endif
int
main ()
{
return remove ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24268: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24274: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_remove=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_remove=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:24291: result: $ac_cv_func_remove" >&5
echo "${ECHO_T}$ac_cv_func_remove" >&6; }
if test $ac_cv_func_remove = no; then
{ echo "$as_me:24295: checking for remove in -lposix" >&5
echo $ECHO_N "checking for remove in -lposix... $ECHO_C" >&6; }
if test "${ac_cv_lib_posix_remove+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lposix $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char remove ();
int
main ()
{
return remove ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24330: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24336: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_posix_remove=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_posix_remove=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:24354: result: $ac_cv_lib_posix_remove" >&5
echo "${ECHO_T}$ac_cv_lib_posix_remove" >&6; }
if test $ac_cv_lib_posix_remove = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lposix"
fi
fi
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
{ echo "$as_me:24363: checking for shmat" >&5
echo $ECHO_N "checking for shmat... $ECHO_C" >&6; }
if test "${ac_cv_func_shmat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define shmat to an innocuous variant, in case <limits.h> declares shmat.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define shmat innocuous_shmat
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef shmat
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shmat ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_shmat || defined __stub___shmat
choke me
#endif
int
main ()
{
return shmat ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24419: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24425: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func_shmat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func_shmat=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:24442: result: $ac_cv_func_shmat" >&5
echo "${ECHO_T}$ac_cv_func_shmat" >&6; }
if test $ac_cv_func_shmat = yes; then
:
else
{ echo "$as_me:24447: checking for shmat in -lipc" >&5
echo $ECHO_N "checking for shmat in -lipc... $ECHO_C" >&6; }
if test "${ac_cv_lib_ipc_shmat+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lipc $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shmat ();
int
main ()
{
return shmat ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24482: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24488: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_ipc_shmat=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_ipc_shmat=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:24506: result: $ac_cv_lib_ipc_shmat" >&5
echo "${ECHO_T}$ac_cv_lib_ipc_shmat" >&6; }
if test $ac_cv_lib_ipc_shmat = yes; then
X_EXTRA_LIBS="$X_EXTRA_LIBS -lipc"
fi
fi
# more headers that need to be explicitly included on darwin
for ac_header in sys/types.h stdint.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
{ echo "$as_me:24522: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24528: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
{ echo "$as_me:24532: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24549: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24555: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:24569: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:24573: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24588: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24594: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:24608: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:24614: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:24616: WARNING: $ac_header: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:24621: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:24623: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:24625: WARNING: $ac_header: see the Autoconf documentation" >&5
echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
{ echo "$as_me:24627: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:24629: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:24631: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:24636: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24644: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
# sys/bitypes.h is needed for uint32_t and friends on Tru64
for ac_header in sys/bitypes.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
{ echo "$as_me:24664: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24670: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
{ echo "$as_me:24674: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24691: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24697: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:24711: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:24715: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24730: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24736: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:24750: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:24756: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:24758: WARNING: $ac_header: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:24763: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:24765: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:24767: WARNING: $ac_header: see the Autoconf documentation" >&5
echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
{ echo "$as_me:24769: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:24771: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:24773: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:24778: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24786: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
# darwin requires a poll emulation library
{ echo "$as_me:24801: checking for poll in -lpoll" >&5
echo $ECHO_N "checking for poll in -lpoll... $ECHO_C" >&6; }
if test "${ac_cv_lib_poll_poll+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lpoll $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char poll ();
int
main ()
{
return poll ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24836: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24842: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_poll_poll=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_poll_poll=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:24860: result: $ac_cv_lib_poll_poll" >&5
echo "${ECHO_T}$ac_cv_lib_poll_poll" >&6; }
if test $ac_cv_lib_poll_poll = yes; then
LIB_POLL="-lpoll"
fi
# for some image handling on Mac OS X
for ac_header in Carbon/Carbon.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
{ echo "$as_me:24873: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24879: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
{ echo "$as_me:24883: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24900: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24906: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:24920: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:24924: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:24939: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:24945: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:24959: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:24965: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:24967: WARNING: $ac_header: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:24972: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:24974: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:24976: WARNING: $ac_header: see the Autoconf documentation" >&5
echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
{ echo "$as_me:24978: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:24980: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:24982: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:24987: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:24995: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
# CoreAudio framework
if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
{ echo "$as_me:25011: checking for CoreAudio/CoreAudio.h" >&5
echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6; }
if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
{ echo "$as_me:25016: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5
echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6; }
else
# Is the header compilable?
{ echo "$as_me:25020: checking CoreAudio/CoreAudio.h usability" >&5
echo $ECHO_N "checking CoreAudio/CoreAudio.h usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <CoreAudio/CoreAudio.h>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25037: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25043: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:25057: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:25061: checking CoreAudio/CoreAudio.h presence" >&5
echo $ECHO_N "checking CoreAudio/CoreAudio.h presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <CoreAudio/CoreAudio.h>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25076: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25082: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:25096: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:25102: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:25104: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:25109: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: present but cannot be compiled" >&2;}
{ echo "$as_me:25111: WARNING: CoreAudio/CoreAudio.h: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:25113: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: see the Autoconf documentation" >&2;}
{ echo "$as_me:25115: WARNING: CoreAudio/CoreAudio.h: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:25117: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:25119: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: CoreAudio/CoreAudio.h: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:25124: checking for CoreAudio/CoreAudio.h" >&5
echo $ECHO_N "checking for CoreAudio/CoreAudio.h... $ECHO_C" >&6; }
if test "${ac_cv_header_CoreAudio_CoreAudio_h+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_cv_header_CoreAudio_CoreAudio_h=$ac_header_preproc
fi
{ echo "$as_me:25131: result: $ac_cv_header_CoreAudio_CoreAudio_h" >&5
echo "${ECHO_T}$ac_cv_header_CoreAudio_CoreAudio_h" >&6; }
fi
if test $ac_cv_header_CoreAudio_CoreAudio_h = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_COREAUDIO 1
_ACEOF
FRAMEWORK_COREAUDIO="-Wl,-framework,CoreAudio"
fi
{ echo "$as_me:25149: checking if res_init needs -lresolv" >&5
echo $ECHO_N "checking if res_init needs -lresolv... $ECHO_C" >&6; }
kde_libs_safe="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS -lresolv"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>
int
main ()
{
res_init();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25181: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25187: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
LIBRESOLV="-lresolv"
{ echo "$as_me:25195: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
cat >>confdefs.h <<\_ACEOF
#define HAVE_RES_INIT 1
_ACEOF
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ echo "$as_me:25207: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$kde_libs_safe
{ echo "$as_me:25218: checking for res_init" >&5
echo $ECHO_N "checking for res_init... $ECHO_C" >&6; }
if test "${kde_cv_func_res_init+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
kde_safe_LIBS="$LIBS"
LIBS="$LIBS $X_EXTRA_LIBS"
if test "$GXX" = "yes"; then
CXXFLAGS="$CXXFLAGS -pedantic-errors"
fi
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>
int
main ()
{
res_init()
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25270: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25276: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
kde_cv_func_res_init=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_func_res_init=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
LIBS="$kde_safe_LIBS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:25302: result: $kde_cv_func_res_init" >&5
echo "${ECHO_T}$kde_cv_func_res_init" >&6; }
{ echo "$as_me:25305: checking if res_init needs custom prototype" >&5
echo $ECHO_N "checking if res_init needs custom prototype... $ECHO_C" >&6; }
if test "${kde_cv_proto_res_init+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "x$kde_cv_func_res_init" = xyes; then
kde_cv_proto_res_init=no
else
case "res_init" in
setenv|unsetenv|usleep|random|srandom|seteuid|mkstemps|mkstemp|revoke|vsnprintf|strlcpy|strlcat)
kde_cv_proto_res_init="yes - in libkdefakes"
;;
*)
kde_cv_proto_res_init=unknown
;;
esac
fi
if test "x$kde_cv_proto_res_init" = xunknown; then
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
kde_safe_libs=$LIBS
LIBS="$LIBS $X_EXTRA_LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <netinet/in.h>
#include <arpa/nameser.h>
#include <resolv.h>
extern "C" int res_init(void);
int
main ()
{
res_init()
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25370: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25376: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_func_res_init=yes
kde_cv_proto_res_init=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_proto_res_init="res_init unavailable"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$kde_safe_libs
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
fi
{ echo "$as_me:25405: result: $kde_cv_proto_res_init" >&5
echo "${ECHO_T}$kde_cv_proto_res_init" >&6; }
if test "x$kde_cv_func_res_init" = xyes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_RES_INIT 1
_ACEOF
fi
if test "x$kde_cv_proto_res_init" = xno; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_RES_INIT_PROTO 1
_ACEOF
fi
LIBSOCKET="$X_EXTRA_LIBS"
{ echo "$as_me:25433: checking for killpg in -lucb" >&5
echo $ECHO_N "checking for killpg in -lucb... $ECHO_C" >&6; }
if test "${ac_cv_lib_ucb_killpg+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lucb $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char killpg ();
int
main ()
{
return killpg ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25468: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25474: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_ucb_killpg=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_ucb_killpg=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:25492: result: $ac_cv_lib_ucb_killpg" >&5
echo "${ECHO_T}$ac_cv_lib_ucb_killpg" >&6; }
if test $ac_cv_lib_ucb_killpg = yes; then
LIBUCB="-lucb"
fi
case $host in *-*-lynxos* )
{ echo "$as_me:25500: checking LynxOS header file wrappers" >&5
echo $ECHO_N "checking LynxOS header file wrappers... $ECHO_C" >&6; }
CFLAGS="$CFLAGS -D__NO_INCLUDE_WARN__"
{ echo "$as_me:25503: result: disabled" >&5
echo "${ECHO_T}disabled" >&6; }
{ echo "$as_me:25505: checking for gethostbyname in -lbsd" >&5
echo $ECHO_N "checking for gethostbyname in -lbsd... $ECHO_C" >&6; }
if test "${ac_cv_lib_bsd_gethostbyname+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lbsd $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char gethostbyname ();
int
main ()
{
return gethostbyname ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25540: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25546: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_bsd_gethostbyname=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_bsd_gethostbyname=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:25564: result: $ac_cv_lib_bsd_gethostbyname" >&5
echo "${ECHO_T}$ac_cv_lib_bsd_gethostbyname" >&6; }
if test $ac_cv_lib_bsd_gethostbyname = yes; then
LIBSOCKET="-lbsd"
fi
;;
esac
{ echo "$as_me:25572: checking for int" >&5
echo $ECHO_N "checking for int... $ECHO_C" >&6; }
if test "${ac_cv_type_int+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25602: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25608: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_int=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_int=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:25623: result: $ac_cv_type_int" >&5
echo "${ECHO_T}$ac_cv_type_int" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:25630: checking size of int" >&5
echo $ECHO_N "checking size of int... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_int+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25661: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25667: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25698: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25704: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25752: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25758: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25789: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25795: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25853: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:25859: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_int=$ac_lo;;
'') if test "$ac_cv_type_int" = yes; then
{ { echo "$as_me:25877: error: cannot compute sizeof (int)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (int)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_int=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef int ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25932: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:25935: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:25941: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:25944: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_int=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_int" = yes; then
{ { echo "$as_me:25954: error: cannot compute sizeof (int)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (int)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_int=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:25967: result: $ac_cv_sizeof_int" >&5
echo "${ECHO_T}$ac_cv_sizeof_int" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_INT $ac_cv_sizeof_int
_ACEOF
{ echo "$as_me:25976: checking for short" >&5
echo $ECHO_N "checking for short... $ECHO_C" >&6; }
if test "${ac_cv_type_short+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26006: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26012: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_short=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_short=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:26027: result: $ac_cv_type_short" >&5
echo "${ECHO_T}$ac_cv_type_short" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:26034: checking size of short" >&5
echo $ECHO_N "checking size of short... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_short+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26065: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26071: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26102: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26108: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26156: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26162: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26193: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26199: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26257: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26263: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_short=$ac_lo;;
'') if test "$ac_cv_type_short" = yes; then
{ { echo "$as_me:26281: error: cannot compute sizeof (short)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (short)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_short=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef short ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26336: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:26339: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26345: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:26348: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_short=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_short" = yes; then
{ { echo "$as_me:26358: error: cannot compute sizeof (short)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (short)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_short=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:26371: result: $ac_cv_sizeof_short" >&5
echo "${ECHO_T}$ac_cv_sizeof_short" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_SHORT $ac_cv_sizeof_short
_ACEOF
{ echo "$as_me:26380: checking for long" >&5
echo $ECHO_N "checking for long... $ECHO_C" >&6; }
if test "${ac_cv_type_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26410: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26416: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_long=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_long=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:26431: result: $ac_cv_type_long" >&5
echo "${ECHO_T}$ac_cv_type_long" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:26438: checking size of long" >&5
echo $ECHO_N "checking size of long... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26469: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26475: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26506: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26512: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26560: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26566: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26597: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26603: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26661: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26667: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_long=$ac_lo;;
'') if test "$ac_cv_type_long" = yes; then
{ { echo "$as_me:26685: error: cannot compute sizeof (long)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (long)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_long=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef long ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26740: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:26743: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26749: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:26752: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_long=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_long" = yes; then
{ { echo "$as_me:26762: error: cannot compute sizeof (long)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (long)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_long=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:26775: result: $ac_cv_sizeof_long" >&5
echo "${ECHO_T}$ac_cv_sizeof_long" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_LONG $ac_cv_sizeof_long
_ACEOF
{ echo "$as_me:26784: checking for char *" >&5
echo $ECHO_N "checking for char *... $ECHO_C" >&6; }
if test "${ac_cv_type_char_p+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26814: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26820: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_char_p=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_char_p=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:26835: result: $ac_cv_type_char_p" >&5
echo "${ECHO_T}$ac_cv_type_char_p" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:26842: checking size of char *" >&5
echo $ECHO_N "checking size of char *... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_char_p+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26873: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26879: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26910: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26916: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:26964: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:26970: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27001: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27007: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27065: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27071: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_char_p=$ac_lo;;
'') if test "$ac_cv_type_char_p" = yes; then
{ { echo "$as_me:27089: error: cannot compute sizeof (char *)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (char *)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_char_p=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef char * ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27144: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:27147: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27153: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:27156: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_char_p=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_char_p" = yes; then
{ { echo "$as_me:27166: error: cannot compute sizeof (char *)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (char *)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_char_p=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:27179: result: $ac_cv_sizeof_char_p" >&5
echo "${ECHO_T}$ac_cv_sizeof_char_p" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_CHAR_P $ac_cv_sizeof_char_p
_ACEOF
{ echo "$as_me:27190: checking for dlopen in -ldl" >&5
echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; }
if test "${ac_cv_lib_dl_dlopen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldl $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char dlopen ();
int
main ()
{
return dlopen ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27225: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27231: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dl_dlopen=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dl_dlopen=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:27249: result: $ac_cv_lib_dl_dlopen" >&5
echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; }
if test $ac_cv_lib_dl_dlopen = yes; then
LIBDL="-ldl"
ac_cv_have_dlfcn=yes
fi
{ echo "$as_me:27259: checking for shl_unload in -ldld" >&5
echo $ECHO_N "checking for shl_unload in -ldld... $ECHO_C" >&6; }
if test "${ac_cv_lib_dld_shl_unload+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-ldld $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char shl_unload ();
int
main ()
{
return shl_unload ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27294: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27300: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_dld_shl_unload=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_dld_shl_unload=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:27318: result: $ac_cv_lib_dld_shl_unload" >&5
echo "${ECHO_T}$ac_cv_lib_dld_shl_unload" >&6; }
if test $ac_cv_lib_dld_shl_unload = yes; then
LIBDL="-ldld"
ac_cv_have_shload=yes
fi
{ echo "$as_me:27333: checking for size_t" >&5
echo $ECHO_N "checking for size_t... $ECHO_C" >&6; }
if test "${ac_cv_type_size_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27363: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27369: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_size_t=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_size_t=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:27384: result: $ac_cv_type_size_t" >&5
echo "${ECHO_T}$ac_cv_type_size_t" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:27391: checking size of size_t" >&5
echo $ECHO_N "checking size of size_t... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_size_t+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27422: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27428: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27459: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27465: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27513: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27519: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27550: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27556: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27614: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27620: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_size_t=$ac_lo;;
'') if test "$ac_cv_type_size_t" = yes; then
{ { echo "$as_me:27638: error: cannot compute sizeof (size_t)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (size_t)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_size_t=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef size_t ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27693: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:27696: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27702: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:27705: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_size_t=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_size_t" = yes; then
{ { echo "$as_me:27715: error: cannot compute sizeof (size_t)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (size_t)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_size_t=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:27728: result: $ac_cv_sizeof_size_t" >&5
echo "${ECHO_T}$ac_cv_sizeof_size_t" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_SIZE_T $ac_cv_sizeof_size_t
_ACEOF
{ echo "$as_me:27738: checking for unsigned long" >&5
echo $ECHO_N "checking for unsigned long... $ECHO_C" >&6; }
if test "${ac_cv_type_unsigned_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_new_;
int
main ()
{
if ((ac__type_new_ *) 0)
return 0;
if (sizeof (ac__type_new_))
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27768: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27774: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_type_unsigned_long=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_type_unsigned_long=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:27789: result: $ac_cv_type_unsigned_long" >&5
echo "${ECHO_T}$ac_cv_type_unsigned_long" >&6; }
# The cast to long int works around a bug in the HP C Compiler
# version HP92453-01 B.11.11.23709.GP, which incorrectly rejects
# declarations like `int a3[[(sizeof (unsigned char)) >= 0]];'.
# This bug is HP SR number 8606223364.
{ echo "$as_me:27796: checking size of unsigned long" >&5
echo $ECHO_N "checking size of unsigned long... $ECHO_C" >&6; }
if test "${ac_cv_sizeof_unsigned_long+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$cross_compiling" = yes; then
# Depending upon the size, compute the lo and hi bounds.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27827: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27833: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=0 ac_mid=0
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27864: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27870: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr $ac_mid + 1`
if test $ac_lo -le $ac_mid; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) < 0)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27918: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27924: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=-1 ac_mid=-1
while :; do
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) >= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:27955: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:27961: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_lo=$ac_mid; break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_hi=`expr '(' $ac_mid ')' - 1`
if test $ac_mid -le $ac_hi; then
ac_lo= ac_hi=
break
fi
ac_mid=`expr 2 '*' $ac_mid`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo= ac_hi=
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
# Binary search between lo and hi bounds.
while test "x$ac_lo" != "x$ac_hi"; do
ac_mid=`expr '(' $ac_hi - $ac_lo ')' / 2 + $ac_lo`
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
int
main ()
{
static int test_array [1 - 2 * !(((long int) (sizeof (ac__type_sizeof_))) <= $ac_mid)];
test_array [0] = 0
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28019: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28025: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_hi=$ac_mid
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_lo=`expr '(' $ac_mid ')' + 1`
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
done
case $ac_lo in
?*) ac_cv_sizeof_unsigned_long=$ac_lo;;
'') if test "$ac_cv_type_unsigned_long" = yes; then
{ { echo "$as_me:28043: error: cannot compute sizeof (unsigned long)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (unsigned long)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_unsigned_long=0
fi ;;
esac
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
typedef unsigned long ac__type_sizeof_;
static long int longval () { return (long int) (sizeof (ac__type_sizeof_)); }
static unsigned long int ulongval () { return (long int) (sizeof (ac__type_sizeof_)); }
#include <stdio.h>
#include <stdlib.h>
int
main ()
{
FILE *f = fopen ("conftest.val", "w");
if (! f)
return 1;
if (((long int) (sizeof (ac__type_sizeof_))) < 0)
{
long int i = longval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%ld\n", i);
}
else
{
unsigned long int i = ulongval ();
if (i != ((long int) (sizeof (ac__type_sizeof_))))
return 1;
fprintf (f, "%lu\n", i);
}
return ferror (f) || fclose (f) != 0;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28098: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:28101: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28107: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:28110: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_sizeof_unsigned_long=`cat conftest.val`
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
if test "$ac_cv_type_unsigned_long" = yes; then
{ { echo "$as_me:28120: error: cannot compute sizeof (unsigned long)
See \`config.log' for more details." >&5
echo "$as_me: error: cannot compute sizeof (unsigned long)
See \`config.log' for more details." >&2;}
{ (exit 77); exit 77; }; }
else
ac_cv_sizeof_unsigned_long=0
fi
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
rm -f conftest.val
fi
{ echo "$as_me:28133: result: $ac_cv_sizeof_unsigned_long" >&5
echo "${ECHO_T}$ac_cv_sizeof_unsigned_long" >&6; }
cat >>confdefs.h <<_ACEOF
#define SIZEOF_UNSIGNED_LONG $ac_cv_sizeof_unsigned_long
_ACEOF
{ echo "$as_me:28144: checking sizeof size_t == sizeof unsigned long" >&5
echo $ECHO_N "checking sizeof size_t == sizeof unsigned long... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
#if SIZEOF_SIZE_T != SIZEOF_UNSIGNED_LONG
choke me
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28171: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28177: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
{ echo "$as_me:28182: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ echo "$as_me:28189: result: no" >&5
echo "${ECHO_T}no" >&6; }
{ { echo "$as_me:28191: error:
Apparently on your system our assumption sizeof size_t == sizeof unsigned long
does not apply. Please mail kde-devel@kde.org with a description of your system!
" >&5
echo "$as_me: error:
Apparently on your system our assumption sizeof size_t == sizeof unsigned long
does not apply. Please mail kde-devel@kde.org with a description of your system!
" >&2;}
{ (exit 1); exit 1; }; }
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:28206: checking for PIE support" >&5
echo $ECHO_N "checking for PIE support... $ECHO_C" >&6; }
if test "${kde_cv_val_pie_support+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
safe_CXXFLAGS=$CXXFLAGS
safe_LDFLAGS=$LDFLAGS
CXXFLAGS="$CXXFLAGS -fPIE"
LDFLAGS="$LDFLAGS -pie"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int foo;
int
main ()
{
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28248: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28254: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_val_pie_support=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_val_pie_support=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS=$safe_CXXFLAGS
LDFLAGS=$safe_LDFLAGS
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
{ echo "$as_me:28281: result: $kde_cv_val_pie_support" >&5
echo "${ECHO_T}$kde_cv_val_pie_support" >&6; }
{ echo "$as_me:28284: checking if enabling -pie/fPIE support" >&5
echo $ECHO_N "checking if enabling -pie/fPIE support... $ECHO_C" >&6; }
# Check whether --enable-pie was given.
if test "${enable_pie+set}" = set; then
enableval=$enable_pie; kde_has_pie_support=$enableval
else
kde_has_pie_support=detect
fi
if test "$kde_has_pie_support" = "detect"; then
kde_has_pie_support=$kde_cv_val_pie_support
fi
{ echo "$as_me:28299: result: $kde_has_pie_support" >&5
echo "${ECHO_T}$kde_has_pie_support" >&6; }
KDE_USE_FPIE=""
KDE_USE_PIE=""
if test "$kde_has_pie_support" = "yes"; then
KDE_USE_FPIE="-fPIE"
KDE_USE_PIE="-pie"
fi
# darwin needs this to initialize the environment
for ac_header in crt_externs.h
do
as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh`
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
{ echo "$as_me:28320: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:28326: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
else
# Is the header compilable?
{ echo "$as_me:28330: checking $ac_header usability" >&5
echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
#include <$ac_header>
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28347: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28353: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_header_compiler=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_compiler=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
{ echo "$as_me:28367: result: $ac_header_compiler" >&5
echo "${ECHO_T}$ac_header_compiler" >&6; }
# Is the header present?
{ echo "$as_me:28371: checking $ac_header presence" >&5
echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; }
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$ac_header>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28386: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28392: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
ac_header_preproc=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_header_preproc=no
fi
rm -f conftest.err conftest.$ac_ext
{ echo "$as_me:28406: result: $ac_header_preproc" >&5
echo "${ECHO_T}$ac_header_preproc" >&6; }
# So? What about this header?
case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in
yes:no: )
{ echo "$as_me:28412: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&5
echo "$as_me: WARNING: $ac_header: accepted by the compiler, rejected by the preprocessor!" >&2;}
{ echo "$as_me:28414: WARNING: $ac_header: proceeding with the compiler's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the compiler's result" >&2;}
ac_header_preproc=yes
;;
no:yes:* )
{ echo "$as_me:28419: WARNING: $ac_header: present but cannot be compiled" >&5
echo "$as_me: WARNING: $ac_header: present but cannot be compiled" >&2;}
{ echo "$as_me:28421: WARNING: $ac_header: check for missing prerequisite headers?" >&5
echo "$as_me: WARNING: $ac_header: check for missing prerequisite headers?" >&2;}
{ echo "$as_me:28423: WARNING: $ac_header: see the Autoconf documentation" >&5
echo "$as_me: WARNING: $ac_header: see the Autoconf documentation" >&2;}
{ echo "$as_me:28425: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&5
echo "$as_me: WARNING: $ac_header: section \"Present But Cannot Be Compiled\"" >&2;}
{ echo "$as_me:28427: WARNING: $ac_header: proceeding with the preprocessor's result" >&5
echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;}
{ echo "$as_me:28429: WARNING: $ac_header: in the future, the compiler will take precedence" >&5
echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;}
;;
esac
{ echo "$as_me:28434: checking for $ac_header" >&5
echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; }
if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
eval "$as_ac_Header=\$ac_header_preproc"
fi
ac_res=`eval echo '${'$as_ac_Header'}'`
{ echo "$as_me:28442: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
fi
if test `eval echo '${'$as_ac_Header'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_header" | $as_tr_cpp` 1
_ACEOF
fi
done
{ echo "$as_me:28455: checking for _NSGetEnviron" >&5
echo $ECHO_N "checking for _NSGetEnviron... $ECHO_C" >&6; }
if test "${ac_cv_func__NSGetEnviron+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define _NSGetEnviron to an innocuous variant, in case <limits.h> declares _NSGetEnviron.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define _NSGetEnviron innocuous__NSGetEnviron
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char _NSGetEnviron (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef _NSGetEnviron
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char _NSGetEnviron ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub__NSGetEnviron || defined __stub____NSGetEnviron
choke me
#endif
int
main ()
{
return _NSGetEnviron ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28511: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28517: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_func__NSGetEnviron=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_func__NSGetEnviron=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
{ echo "$as_me:28534: result: $ac_cv_func__NSGetEnviron" >&5
echo "${ECHO_T}$ac_cv_func__NSGetEnviron" >&6; }
if test $ac_cv_func__NSGetEnviron = yes; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_NSGETENVIRON 1
_ACEOF
fi
for ac_func in vsnprintf snprintf
do
as_ac_var=`echo "ac_cv_func_$ac_func" | $as_tr_sh`
{ echo "$as_me:28556: checking for $ac_func" >&5
echo $ECHO_N "checking for $ac_func... $ECHO_C" >&6; }
if { as_var=$as_ac_var; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Define $ac_func to an innocuous variant, in case <limits.h> declares $ac_func.
For example, HP-UX 11i <limits.h> declares gettimeofday. */
#define $ac_func innocuous_$ac_func
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func (); below.
Prefer <limits.h> to <assert.h> if __STDC__ is defined, since
<limits.h> exists even on freestanding compilers. */
#ifdef __STDC__
# include <limits.h>
#else
# include <assert.h>
#endif
#undef $ac_func
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char $ac_func ();
/* The GNU C library defines this for functions which it implements
to always fail with ENOSYS. Some functions are actually named
something starting with __ and the normal name is an alias. */
#if defined __stub_$ac_func || defined __stub___$ac_func
choke me
#endif
int
main ()
{
return $ac_func ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28612: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28618: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "$as_ac_var=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "$as_ac_var=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi
ac_res=`eval echo '${'$as_ac_var'}'`
{ echo "$as_me:28636: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_var'}'` = yes; then
cat >>confdefs.h <<_ACEOF
#define `echo "HAVE_$ac_func" | $as_tr_cpp` 1
_ACEOF
fi
done
# Check whether --enable-embedded was given.
if test "${enable_embedded+set}" = set; then
enableval=$enable_embedded; kde_use_qt_emb=$enableval
else
kde_use_qt_emb=no
fi
# Check whether --enable-qtopia was given.
if test "${enable_qtopia+set}" = set; then
enableval=$enable_qtopia; kde_use_qt_emb_palm=$enableval
else
kde_use_qt_emb_palm=no
fi
# Check whether --enable-mac was given.
if test "${enable_mac+set}" = set; then
enableval=$enable_mac; kde_use_qt_mac=$enableval
else
kde_use_qt_mac=no
fi
# used to disable x11-specific stuff on special platforms
if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then
include_x11_TRUE=
include_x11_FALSE='#'
else
include_x11_TRUE='#'
include_x11_FALSE=
fi
if test "$kde_use_qt_emb" = "no" && test "$kde_use_qt_mac" = "no"; then
{ echo "$as_me:28695: checking for X" >&5
echo $ECHO_N "checking for X... $ECHO_C" >&6; }
if test "${kde_cv_have_x+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# One or both of the vars are not set, and there is no cached value.
if test "{$x_includes+set}" = set || test "$x_includes" = NONE; then
kde_x_includes=NO
else
kde_x_includes=$x_includes
fi
if test "{$x_libraries+set}" = set || test "$x_libraries" = NONE; then
kde_x_libraries=NO
else
kde_x_libraries=$x_libraries
fi
# below we use the standard autoconf calls
ac_x_libraries=$kde_x_libraries
ac_x_includes=$kde_x_includes
if test "$ac_x_includes" = NO; then
# Guess where to find include files, by looking for this one X11 .h file.
test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
# First, try using that file with no special directory specified.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <$x_direct_test_include>
_ACEOF
if { (ac_try="$ac_cpp conftest.$ac_ext"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28738: $ac_try_echo\"") >&5
(eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28744: \$? = $ac_status" >&5
(exit $ac_status); } >/dev/null && {
test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" ||
test ! -s conftest.err
}; then
# We can compile using X headers with no special include directory.
ac_x_includes=
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# Look for the header file in a standard set of common directories.
# Check X11 before X11Rn because it is often a symlink to the current release.
for ac_dir in \
/usr/X11/include \
/usr/X11R6/include \
/usr/X11R5/include \
/usr/X11R4/include \
\
/usr/include/X11 \
/usr/include/X11R6 \
/usr/include/X11R5 \
/usr/include/X11R4 \
\
/usr/local/X11/include \
/usr/local/X11R6/include \
/usr/local/X11R5/include \
/usr/local/X11R4/include \
\
/usr/local/include/X11 \
/usr/local/include/X11R6 \
/usr/local/include/X11R5 \
/usr/local/include/X11R4 \
\
/usr/X386/include \
/usr/x386/include \
/usr/XFree86/include/X11 \
\
/usr/include \
/usr/local/include \
/usr/unsupported/include \
/usr/athena/include \
/usr/local/x11r5/include \
/usr/lpp/Xamples/include \
\
/usr/openwin/include \
/usr/openwin/share/include \
; \
do
if test -r "$ac_dir/$x_direct_test_include"; then
ac_x_includes=$ac_dir
break
fi
done
fi
rm -f conftest.err conftest.$ac_ext
fi # $ac_x_includes = NO
if test "$ac_x_libraries" = NO; then
# Check for the libraries.
test -z "$x_direct_test_library" && x_direct_test_library=Xt
test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
# See if we find them without any special options.
# Don't add to $LIBS permanently.
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <X11/Intrinsic.h>
int
main ()
{
${x_direct_test_function}(1)
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:28834: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:28840: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
ac_x_libraries=
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
LIBS="$ac_save_LIBS"
# First see if replacing the include by lib works.
# Check X11 before X11Rn because it is often a symlink to the current release.
for ac_dir in `echo "$ac_x_includes" | sed s/include/lib${kdelibsuff}/` \
/usr/X11/lib${kdelibsuff} \
/usr/X11R6/lib${kdelibsuff} \
/usr/X11R5/lib${kdelibsuff} \
/usr/X11R4/lib${kdelibsuff} \
\
/usr/lib${kdelibsuff}/X11 \
/usr/lib${kdelibsuff}/X11R6 \
/usr/lib${kdelibsuff}/X11R5 \
/usr/lib${kdelibsuff}/X11R4 \
\
/usr/local/X11/lib${kdelibsuff} \
/usr/local/X11R6/lib${kdelibsuff} \
/usr/local/X11R5/lib${kdelibsuff} \
/usr/local/X11R4/lib${kdelibsuff} \
\
/usr/local/lib${kdelibsuff}/X11 \
/usr/local/lib${kdelibsuff}/X11R6 \
/usr/local/lib${kdelibsuff}/X11R5 \
/usr/local/lib${kdelibsuff}/X11R4 \
\
/usr/X386/lib${kdelibsuff} \
/usr/x386/lib${kdelibsuff} \
/usr/XFree86/lib${kdelibsuff}/X11 \
\
/usr/lib${kdelibsuff} \
/usr/local/lib${kdelibsuff} \
/usr/unsupported/lib${kdelibsuff} \
/usr/athena/lib${kdelibsuff} \
/usr/local/x11r5/lib${kdelibsuff} \
/usr/lpp/Xamples/lib${kdelibsuff} \
/lib/usr/lib${kdelibsuff}/X11 \
\
/usr/openwin/lib${kdelibsuff} \
/usr/openwin/share/lib${kdelibsuff} \
; \
do
for ac_extension in a so sl; do
if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
ac_x_libraries=$ac_dir
break 2
fi
done
done
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
fi # $ac_x_libraries = NO
case "$host" in
mips-sgi-irix6*)
;;
*-*-solaris*)
;;
*)
rm -f -r conftest.dir
if mkdir conftest.dir; then
cd conftest.dir
cat >Imakefile <<'_ACEOF'
incroot:
@echo incroot='${INCROOT}'
usrlibdir:
@echo usrlibdir='${USRLIBDIR}'
libdir:
@echo libdir='${LIBDIR}'
_ACEOF
if (export CC; ${XMKMF-xmkmf}) >/dev/null 2>/dev/null && test -f Makefile; then
# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
for ac_var in incroot usrlibdir libdir; do
eval "ac_im_$ac_var=\`\${MAKE-make} $ac_var 2>/dev/null | sed -n 's/^$ac_var=//p'\`"
done
# Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
for ac_extension in a so sl; do
if test ! -f "$ac_im_usrlibdir/libX11.$ac_extension" &&
test -f "$ac_im_libdir/libX11.$ac_extension"; then
ac_im_usrlibdir=$ac_im_libdir; break
fi
done
# Screen out bogus values from the imake configuration. They are
# bogus both because they are the default anyway, and because
# using them would break gcc on systems where it needs fixed includes.
case $ac_im_incroot in
/usr/include) ac_x_includes= ;;
*) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes=$ac_im_incroot;;
esac
case $ac_im_usrlibdir in
/usr/lib | /lib) ;;
*) test -d "$ac_im_usrlibdir" && ac_x_libraries=$ac_im_usrlibdir ;;
esac
fi
cd ..
rm -f -r conftest.dir
fi
if test -z "$ac_x_includes"; then
ac_x_includes="."
fi
if test -z "$ac_x_libraries"; then
ac_x_libraries="/usr/lib${kdelibsuff}"
fi
esac
#from now on we use our own again
# when the user already gave --x-includes, we ignore
# what the standard autoconf macros told us.
if test "$kde_x_includes" = NO; then
kde_x_includes=$ac_x_includes
fi
# for --x-libraries too
if test "$kde_x_libraries" = NO; then
kde_x_libraries=$ac_x_libraries
fi
if test "$kde_x_includes" = NO; then
{ { echo "$as_me:28972: error: Can't find X includes. Please check your installation and add the correct paths!" >&5
echo "$as_me: error: Can't find X includes. Please check your installation and add the correct paths!" >&2;}
{ (exit 1); exit 1; }; }
fi
if test "$kde_x_libraries" = NO; then
{ { echo "$as_me:28978: error: Can't find X libraries. Please check your installation and add the correct paths!" >&5
echo "$as_me: error: Can't find X libraries. Please check your installation and add the correct paths!" >&2;}
{ (exit 1); exit 1; }; }
fi
# Record where we found X for the cache.
kde_cv_have_x="have_x=yes \
kde_x_includes=$kde_x_includes kde_x_libraries=$kde_x_libraries"
fi
eval "$kde_cv_have_x"
if test "$have_x" != yes; then
{ echo "$as_me:28992: result: $have_x" >&5
echo "${ECHO_T}$have_x" >&6; }
no_x=yes
else
{ echo "$as_me:28996: result: libraries $kde_x_libraries, headers $kde_x_includes" >&5
echo "${ECHO_T}libraries $kde_x_libraries, headers $kde_x_includes" >&6; }
fi
if test -z "$kde_x_includes" || test "x$kde_x_includes" = xNONE; then
X_INCLUDES=""
x_includes="."; else
x_includes=$kde_x_includes
X_INCLUDES="-I$x_includes"
fi
if test -z "$kde_x_libraries" || test "x$kde_x_libraries" = xNONE || test "$kde_x_libraries" = "/usr/lib"; then
X_LDFLAGS=""
x_libraries="/usr/lib"; else
x_libraries=$kde_x_libraries
X_LDFLAGS="-L$x_libraries"
fi
all_includes="$X_INCLUDES"
all_libraries="$X_LDFLAGS $LDFLAGS_AS_NEEDED $LDFLAGS_NEW_DTAGS"
# Check for libraries that X11R6 Xt/Xaw programs need.
ac_save_LDFLAGS="$LDFLAGS"
LDFLAGS="$LDFLAGS $X_LDFLAGS"
# SM needs ICE to (dynamically) link under SunOS 4.x (so we have to
# check for ICE first), but we must link in the order -lSM -lICE or
# we get undefined symbols. So assume we have SM if we have ICE.
# These have to be linked with before -lX11, unlike the other
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
{ echo "$as_me:29025: checking for IceConnectionNumber in -lICE" >&5
echo $ECHO_N "checking for IceConnectionNumber in -lICE... $ECHO_C" >&6; }
if test "${ac_cv_lib_ICE_IceConnectionNumber+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char IceConnectionNumber ();
int
main ()
{
return IceConnectionNumber ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29060: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29066: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_ICE_IceConnectionNumber=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_ICE_IceConnectionNumber=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:29084: result: $ac_cv_lib_ICE_IceConnectionNumber" >&5
echo "${ECHO_T}$ac_cv_lib_ICE_IceConnectionNumber" >&6; }
if test $ac_cv_lib_ICE_IceConnectionNumber = yes; then
LIBSM="-lSM -lICE"
fi
LDFLAGS="$ac_save_LDFLAGS"
LIB_X11='-lX11 $(LIBSOCKET)'
{ echo "$as_me:29094: checking for libXext" >&5
echo $ECHO_N "checking for libXext... $ECHO_C" >&6; }
if test "${kde_cv_have_libXext+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_ldflags_safe="$LDFLAGS"
kde_libs_safe="$LIBS"
LDFLAGS="$LDFLAGS $X_LDFLAGS $USER_LDFLAGS"
LIBS="-lXext -lX11 $LIBSOCKET"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <stdio.h>
#ifdef STDC_HEADERS
# include <stdlib.h>
#endif
int
main ()
{
printf("hello Xext\n");
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29134: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29140: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
kde_cv_have_libXext=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
kde_cv_have_libXext=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LDFLAGS=$kde_ldflags_safe
LIBS=$kde_libs_safe
fi
{ echo "$as_me:29164: result: $kde_cv_have_libXext" >&5
echo "${ECHO_T}$kde_cv_have_libXext" >&6; }
if test "$kde_cv_have_libXext" = "no"; then
{ { echo "$as_me:29168: error: We need a working libXext to proceed. Since configure
can't find it itself, we stop here assuming that make wouldn't find
them either." >&5
echo "$as_me: error: We need a working libXext to proceed. Since configure
can't find it itself, we stop here assuming that make wouldn't find
them either." >&2;}
{ (exit 1); exit 1; }; }
fi
LIB_XEXT="-lXext"
QTE_NORTTI=""
elif test "$kde_use_qt_emb" = "yes"; then
CPPFLAGS=-DQWS
CXXFLAGS="$CXXFLAGS -fno-rtti"
QTE_NORTTI="-fno-rtti -DQWS"
X_PRE_LIBS=""
LIB_X11=""
LIB_XEXT=""
LIB_XRENDER=""
LIBSM=""
X_INCLUDES=""
X_LDFLAGS=""
x_includes=""
x_libraries=""
elif test "$kde_use_qt_mac" = "yes"; then
CXXFLAGS="$CXXFLAGS -DQT_MAC -no-cpp-precomp"
CFLAGS="$CFLAGS -DQT_MAC -no-cpp-precomp"
X_PRE_LIBS=""
LIB_X11=""
LIB_XEXT=""
LIB_XRENDER=""
LIBSM=""
X_INCLUDES=""
X_LDFLAGS=""
x_includes=""
x_libraries=""
fi
LIBPTHREAD=""
if test -n "$PTHREAD_LIBS"; then
if test "x$PTHREAD_LIBS" = "x-pthread" ; then
LIBPTHREAD="PTHREAD"
else
PTHREAD_LIBS_save="$PTHREAD_LIBS"
PTHREAD_LIBS=`echo "$PTHREAD_LIBS_save" | sed -e 's,^-l,,g'`
{ echo "$as_me:29227: checking for pthread_create in $PTHREAD_LIBS" >&5
echo $ECHO_N "checking for pthread_create in $PTHREAD_LIBS... $ECHO_C" >&6; }
kde_save_LDFLAGS="$LDFLAGS"
kde_save_LIBS="$LIBS"
LDFLAGS="$LDFLAGS $all_libraries"
case $host_os in
aix*) LDFLAGS="-brtl $LDFLAGS"
test "$GCC" = yes && LDFLAGS="-Wl,$LDFLAGS"
;;
esac
as_ac_Lib=`echo "ac_cv_lib_$PTHREAD_LIBS''_pthread_create" | $as_tr_sh`
{ echo "$as_me:29239: checking for pthread_create in -l$PTHREAD_LIBS" >&5
echo $ECHO_N "checking for pthread_create in -l$PTHREAD_LIBS... $ECHO_C" >&6; }
if { as_var=$as_ac_Lib; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-l$PTHREAD_LIBS $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char pthread_create ();
int
main ()
{
return pthread_create ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29274: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29280: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "$as_ac_Lib=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "$as_ac_Lib=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
ac_res=`eval echo '${'$as_ac_Lib'}'`
{ echo "$as_me:29299: result: $ac_res" >&5
echo "${ECHO_T}$ac_res" >&6; }
if test `eval echo '${'$as_ac_Lib'}'` = yes; then
LIBPTHREAD="$PTHREAD_LIBS_save"
fi
LDFLAGS="$kde_save_LDFLAGS"
LIBS="$kde_save_LIBS"
PTHREAD_LIBS="$PTHREAD_LIBS_save"
fi
fi
if test -z "$LIBPTHREAD"; then
{ echo "$as_me:29313: checking for pthread_create in -lpthread" >&5
echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6; }
if test "${ac_cv_lib_pthread_pthread_create+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_check_lib_save_LIBS=$LIBS
LIBS="-lpthread $LIBS"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
/* Override any GCC internal prototype to avoid an error.
Use char because int might match the return type of a GCC
builtin and then its argument prototype would still apply. */
#ifdef __cplusplus
extern "C"
#endif
char pthread_create ();
int
main ()
{
return pthread_create ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29348: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29354: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
ac_cv_lib_pthread_pthread_create=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_lib_pthread_pthread_create=no
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$ac_check_lib_save_LIBS
fi
{ echo "$as_me:29372: result: $ac_cv_lib_pthread_pthread_create" >&5
echo "${ECHO_T}$ac_cv_lib_pthread_pthread_create" >&6; }
if test $ac_cv_lib_pthread_pthread_create = yes; then
LIBPTHREAD="-lpthread"
fi
fi
if test -z "$LIBPTHREAD" ; then
{ echo "$as_me:29381: checking for pthread_create in -lpthread" >&5
echo $ECHO_N "checking for pthread_create in -lpthread... $ECHO_C" >&6; }
kde_safe_libs=$LIBS
LIBS="$LIBS -lpthread"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <pthread.h>
int
main ()
{
(void)pthread_create(0,0,0,0);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29406: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29412: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
{ echo "$as_me:29419: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
LIBPTHREAD="-lpthread"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
{ echo "$as_me:29427: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS=$kde_safe_libs
fi
if test "x$LIBPTHREAD" = "xPTHREAD" ; then
LIBPTHREAD=""
fi
USE_THREADS=""
if test -z "$LIBPTHREAD"; then
{ echo "$as_me:29446: checking whether $CXX supports -pthread" >&5
echo $ECHO_N "checking whether $CXX supports -pthread... $ECHO_C" >&6; }
kde_cache=`echo pthread | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -pthread"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29486: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29492: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:29519: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
USE_THREADS="-D_THREAD_SAFE -pthread"
else
{ echo "$as_me:29524: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
fi
case $host_os in
solaris*)
{ echo "$as_me:29537: checking whether $CXX supports -mt" >&5
echo $ECHO_N "checking whether $CXX supports -mt... $ECHO_C" >&6; }
kde_cache=`echo mt | sed 'y% .=/+-,%____p__%'`
if { as_var=kde_cv_prog_cxx_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS -mt"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
int
main ()
{
return 0;
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29577: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29583: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_prog_cxx_$kde_cache=yes"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
CXXFLAGS="$save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if eval "test \"`echo '$kde_cv_prog_cxx_'$kde_cache`\" = yes"; then
{ echo "$as_me:29610: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
USE_THREADS="-mt"
else
{ echo "$as_me:29615: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
fi
CPPFLAGS="$CPPFLAGS -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -DUSE_SOLARIS -DSVR4"
;;
freebsd*)
CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE $PTHREAD_CFLAGS"
;;
aix*)
CPPFLAGS="$CPPFLAGS -D_THREAD_SAFE"
LIBPTHREAD="$LIBPTHREAD -lc_r"
;;
linux*) CPPFLAGS="$CPPFLAGS -D_REENTRANT"
if test "$CXX" = "KCC"; then
CXXFLAGS="$CXXFLAGS --thread_safe"
NOOPT_CXXFLAGS="$NOOPT_CXXFLAGS --thread_safe"
fi
;;
*)
;;
esac
{ echo "$as_me:29643: checking for extra includes" >&5
echo $ECHO_N "checking for extra includes... $ECHO_C" >&6; }
# Check whether --with-extra-includes was given.
if test "${with_extra_includes+set}" = set; then
withval=$with_extra_includes; kde_use_extra_includes="$withval"
else
kde_use_extra_includes=NONE
fi
kde_extra_includes=
if test -n "$kde_use_extra_includes" && \
test "$kde_use_extra_includes" != "NONE"; then
ac_save_ifs=$IFS
IFS=':'
for dir in $kde_use_extra_includes; do
kde_extra_includes="$kde_extra_includes $dir"
USER_INCLUDES="$USER_INCLUDES -I$dir"
done
IFS=$ac_save_ifs
kde_use_extra_includes="added"
else
kde_use_extra_includes="no"
fi
{ echo "$as_me:29671: result: $kde_use_extra_includes" >&5
echo "${ECHO_T}$kde_use_extra_includes" >&6; }
kde_extra_libs=
{ echo "$as_me:29675: checking for extra libs" >&5
echo $ECHO_N "checking for extra libs... $ECHO_C" >&6; }
# Check whether --with-extra-libs was given.
if test "${with_extra_libs+set}" = set; then
withval=$with_extra_libs; kde_use_extra_libs=$withval
else
kde_use_extra_libs=NONE
fi
if test -n "$kde_use_extra_libs" && \
test "$kde_use_extra_libs" != "NONE"; then
ac_save_ifs=$IFS
IFS=':'
for dir in $kde_use_extra_libs; do
kde_extra_libs="$kde_extra_libs $dir"
KDE_EXTRA_RPATH="$KDE_EXTRA_RPATH -R $dir"
USER_LDFLAGS="$USER_LDFLAGS -L$dir"
done
IFS=$ac_save_ifs
kde_use_extra_libs="added"
else
kde_use_extra_libs="no"
fi
{ echo "$as_me:29704: result: $kde_use_extra_libs" >&5
echo "${ECHO_T}$kde_use_extra_libs" >&6; }
{ echo "$as_me:29710: checking for libz" >&5
echo $ECHO_N "checking for libz... $ECHO_C" >&6; }
if test "${ac_cv_lib_z+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -lz $LIBSOCKET"
kde_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include<zlib.h>
int
main ()
{
char buf[42];
gzFile f = (gzFile) 0;
/* this would segfault.. but we only link, don't run */
(void) gzgets(f, buf, sizeof(buf));
return (zlibVersion() == ZLIB_VERSION);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29750: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29756: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "ac_cv_lib_z='-lz'"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "ac_cv_lib_z=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS="$kde_save_LIBS"
CFLAGS="$kde_save_CFLAGS"
fi
if test ! "$ac_cv_lib_z" = no; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBZ 1
_ACEOF
LIBZ="$ac_cv_lib_z"
{ echo "$as_me:29783: result: $ac_cv_lib_z" >&5
echo "${ECHO_T}$ac_cv_lib_z" >&6; }
else
{ { echo "$as_me:29786: error: not found.
Possibly configure picks up an outdated version
installed by XFree86. Remove it from your system.
Check your installation and look into config.log" >&5
echo "$as_me: error: not found.
Possibly configure picks up an outdated version
installed by XFree86. Remove it from your system.
Check your installation and look into config.log" >&2;}
{ (exit 1); exit 1; }; }
LIBZ=""
fi
{ echo "$as_me:29804: checking for libpng" >&5
echo $ECHO_N "checking for libpng... $ECHO_C" >&6; }
if test "${ac_cv_lib_png+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_save_LIBS="$LIBS"
if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then
LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm -lX11 $LIBSOCKET"
else
LIBS="$LIBS $all_libraries $USER_LDFLAGS -lpng $LIBZ -lm"
fi
kde_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include<png.h>
int
main ()
{
png_structp png_ptr = png_create_read_struct( /* image ptr */
PNG_LIBPNG_VER_STRING, 0, 0, 0 );
return( png_ptr != 0 );
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29846: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29852: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "ac_cv_lib_png='-lpng $LIBZ -lm'"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "ac_cv_lib_png=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS="$kde_save_LIBS"
CFLAGS="$kde_save_CFLAGS"
fi
if eval "test ! \"`echo $ac_cv_lib_png`\" = no"; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBPNG 1
_ACEOF
LIBPNG="$ac_cv_lib_png"
{ echo "$as_me:29881: result: $ac_cv_lib_png" >&5
echo "${ECHO_T}$ac_cv_lib_png" >&6; }
else
{ echo "$as_me:29884: result: no" >&5
echo "${ECHO_T}no" >&6; }
LIBPNG=""
fi
{ echo "$as_me:29892: checking for libjpeg6b" >&5
echo $ECHO_N "checking for libjpeg6b... $ECHO_C" >&6; }
if test "${ac_cv_lib_jpeg_6b+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -ljpeg6b -lm"
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __cplusplus
extern "C" {
#endif
void jpeg_CreateDecompress();
#ifdef __cplusplus
}
#endif
int
main ()
{
jpeg_CreateDecompress();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:29931: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:29937: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "ac_cv_lib_jpeg_6b=-ljpeg6b"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "ac_cv_lib_jpeg_6b=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"
fi
if eval "test ! \"`echo $ac_cv_lib_jpeg_6b`\" = no"; then
LIBJPEG="$ac_cv_lib_jpeg_6b"
{ echo "$as_me:29961: result: $ac_cv_lib_jpeg_6b" >&5
echo "${ECHO_T}$ac_cv_lib_jpeg_6b" >&6; }
else
{ echo "$as_me:29964: result: no" >&5
echo "${ECHO_T}no" >&6; }
{ echo "$as_me:29967: checking for libjpeg" >&5
echo $ECHO_N "checking for libjpeg... $ECHO_C" >&6; }
if test "${ac_cv_lib_jpeg_normal+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS -ljpeg -lm"
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $all_includes $USER_INCLUDES"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#ifdef __cplusplus
extern "C" {
#endif
void jpeg_CreateDecompress();
#ifdef __cplusplus
}
#endif
int
main ()
{
jpeg_CreateDecompress();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:30006: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:30012: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "ac_cv_lib_jpeg_normal=-ljpeg"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "ac_cv_lib_jpeg_normal=no"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"
fi
if eval "test ! \"`echo $ac_cv_lib_jpeg_normal`\" = no"; then
LIBJPEG="$ac_cv_lib_jpeg_normal"
{ echo "$as_me:30036: result: $ac_cv_lib_jpeg_normal" >&5
echo "${ECHO_T}$ac_cv_lib_jpeg_normal" >&6; }
else
{ echo "$as_me:30039: result: no" >&5
echo "${ECHO_T}no" >&6; }
LIBJPEG=
fi
fi
jpeg_incdirs="$includedir /usr/include /usr/local/include $kde_extra_includes"
jpeg_incdir=NO
for i in $jpeg_incdirs;
do
for j in jpeglib.h;
do
echo "configure: 30060: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
jpeg_incdir=$i
break 2
fi
done
done
test "x$jpeg_incdir" = xNO && jpeg_incdir=
if test -n "$jpeg_incdir" && test -n "$LIBJPEG" ; then
cat >>confdefs.h <<_ACEOF
#define HAVE_LIBJPEG 1
_ACEOF
else
if test -n "$jpeg_incdir" || test -n "$LIBJPEG" ; then
{ echo "$as_me:30079: WARNING:
There is an installation error in jpeg support. You seem to have only one
of either the headers _or_ the libraries installed. You may need to either
provide correct --with-extra-... options, or the development package of
libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
Disabling JPEG support.
" >&5
echo "$as_me: WARNING:
There is an installation error in jpeg support. You seem to have only one
of either the headers _or_ the libraries installed. You may need to either
provide correct --with-extra-... options, or the development package of
libjpeg6b. You can get a source package of libjpeg from http://www.ijg.org/
Disabling JPEG support.
" >&2;}
else
{ echo "$as_me:30094: WARNING: libjpeg not found. disable JPEG support." >&5
echo "$as_me: WARNING: libjpeg not found. disable JPEG support." >&2;}
fi
jpeg_incdir=
LIBJPEG=
fi
{ echo "$as_me:30107: checking for perl" >&5
echo $ECHO_N "checking for perl... $ECHO_C" >&6; }
if test -n "$PERL"; then
kde_cv_path="$PERL";
else
kde_cache=`echo perl | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$bindir $exec_prefix/bin $prefix/bin $dirs"
else dirs="$dirs $bindir $exec_prefix/bin $prefix/bin"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/perl"; then
if test -n ""
then
evalstr="$dir/perl 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/perl"
break
fi
else
kde_cv_path="$dir/perl"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:30157: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:30160: error: No Perl found in your $PATH.
We need perl to generate some code." >&5
echo "$as_me: error: No Perl found in your $PATH.
We need perl to generate some code." >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:30167: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
PERL=$kde_cv_path
fi
# Check whether --enable-mt was given.
if test "${enable_mt+set}" = set; then
enableval=$enable_mt; kde_use_qt_mt=$enableval
else
if test $kde_qtver = 3; then
kde_use_qt_mt=yes
else
kde_use_qt_mt=no
fi
fi
USING_QT_MT=""
KDE_MT_LDFLAGS=
KDE_MT_LIBS=
if test "x$kde_use_qt_mt" = "xyes"; then
if test -z "$LIBPTHREAD"; then
if test -z "$USE_THREADS"; then
kde_check_threading_default=no
else
kde_check_threading_default=yes
fi
else
kde_check_threading_default=yes
fi
# Check whether --enable-threading was given.
if test "${enable_threading+set}" = set; then
enableval=$enable_threading; kde_use_threading=$enableval
else
kde_use_threading=$kde_check_threading_default
fi
if test "x$kde_use_threading" = "xyes"; then
cat >>confdefs.h <<\_ACEOF
#define HAVE_LIBPTHREAD 1
_ACEOF
fi
if test "x$kde_use_threading" = "xyes"; then
CPPFLAGS="$USE_THREADS -DQT_THREAD_SUPPORT $CPPFLAGS"
KDE_MT_LDFLAGS="$USE_THREADS"
KDE_MT_LIBS="$LIBPTHREAD"
else
kde_use_qt_mt=no
fi
fi
kde_qt_was_given=yes
if test -z "$LIBQT_GLOB"; then
if test "x$kde_use_qt_emb" = "xyes"; then
LIBQT_GLOB="libqte.*"
else
LIBQT_GLOB="libqt.*"
fi
fi
if test "x$kde_use_qt_emb" = "xyes"; then
qtlib="qte"
else
qtlib="qt"
fi
kde_int_qt="-l$qtlib"
if test -z "$LIBQPE"; then
if test "x$kde_use_qt_emb" = "xyes"; then
if test "x$kde_use_qt_emb_palm" = "xyes"; then
LIB_QPE="-lqpe"
else
LIB_QPE=""
fi
else
LIB_QPE=""
fi
fi
if test "x$kde_use_qt_mt" = "xyes"; then
LIBQT="-l$qtlib-mt"
kde_int_qt="-l$qtlib-mt"
LIBQT_GLOB="lib$qtlib-mt.*"
USING_QT_MT="using -mt"
else
LIBQT="-l$qtlib"
fi
if test $kde_qtver != 1; then
LIBQT="$LIBQT $LIBPNG $LIBJPEG"
fi
if test $kde_qtver = 3; then
LIBQT="$LIBQT $LIBDL"
fi
{ echo "$as_me:30293: checking for Qt" >&5
echo $ECHO_N "checking for Qt... $ECHO_C" >&6; }
if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then
LIBQT="$LIBQT $X_PRE_LIBS -lXext -lX11 $LIBSM $LIBSOCKET"
fi
ac_qt_includes=NO ac_qt_libraries=NO ac_qt_bindir=NO
qt_libraries=""
qt_includes=""
# Check whether --with-qt-dir was given.
if test "${with_qt_dir+set}" = set; then
withval=$with_qt_dir; ac_qt_includes="$withval"/include
ac_qt_libraries="$withval"/lib${kdelibsuff}
ac_qt_bindir="$withval"/bin
fi
# Check whether --with-qt-includes was given.
if test "${with_qt_includes+set}" = set; then
withval=$with_qt_includes;
ac_qt_includes="$withval"
fi
kde_qt_libs_given=no
# Check whether --with-qt-libraries was given.
if test "${with_qt_libraries+set}" = set; then
withval=$with_qt_libraries; ac_qt_libraries="$withval"
kde_qt_libs_given=yes
fi
if test "${ac_cv_have_qt+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
#try to guess Qt locations
qt_incdirs=""
for dir in $kde_qt_dirs; do
qt_incdirs="$qt_incdirs $dir/include $dir"
done
qt_incdirs="$QTINC $qt_incdirs /usr/local/qt/include /usr/include/qt /usr/include /usr/X11R6/include/X11/qt /usr/X11R6/include/qt /usr/X11R6/include/qt2 /usr/include/qt3 $x_includes"
if test ! "$ac_qt_includes" = "NO"; then
qt_incdirs="$ac_qt_includes $qt_incdirs"
fi
if test "$kde_qtver" != "1"; then
kde_qt_header=qstyle.h
else
kde_qt_header=qglobal.h
fi
qt_incdir=NO
for i in $qt_incdirs;
do
for j in $kde_qt_header;
do
echo "configure: 30358: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
qt_incdir=$i
break 2
fi
done
done
ac_qt_includes="$qt_incdir"
qt_libdirs=""
for dir in $kde_qt_dirs; do
qt_libdirs="$qt_libdirs $dir/lib${kdelibsuff} $dir"
done
qt_libdirs="$QTLIB $qt_libdirs /usr/X11R6/lib /usr/lib /usr/local/qt/lib $x_libraries"
if test ! "$ac_qt_libraries" = "NO"; then
qt_libdir=$ac_qt_libraries
else
qt_libdirs="$ac_qt_libraries $qt_libdirs"
# if the Qt was given, the chance is too big that libqt.* doesn't exist
qt_libdir=NONE
for dir in $qt_libdirs; do
try="ls -1 $dir/${LIBQT_GLOB}"
if test -n "`$try 2> /dev/null`"; then qt_libdir=$dir; break; else echo "tried $dir" >&5 ; fi
done
fi
for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do
if test -e "$a"; then
LIBQT="$LIBQT ${kde_int_qt}_incremental"
break
fi
done
ac_qt_libraries="$qt_libdir"
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
ac_cxxflags_safe="$CXXFLAGS"
ac_ldflags_safe="$LDFLAGS"
ac_libs_safe="$LIBS"
CXXFLAGS="$CXXFLAGS -I$qt_incdir $all_includes"
LDFLAGS="$LDFLAGS -L$qt_libdir $all_libraries $USER_LDFLAGS $KDE_MT_LDFLAGS"
LIBS="$LIBS $LIBQT $KDE_MT_LIBS"
cat > conftest.$ac_ext <<EOF
#include "confdefs.h"
#include <qglobal.h>
#include <qapplication.h>
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
#include <qevent.h>
#include <qstring.h>
#include <qstyle.h>
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
#if QT_VERSION < 210
#error 1
#endif
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
#include <qcursor.h>
#include <qstylefactory.h>
#include <private/qucomextra_p.h>
EOF
fi
echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
cat >> conftest.$ac_ext <<EOF
#error 1
#endif
int main() {
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
QStringList *t = new QStringList();
Q_UNUSED(t);
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
QString s;
s.setLatin1("Elvis is alive", 14);
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
(void)QStyleFactory::create(QString::null);
QCursor c(Qt::WhatsThisCursor);
EOF
fi
cat >> conftest.$ac_ext <<EOF
return 0;
}
EOF
if { (eval echo "$as_me:30475: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:30478: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest; then
rm -f conftest*
else
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
ac_qt_libraries="NO"
fi
rm -f conftest*
CXXFLAGS="$ac_cxxflags_safe"
LDFLAGS="$ac_ldflags_safe"
LIBS="$ac_libs_safe"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
if test "$ac_qt_includes" = NO || test "$ac_qt_libraries" = NO; then
ac_cv_have_qt="have_qt=no"
ac_qt_notfound=""
missing_qt_mt=""
if test "$ac_qt_includes" = NO; then
if test "$ac_qt_libraries" = NO; then
ac_qt_notfound="(headers and libraries)";
else
ac_qt_notfound="(headers)";
fi
else
if test "x$kde_use_qt_mt" = "xyes"; then
missing_qt_mt="
Make sure that you have compiled Qt with thread support!"
ac_qt_notfound="(library $qtlib-mt)";
else
ac_qt_notfound="(library $qtlib)";
fi
fi
{ { echo "$as_me:30517: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
For more details about this problem, look at the end of config.log.$missing_qt_mt" >&5
echo "$as_me: error: Qt ($kde_qt_minversion) $ac_qt_notfound not found. Please check your installation!
For more details about this problem, look at the end of config.log.$missing_qt_mt" >&2;}
{ (exit 1); exit 1; }; }
else
have_qt="yes"
fi
fi
eval "$ac_cv_have_qt"
if test "$have_qt" != yes; then
{ echo "$as_me:30532: result: $have_qt" >&5
echo "${ECHO_T}$have_qt" >&6; };
else
ac_cv_have_qt="have_qt=yes \
ac_qt_includes=$ac_qt_includes ac_qt_libraries=$ac_qt_libraries"
{ echo "$as_me:30537: result: libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&5
echo "${ECHO_T}libraries $ac_qt_libraries, headers $ac_qt_includes $USING_QT_MT" >&6; }
qt_libraries="$ac_qt_libraries"
qt_includes="$ac_qt_includes"
fi
if test ! "$kde_qt_libs_given" = "yes" && test ! "$kde_qtver" = 3; then
{ echo "$as_me:30547: checking if Qt compiles without flags" >&5
echo $ECHO_N "checking if Qt compiles without flags... $ECHO_C" >&6; }
if test "${kde_cv_qt_direct+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
ac_LD_LIBRARY_PATH_safe=$LD_LIBRARY_PATH
ac_LIBRARY_PATH="$LIBRARY_PATH"
ac_cxxflags_safe="$CXXFLAGS"
ac_ldflags_safe="$LDFLAGS"
ac_libs_safe="$LIBS"
CXXFLAGS="$CXXFLAGS -I$qt_includes"
LDFLAGS="$LDFLAGS $X_LDFLAGS"
if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then
LIBS="$LIBQT -lXext -lX11 $LIBSOCKET"
else
LIBS="$LIBQT $LIBSOCKET"
fi
LD_LIBRARY_PATH=
export LD_LIBRARY_PATH
LIBRARY_PATH=
export LIBRARY_PATH
cat > conftest.$ac_ext <<EOF
#include "confdefs.h"
#include <qglobal.h>
#include <qapplication.h>
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
#include <qevent.h>
#include <qstring.h>
#include <qstyle.h>
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
#if QT_VERSION < 210
#error 1
#endif
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
#include <qcursor.h>
#include <qstylefactory.h>
#include <private/qucomextra_p.h>
EOF
fi
echo "#if ! ($kde_qt_verstring)" >> conftest.$ac_ext
cat >> conftest.$ac_ext <<EOF
#error 1
#endif
int main() {
EOF
if test "$kde_qtver" = "2"; then
cat >> conftest.$ac_ext <<EOF
QStringList *t = new QStringList();
Q_UNUSED(t);
EOF
if test $kde_qtsubver -gt 0; then
cat >> conftest.$ac_ext <<EOF
QString s;
s.setLatin1("Elvis is alive", 14);
EOF
fi
fi
if test "$kde_qtver" = "3"; then
cat >> conftest.$ac_ext <<EOF
(void)QStyleFactory::create(QString::null);
QCursor c(Qt::WhatsThisCursor);
EOF
fi
cat >> conftest.$ac_ext <<EOF
return 0;
}
EOF
if { (eval echo "$as_me:30643: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:30646: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest; then
kde_cv_qt_direct="yes"
else
kde_cv_qt_direct="no"
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
fi
rm -f conftest*
CXXFLAGS="$ac_cxxflags_safe"
LDFLAGS="$ac_ldflags_safe"
LIBS="$ac_libs_safe"
LD_LIBRARY_PATH="$ac_LD_LIBRARY_PATH_safe"
export LD_LIBRARY_PATH
LIBRARY_PATH="$ac_LIBRARY_PATH"
export LIBRARY_PATH
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
if test "$kde_cv_qt_direct" = "yes"; then
{ echo "$as_me:30675: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
qt_libraries=
else
{ echo "$as_me:30679: result: no" >&5
echo "${ECHO_T}no" >&6; }
fi
fi
if test "$qt_includes" = "$x_includes" || test -z "$qt_includes"; then
QT_INCLUDES=""
else
QT_INCLUDES="-I$qt_includes"
all_includes="$QT_INCLUDES $all_includes"
fi
if test "$qt_libraries" = "$x_libraries" || test -z "$qt_libraries"; then
QT_LDFLAGS=""
else
QT_LDFLAGS="-L$qt_libraries"
all_libraries="$QT_LDFLAGS $all_libraries"
fi
test -z "$KDE_MT_LDFLAGS" || all_libraries="$all_libraries $KDE_MT_LDFLAGS"
qt_bindirs=""
for dir in $kde_qt_dirs; do
qt_bindirs="$qt_bindirs $dir/bin $dir/src/moc"
done
qt_bindirs="$qt_bindirs /usr/bin /usr/X11R6/bin /usr/local/qt/bin"
if test ! "$ac_qt_bindir" = "NO"; then
qt_bindirs="$ac_qt_bindir $qt_bindirs"
fi
{ echo "$as_me:30718: checking for moc" >&5
echo $ECHO_N "checking for moc... $ECHO_C" >&6; }
if test -n "$MOC"; then
kde_cv_path="$MOC";
else
kde_cache=`echo moc | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$qt_bindirs $dirs"
else dirs="$dirs $qt_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/moc"; then
if test -n ""
then
evalstr="$dir/moc 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/moc"
break
fi
else
kde_cv_path="$dir/moc"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:30768: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:30771: error: No Qt meta object compiler (moc) found!
Please check whether you installed Qt correctly.
You need to have a running moc binary.
configure tried to run $ac_cv_path_moc and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable MOC to the right one before running
configure.
" >&5
echo "$as_me: error: No Qt meta object compiler (moc) found!
Please check whether you installed Qt correctly.
You need to have a running moc binary.
configure tried to run $ac_cv_path_moc and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable MOC to the right one before running
configure.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:30790: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
MOC=$kde_cv_path
fi
if test -z "$UIC_NOT_NEEDED"; then
{ echo "$as_me:30798: checking for uic" >&5
echo $ECHO_N "checking for uic... $ECHO_C" >&6; }
if test -n "$UIC_PATH"; then
kde_cv_path="$UIC_PATH";
else
kde_cache=`echo uic | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$qt_bindirs $dirs"
else dirs="$dirs $qt_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/uic"; then
if test -n ""
then
evalstr="$dir/uic 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/uic"
break
fi
else
kde_cv_path="$dir/uic"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:30848: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
UIC_PATH=""
else
{ echo "$as_me:30852: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
UIC_PATH=$kde_cv_path
fi
if test -z "$UIC_PATH" ; then
{ echo "$as_me:30860: WARNING: No Qt ui compiler (uic) found!
Please check whether you installed Qt correctly.
You need to have a running uic binary.
configure tried to run $ac_cv_path_uic and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable UIC to the right one before running
configure.
" >&5
echo "$as_me: WARNING: No Qt ui compiler (uic) found!
Please check whether you installed Qt correctly.
You need to have a running uic binary.
configure tried to run $ac_cv_path_uic and the test didn't
succeed. If configure shouldn't have tried this one, set
the environment variable UIC to the right one before running
configure.
" >&2;}
exit 1
else
UIC=$UIC_PATH
if test $kde_qtver = 3; then
{ echo "$as_me:30883: checking whether uic supports -L " >&5
echo $ECHO_N "checking whether uic supports -L ... $ECHO_C" >&6; }
kde_cache=`echo L | sed 'y% .=/+-%____p_%'`
if { as_var=kde_cv_prog_uic_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.ui <<EOT
<!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
EOT
ac_uic_testrun="$UIC_PATH -L /nonexistent conftest.ui >/dev/null"
if { (eval echo "$as_me:30894: \"$ac_uic_testrun\"") >&5
(eval $ac_uic_testrun) 2>&5
ac_status=$?
echo "$as_me:30897: \$? = $ac_status" >&5
(exit $ac_status); }; then
eval "kde_cv_prog_uic_$kde_cache=yes"
else
eval "kde_cv_prog_uic_$kde_cache=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
{ echo "$as_me:30909: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
ac_uic_supports_libpath=yes
else
{ echo "$as_me:30914: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
ac_uic_supports_libpath=no
fi
{ echo "$as_me:30921: checking whether uic supports -nounload " >&5
echo $ECHO_N "checking whether uic supports -nounload ... $ECHO_C" >&6; }
kde_cache=`echo nounload | sed 'y% .=/+-%____p_%'`
if { as_var=kde_cv_prog_uic_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat >conftest.ui <<EOT
<!DOCTYPE UI><UI version="3" stdsetdef="1"></UI>
EOT
ac_uic_testrun="$UIC_PATH -nounload conftest.ui >/dev/null"
if { (eval echo "$as_me:30932: \"$ac_uic_testrun\"") >&5
(eval $ac_uic_testrun) 2>&5
ac_status=$?
echo "$as_me:30935: \$? = $ac_status" >&5
(exit $ac_status); }; then
eval "kde_cv_prog_uic_$kde_cache=yes"
else
eval "kde_cv_prog_uic_$kde_cache=no"
fi
rm -f conftest*
fi
if eval "test \"`echo '$kde_cv_prog_uic_'$kde_cache`\" = yes"; then
{ echo "$as_me:30947: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
:
ac_uic_supports_nounload=yes
else
{ echo "$as_me:30952: result: no" >&5
echo "${ECHO_T}no" >&6; }
:
ac_uic_supports_nounload=no
fi
if test x$ac_uic_supports_libpath = xyes; then
UIC="$UIC -L \$(kde_widgetdir)"
fi
if test x$ac_uic_supports_nounload = xyes; then
UIC="$UIC -nounload"
fi
fi
fi
else
UIC="echo uic not available: "
fi
UIC_TR="i18n"
if test $kde_qtver = 3; then
UIC_TR="tr2i18n"
fi
if test -n "$LIBJPEG"; then
{ echo "$as_me:30984: checking if Qt needs $LIBJPEG" >&5
echo $ECHO_N "checking if Qt needs $LIBJPEG... $ECHO_C" >&6; }
if test "${kde_cv_qt_jpeg+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
ac_save_LIBS="$LIBS"
LIBS="$all_libraries $USER_LDFLAGS $LIBQT"
LIBS=`echo $LIBS | sed "s/$LIBJPEG//"`
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS="$CXXFLAGS $all_includes $USER_INCLUDES"
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <qapplication.h>
int
main ()
{
int argc;
char** argv;
QApplication app(argc, argv);
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:31029: $ac_try_echo\"") >&5
(eval "$ac_link") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:31035: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_cxx_werror_flag" ||
test ! -s conftest.err
} && test -s conftest$ac_exeext &&
$as_test_x conftest$ac_exeext; then
eval "kde_cv_qt_jpeg=no"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
eval "kde_cv_qt_jpeg=yes"
fi
rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \
conftest$ac_exeext conftest.$ac_ext
LIBS="$ac_save_LIBS"
CXXFLAGS="$ac_save_CXXFLAGS"
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
fi
fi
if eval "test ! \"`echo $kde_cv_qt_jpeg`\" = no"; then
{ echo "$as_me:31065: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
LIBJPEG_QT='$(LIBJPEG)'
else
{ echo "$as_me:31069: result: no" >&5
echo "${ECHO_T}no" >&6; }
LIBJPEG_QT=
fi
if test "x$kde_use_qt_emb" != "xyes" && test "x$kde_use_qt_mac" != "xyes"; then
LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG) -lXext $(LIB_X11) $(LIBSM)'
else
LIB_QT="$kde_int_qt $LIBJPEG_QT "'$(LIBZ) $(LIBPNG)'
fi
test -z "$KDE_MT_LIBS" || LIB_QT="$LIB_QT $KDE_MT_LIBS"
for a in $qt_libdir/lib`echo ${kde_int_qt} | sed 's,^-l,,'`_incremental.*; do
if test -e "$a"; then
LIB_QT="$LIB_QT ${kde_int_qt}_incremental"
break
fi
done
{ echo "$as_me:31101: checking for rpath" >&5
echo $ECHO_N "checking for rpath... $ECHO_C" >&6; }
# Check whether --enable-rpath was given.
if test "${enable_rpath+set}" = set; then
enableval=$enable_rpath; USE_RPATH=$enableval
else
USE_RPATH=yes
fi
if test -z "$KDE_RPATH" && test "$USE_RPATH" = "yes"; then
KDE_RPATH="-R \$(libdir)"
if test "$kde_libraries" != "$libdir"; then
KDE_RPATH="$KDE_RPATH -R \$(kde_libraries)"
fi
if test -n "$qt_libraries"; then
KDE_RPATH="$KDE_RPATH -R \$(qt_libraries)"
fi
if test -n "$X_LDFLAGS"; then
X_RPATH="-R \$(x_libraries)"
KDE_RPATH="$KDE_RPATH $X_RPATH"
fi
if test -n "$KDE_EXTRA_RPATH"; then
KDE_RPATH="$KDE_RPATH \$(KDE_EXTRA_RPATH)"
fi
fi
{ echo "$as_me:31133: result: $USE_RPATH" >&5
echo "${ECHO_T}$USE_RPATH" >&6; }
{ echo "$as_me:31136: checking for KDE" >&5
echo $ECHO_N "checking for KDE... $ECHO_C" >&6; }
if test "${prefix}" != NONE; then
kde_includes=${includedir}
savex=$exec_prefix
test "x$exec_prefix" = xNONE && exec_prefix=$prefix
tmp=$includedir
while ac_kde_includes=`eval echo "$tmp"`; test "x$ac_kde_includes" != "x$tmp"; do tmp=$ac_kde_includes; done
exec_prefix=$savex
kde_libraries=${libdir}
savex=$exec_prefix
test "x$exec_prefix" = xNONE && exec_prefix=$prefix
tmp=$libdir
while ac_kde_libraries=`eval echo "$tmp"`; test "x$ac_kde_libraries" != "x$tmp"; do tmp=$ac_kde_libraries; done
exec_prefix=$savex
else
ac_kde_includes=
ac_kde_libraries=
kde_libraries=""
kde_includes=""
fi
if test "${ac_cv_have_kde+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
#try to guess kde locations
if test "$kde_qtver" = 1; then
kde_check_header="ksock.h"
kde_check_lib="libkdecore.la"
else
kde_check_header="ksharedptr.h"
kde_check_lib="libkio.la"
fi
if test -z ""; then
kde_incdirs="$kde_libs_prefix/include /usr/lib/kde/include /usr/local/kde/include /usr/local/include /usr/kde/include /usr/include/kde /usr/include /opt/kde3/include /opt/kde/include $x_includes $qt_includes"
test -n "$KDEDIR" && kde_incdirs="$KDEDIR/include $KDEDIR/include/kde $KDEDIR $kde_incdirs"
kde_incdirs="$ac_kde_includes $kde_incdirs"
kde_incdir=NO
for i in $kde_incdirs;
do
for j in $kde_check_header;
do
echo "configure: 31189: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_incdir=$i
break 2
fi
done
done
ac_kde_includes="$kde_incdir"
if test -n "$ac_kde_includes" && test ! -r "$ac_kde_includes/$kde_check_header"; then
{ { echo "$as_me:31201: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!" >&5
echo "$as_me: error:
in the prefix, you've chosen, are no KDE headers installed. This will fail.
So, check this please and use another prefix!" >&2;}
{ (exit 1); exit 1; }; }
fi
kde_libdirs="$kde_libs_prefix/lib${kdelibsuff} /usr/lib/kde/lib${kdelibsuff} /usr/local/kde/lib${kdelibsuff} /usr/kde/lib${kdelibsuff} /usr/lib${kdelibsuff}/kde /usr/lib${kdelibsuff}/kde3 /usr/lib${kdelibsuff} /usr/X11R6/lib${kdelibsuff} /usr/local/lib${kdelibsuff} /opt/kde3/lib${kdelibsuff} /opt/kde/lib${kdelibsuff} /usr/X11R6/kde/lib${kdelibsuff}"
test -n "$KDEDIR" && kde_libdirs="$KDEDIR/lib${kdelibsuff} $KDEDIR $kde_libdirs"
kde_libdirs="$ac_kde_libraries $libdir $kde_libdirs"
kde_libdir=NO
for i in $kde_libdirs;
do
for j in $kde_check_lib;
do
echo "configure: 31219: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_libdir=$i
break 2
fi
done
done
ac_kde_libraries="$kde_libdir"
kde_widgetdir=NO
kde_widgetdir=NO
for i in $kde_libdirs;
do
for j in "kde3/plugins/designer/kdewidgets.la";
do
echo "configure: 31237: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
kde_widgetdir=$i
break 2
fi
done
done
if test -n "$ac_kde_libraries" && test ! -r "$ac_kde_libraries/$kde_check_lib"; then
{ { echo "$as_me:31248: error:
in the prefix, you've chosen, are no KDE libraries installed. This will fail.
So, check this please and use another prefix!" >&5
echo "$as_me: error:
in the prefix, you've chosen, are no KDE libraries installed. This will fail.
So, check this please and use another prefix!" >&2;}
{ (exit 1); exit 1; }; }
fi
if test -n "$kde_widgetdir" && test ! -r "$kde_widgetdir/kde3/plugins/designer/kdewidgets.la"; then
{ { echo "$as_me:31258: error:
I can't find the designer plugins. These are required and should have been installed
by kdelibs" >&5
echo "$as_me: error:
I can't find the designer plugins. These are required and should have been installed
by kdelibs" >&2;}
{ (exit 1); exit 1; }; }
fi
if test -n "$kde_widgetdir"; then
kde_widgetdir="$kde_widgetdir/kde3/plugins/designer"
fi
if test "$ac_kde_includes" = NO || test "$ac_kde_libraries" = NO || test "$kde_widgetdir" = NO; then
ac_cv_have_kde="have_kde=no"
else
ac_cv_have_kde="have_kde=yes \
ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
fi
else
ac_cv_have_kde="have_kde=no"
fi
fi
eval "$ac_cv_have_kde"
if test "$have_kde" != "yes"; then
if test "${prefix}" = NONE; then
ac_kde_prefix="$ac_default_prefix"
else
ac_kde_prefix="$prefix"
fi
if test "$exec_prefix" = NONE; then
ac_kde_exec_prefix="$ac_kde_prefix"
{ echo "$as_me:31296: result: will be installed in $ac_kde_prefix" >&5
echo "${ECHO_T}will be installed in $ac_kde_prefix" >&6; }
else
ac_kde_exec_prefix="$exec_prefix"
{ echo "$as_me:31300: result: will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&5
echo "${ECHO_T}will be installed in $ac_kde_prefix and $ac_kde_exec_prefix" >&6; }
fi
kde_libraries="${libdir}"
kde_includes="${includedir}"
else
ac_cv_have_kde="have_kde=yes \
ac_kde_includes=$ac_kde_includes ac_kde_libraries=$ac_kde_libraries"
{ echo "$as_me:31310: result: libraries $ac_kde_libraries, headers $ac_kde_includes" >&5
echo "${ECHO_T}libraries $ac_kde_libraries, headers $ac_kde_includes" >&6; }
kde_libraries="$ac_kde_libraries"
kde_includes="$ac_kde_includes"
fi
if test "$kde_includes" = "$x_includes" || test "$kde_includes" = "$qt_includes" || test "$kde_includes" = "/usr/include"; then
KDE_INCLUDES=""
else
KDE_INCLUDES="-I$kde_includes"
all_includes="$KDE_INCLUDES $all_includes"
fi
KDE_DEFAULT_CXXFLAGS="-DQT_CLEAN_NAMESPACE -DQT_NO_ASCII_CAST -DQT_NO_STL -DQT_NO_COMPAT -DQT_NO_TRANSLATION"
KDE_LDFLAGS="-L$kde_libraries"
if test ! "$kde_libraries" = "$x_libraries" && test ! "$kde_libraries" = "$qt_libraries" ; then
all_libraries="$KDE_LDFLAGS $all_libraries"
fi
all_libraries="$all_libraries $USER_LDFLAGS"
all_includes="$all_includes $USER_INCLUDES"
if test -z ""; then
if test x$ac_uic_supports_libpath = xyes; then
{ echo "$as_me:31349: checking if UIC has KDE plugins available" >&5
echo $ECHO_N "checking if UIC has KDE plugins available... $ECHO_C" >&6; }
if test "${kde_cv_uic_plugins+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat > actest.ui << EOF
<!DOCTYPE UI><UI version="3.0" stdsetdef="1">
<class>NewConnectionDialog</class>
<widget class="QDialog">
<widget class="KLineEdit">
<property name="name">
<cstring>testInput</cstring>
</property>
</widget>
</widget>
</UI>
EOF
kde_cv_uic_plugins=no
kde_line="$UIC_PATH -L $kde_widgetdir"
if test x$ac_uic_supports_nounload = xyes; then
kde_line="$kde_line -nounload"
fi
kde_line="$kde_line -impl actest.h actest.ui > actest.cpp"
if { (eval echo "$as_me:31376: \"$kde_line\"") >&5
(eval $kde_line) 2>&5
ac_status=$?
echo "$as_me:31379: \$? = $ac_status" >&5
(exit $ac_status); }; then
# if you're trying to debug this check and think it's incorrect,
# better check your installation. The check _is_ correct - your
# installation is not.
if test -f actest.cpp && grep klineedit actest.cpp > /dev/null; then
kde_cv_uic_plugins=yes
fi
fi
rm -f actest.ui actest.cpp
fi
{ echo "$as_me:31393: result: $kde_cv_uic_plugins" >&5
echo "${ECHO_T}$kde_cv_uic_plugins" >&6; }
if test "$kde_cv_uic_plugins" != yes; then
{ { echo "$as_me:31396: error:
you need to install kdelibs first.
If you did install kdelibs, then the Qt version that is picked up by
this configure is not the same version you used to compile kdelibs.
The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
_same Qt version_, compiled with the _same compiler_ and the same Qt
configuration settings.
" >&5
echo "$as_me: error:
you need to install kdelibs first.
If you did install kdelibs, then the Qt version that is picked up by
this configure is not the same version you used to compile kdelibs.
The Qt Plugin installed by kdelibs is *ONLY* loadable if it is the
_same Qt version_, compiled with the _same compiler_ and the same Qt
configuration settings.
" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
fi
ac_kde_libraries="$kde_libdir"
# Check whether --enable-path-check was given.
if test "${enable_path_check+set}" = set; then
enableval=$enable_path_check;
if test "$enableval" = "no";
then ac_use_path_checking="default"
else ac_use_path_checking=""
fi
else
if test "$kde_qtver" = 1;
then ac_use_path_checking=""
else ac_use_path_checking="default"
fi
fi
{ echo "$as_me:31448: checking for KDE paths" >&5
echo $ECHO_N "checking for KDE paths... $ECHO_C" >&6; }
kde_result=""
kde_cached_paths=yes
if test "${kde_cv_all_paths+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
if test "$ac_use_path_checking" = "default"; then
if test -z "$kde_htmldir"; then
kde_htmldir='\${datadir}/doc/HTML'
fi
if test -z "$kde_appsdir"; then
kde_appsdir='\${datadir}/applnk'
fi
if test -z "$kde_icondir"; then
kde_icondir='\${datadir}/icons'
fi
if test -z "$kde_sounddir"; then
kde_sounddir='\${datadir}/sounds'
fi
if test -z "$kde_datadir"; then
kde_datadir='\${datadir}/apps'
fi
if test -z "$kde_locale"; then
kde_locale='\${datadir}/locale'
fi
if test -z "$kde_cgidir"; then
kde_cgidir='\${exec_prefix}/cgi-bin'
fi
if test -z "$kde_confdir"; then
kde_confdir='\${datadir}/config'
fi
if test -z "$kde_kcfgdir"; then
kde_kcfgdir='\${datadir}/config.kcfg'
fi
if test -z "$kde_mimedir"; then
kde_mimedir='\${datadir}/mimelnk'
fi
if test -z "$kde_toolbardir"; then
kde_toolbardir='\${datadir}/toolbar'
fi
if test -z "$kde_wallpaperdir"; then
kde_wallpaperdir='\${datadir}/wallpapers'
fi
if test -z "$kde_templatesdir"; then
kde_templatesdir='\${datadir}/templates'
fi
if test -z "$kde_bindir"; then
kde_bindir='\${exec_prefix}/bin'
fi
if test -z "$kde_servicesdir"; then
kde_servicesdir='\${datadir}/services'
fi
if test -z "$kde_servicetypesdir"; then
kde_servicetypesdir='\${datadir}/servicetypes'
fi
if test -z "$kde_moduledir"; then
if test "$kde_qtver" = "2"; then
kde_moduledir='\${libdir}/kde2'
else
kde_moduledir='\${libdir}/kde3'
fi
fi
if test -z "$kde_styledir"; then
kde_styledir='\${libdir}/kde3/plugins/styles'
fi
if test -z "$kde_widgetdir"; then
kde_widgetdir='\${libdir}/kde3/plugins/designer'
fi
if test -z "$xdg_appsdir"; then
xdg_appsdir='\${datadir}/applications/kde'
fi
if test -z "$xdg_menudir"; then
xdg_menudir='\${sysconfdir}/xdg/menus'
fi
if test -z "$xdg_directorydir"; then
xdg_directorydir='\${datadir}/desktop-directories'
fi
kde_cv_all_paths="kde_have_all_paths=\"yes\" \
kde_htmldir=\"$kde_htmldir\" \
kde_appsdir=\"$kde_appsdir\" \
kde_icondir=\"$kde_icondir\" \
kde_sounddir=\"$kde_sounddir\" \
kde_datadir=\"$kde_datadir\" \
kde_locale=\"$kde_locale\" \
kde_cgidir=\"$kde_cgidir\" \
kde_confdir=\"$kde_confdir\" \
kde_kcfgdir=\"$kde_kcfgdir\" \
kde_mimedir=\"$kde_mimedir\" \
kde_toolbardir=\"$kde_toolbardir\" \
kde_wallpaperdir=\"$kde_wallpaperdir\" \
kde_templatesdir=\"$kde_templatesdir\" \
kde_bindir=\"$kde_bindir\" \
kde_servicesdir=\"$kde_servicesdir\" \
kde_servicetypesdir=\"$kde_servicetypesdir\" \
kde_moduledir=\"$kde_moduledir\" \
kde_styledir=\"$kde_styledir\" \
kde_widgetdir=\"$kde_widgetdir\" \
xdg_appsdir=\"$xdg_appsdir\" \
xdg_menudir=\"$xdg_menudir\" \
xdg_directorydir=\"$xdg_directorydir\" \
kde_result=defaults"
else
if test $kde_qtver = 1; then
{ echo "$as_me:31560: result: compiling" >&5
echo "${ECHO_T}compiling" >&6; }
{ echo "$as_me:31564: checking for KDE headers installed" >&5
echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6; }
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cat > conftest.$ac_ext <<EOF
#ifdef STDC_HEADERS
# include <stdlib.h>
#endif
#include <stdio.h>
#include "confdefs.h"
#include <kapp.h>
int main() {
printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
printf("kde_wallpaperdir=\\"%s\\"\n",
KApplication::kde_wallpaperdir().data());
printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
printf("kde_moduledir=\\"/tmp/dummy\\"\n");
printf("kde_styledir=\\"/tmp/dummy\\"\n");
printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
printf("xdg_menudir=\\"/tmp/dummy\\"\n");
printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
printf("kde_kcfgdir=\\"/tmp/dummy\\"\n");
return 0;
}
EOF
ac_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$all_includes $CPPFLAGS"
if { (eval echo "$as_me:31614: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:31617: \$? = $ac_status" >&5
(exit $ac_status); }; then
{ echo "$as_me:31619: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ { echo "$as_me:31622: error: your system is not able to compile a small KDE application!
Check, if you installed the KDE header files correctly.
For more details about this problem, look at the end of config.log." >&5
echo "$as_me: error: your system is not able to compile a small KDE application!
Check, if you installed the KDE header files correctly.
For more details about this problem, look at the end of config.log." >&2;}
{ (exit 1); exit 1; }; }
fi
CPPFLAGS=$ac_save_CPPFLAGS
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
KDE_TEST_RPATH=
if test -n "$USE_RPATH"; then
if test -n "$kde_libraries"; then
KDE_TEST_RPATH="-R $kde_libraries"
fi
if test -n "$qt_libraries"; then
KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
fi
if test -n "$x_libraries"; then
KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
fi
KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
fi
{ echo "$as_me:31659: checking for KDE libraries installed" >&5
echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6; }
ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
if { (eval echo "$as_me:31663: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:31666: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest; then
{ echo "$as_me:31668: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ { echo "$as_me:31671: error: your system fails at linking a small KDE application!
Check, if your compiler is installed correctly and if you have used the
same compiler to compile Qt and kdelibs as you did use now.
For more details about this problem, look at the end of config.log." >&5
echo "$as_me: error: your system fails at linking a small KDE application!
Check, if your compiler is installed correctly and if you have used the
same compiler to compile Qt and kdelibs as you did use now.
For more details about this problem, look at the end of config.log." >&2;}
{ (exit 1); exit 1; }; }
fi
if eval `KDEDIR= ./conftest 2>&5`; then
kde_result=done
else
kde_result=problems
fi
KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
kde_have_all_paths=yes
kde_cv_all_paths="kde_have_all_paths=\"yes\" \
kde_htmldir=\"$kde_htmldir\" \
kde_appsdir=\"$kde_appsdir\" \
kde_icondir=\"$kde_icondir\" \
kde_sounddir=\"$kde_sounddir\" \
kde_datadir=\"$kde_datadir\" \
kde_locale=\"$kde_locale\" \
kde_cgidir=\"$kde_cgidir\" \
kde_confdir=\"$kde_confdir\" \
kde_kcfgdir=\"$kde_kcfgdir\" \
kde_mimedir=\"$kde_mimedir\" \
kde_toolbardir=\"$kde_toolbardir\" \
kde_wallpaperdir=\"$kde_wallpaperdir\" \
kde_templatesdir=\"$kde_templatesdir\" \
kde_bindir=\"$kde_bindir\" \
kde_servicesdir=\"$kde_servicesdir\" \
kde_servicetypesdir=\"$kde_servicetypesdir\" \
kde_moduledir=\"$kde_moduledir\" \
kde_styledir=\"$kde_styledir\" \
kde_widgetdir=\"$kde_widgetdir\" \
xdg_appsdir=\"$xdg_appsdir\" \
xdg_menudir=\"$xdg_menudir\" \
xdg_directorydir=\"$xdg_directorydir\" \
kde_result=$kde_result"
else
{ { echo "$as_me:31720: error: path checking not yet supported for KDE 2" >&5
echo "$as_me: error: path checking not yet supported for KDE 2" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
kde_cached_paths=no
fi
eval "$kde_cv_all_paths"
if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
test -z "$kde_icondir" || test -z "$kde_sounddir" ||
test -z "$kde_datadir" || test -z "$kde_locale" ||
test -z "$kde_cgidir" || test -z "$kde_confdir" ||
test -z "$kde_kcfgdir" ||
test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
test -z "$kde_styledir" || test -z "kde_widgetdir" ||
test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" ||
test "x$kde_have_all_paths" != "xyes"; then
kde_have_all_paths=no
fi
if test "$kde_have_all_paths" = "no" && test "$kde_cached_paths" = "yes"; then
# wrong values were cached, may be, we can set better ones
kde_result=
kde_htmldir= kde_appsdir= kde_icondir= kde_sounddir=
kde_datadir= kde_locale= kde_cgidir= kde_confdir= kde_kcfgdir=
kde_mimedir= kde_toolbardir= kde_wallpaperdir= kde_templatesdir=
kde_bindir= kde_servicesdir= kde_servicetypesdir= kde_moduledir=
kde_have_all_paths=
kde_styledir=
kde_widgetdir=
xdg_appsdir = xdg_menudir= xdg_directorydir=
if test "$ac_use_path_checking" = "default"; then
if test -z "$kde_htmldir"; then
kde_htmldir='\${datadir}/doc/HTML'
fi
if test -z "$kde_appsdir"; then
kde_appsdir='\${datadir}/applnk'
fi
if test -z "$kde_icondir"; then
kde_icondir='\${datadir}/icons'
fi
if test -z "$kde_sounddir"; then
kde_sounddir='\${datadir}/sounds'
fi
if test -z "$kde_datadir"; then
kde_datadir='\${datadir}/apps'
fi
if test -z "$kde_locale"; then
kde_locale='\${datadir}/locale'
fi
if test -z "$kde_cgidir"; then
kde_cgidir='\${exec_prefix}/cgi-bin'
fi
if test -z "$kde_confdir"; then
kde_confdir='\${datadir}/config'
fi
if test -z "$kde_kcfgdir"; then
kde_kcfgdir='\${datadir}/config.kcfg'
fi
if test -z "$kde_mimedir"; then
kde_mimedir='\${datadir}/mimelnk'
fi
if test -z "$kde_toolbardir"; then
kde_toolbardir='\${datadir}/toolbar'
fi
if test -z "$kde_wallpaperdir"; then
kde_wallpaperdir='\${datadir}/wallpapers'
fi
if test -z "$kde_templatesdir"; then
kde_templatesdir='\${datadir}/templates'
fi
if test -z "$kde_bindir"; then
kde_bindir='\${exec_prefix}/bin'
fi
if test -z "$kde_servicesdir"; then
kde_servicesdir='\${datadir}/services'
fi
if test -z "$kde_servicetypesdir"; then
kde_servicetypesdir='\${datadir}/servicetypes'
fi
if test -z "$kde_moduledir"; then
if test "$kde_qtver" = "2"; then
kde_moduledir='\${libdir}/kde2'
else
kde_moduledir='\${libdir}/kde3'
fi
fi
if test -z "$kde_styledir"; then
kde_styledir='\${libdir}/kde3/plugins/styles'
fi
if test -z "$kde_widgetdir"; then
kde_widgetdir='\${libdir}/kde3/plugins/designer'
fi
if test -z "$xdg_appsdir"; then
xdg_appsdir='\${datadir}/applications/kde'
fi
if test -z "$xdg_menudir"; then
xdg_menudir='\${sysconfdir}/xdg/menus'
fi
if test -z "$xdg_directorydir"; then
xdg_directorydir='\${datadir}/desktop-directories'
fi
kde_cv_all_paths="kde_have_all_paths=\"yes\" \
kde_htmldir=\"$kde_htmldir\" \
kde_appsdir=\"$kde_appsdir\" \
kde_icondir=\"$kde_icondir\" \
kde_sounddir=\"$kde_sounddir\" \
kde_datadir=\"$kde_datadir\" \
kde_locale=\"$kde_locale\" \
kde_cgidir=\"$kde_cgidir\" \
kde_confdir=\"$kde_confdir\" \
kde_kcfgdir=\"$kde_kcfgdir\" \
kde_mimedir=\"$kde_mimedir\" \
kde_toolbardir=\"$kde_toolbardir\" \
kde_wallpaperdir=\"$kde_wallpaperdir\" \
kde_templatesdir=\"$kde_templatesdir\" \
kde_bindir=\"$kde_bindir\" \
kde_servicesdir=\"$kde_servicesdir\" \
kde_servicetypesdir=\"$kde_servicetypesdir\" \
kde_moduledir=\"$kde_moduledir\" \
kde_styledir=\"$kde_styledir\" \
kde_widgetdir=\"$kde_widgetdir\" \
xdg_appsdir=\"$xdg_appsdir\" \
xdg_menudir=\"$xdg_menudir\" \
xdg_directorydir=\"$xdg_directorydir\" \
kde_result=defaults"
else
if test $kde_qtver = 1; then
{ echo "$as_me:31862: result: compiling" >&5
echo "${ECHO_T}compiling" >&6; }
{ echo "$as_me:31866: checking for KDE headers installed" >&5
echo $ECHO_N "checking for KDE headers installed... $ECHO_C" >&6; }
ac_ext=cpp
ac_cpp='$CXXCPP $CPPFLAGS'
ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_cxx_compiler_gnu
ac_link='rm -rf SunWS_cache; ${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cat > conftest.$ac_ext <<EOF
#ifdef STDC_HEADERS
# include <stdlib.h>
#endif
#include <stdio.h>
#include "confdefs.h"
#include <kapp.h>
int main() {
printf("kde_htmldir=\\"%s\\"\n", KApplication::kde_htmldir().data());
printf("kde_appsdir=\\"%s\\"\n", KApplication::kde_appsdir().data());
printf("kde_icondir=\\"%s\\"\n", KApplication::kde_icondir().data());
printf("kde_sounddir=\\"%s\\"\n", KApplication::kde_sounddir().data());
printf("kde_datadir=\\"%s\\"\n", KApplication::kde_datadir().data());
printf("kde_locale=\\"%s\\"\n", KApplication::kde_localedir().data());
printf("kde_cgidir=\\"%s\\"\n", KApplication::kde_cgidir().data());
printf("kde_confdir=\\"%s\\"\n", KApplication::kde_configdir().data());
printf("kde_mimedir=\\"%s\\"\n", KApplication::kde_mimedir().data());
printf("kde_toolbardir=\\"%s\\"\n", KApplication::kde_toolbardir().data());
printf("kde_wallpaperdir=\\"%s\\"\n",
KApplication::kde_wallpaperdir().data());
printf("kde_bindir=\\"%s\\"\n", KApplication::kde_bindir().data());
printf("kde_partsdir=\\"%s\\"\n", KApplication::kde_partsdir().data());
printf("kde_servicesdir=\\"/tmp/dummy\\"\n");
printf("kde_servicetypesdir=\\"/tmp/dummy\\"\n");
printf("kde_moduledir=\\"/tmp/dummy\\"\n");
printf("kde_styledir=\\"/tmp/dummy\\"\n");
printf("kde_widgetdir=\\"/tmp/dummy\\"\n");
printf("xdg_appsdir=\\"/tmp/dummy\\"\n");
printf("xdg_menudir=\\"/tmp/dummy\\"\n");
printf("xdg_directorydir=\\"/tmp/dummy\\"\n");
printf("kde_kcfgdir=\\"/tmp/dummy\\"\n");
return 0;
}
EOF
ac_save_CPPFLAGS=$CPPFLAGS
CPPFLAGS="$all_includes $CPPFLAGS"
if { (eval echo "$as_me:31916: \"$ac_compile\"") >&5
(eval $ac_compile) 2>&5
ac_status=$?
echo "$as_me:31919: \$? = $ac_status" >&5
(exit $ac_status); }; then
{ echo "$as_me:31921: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ { echo "$as_me:31924: error: your system is not able to compile a small KDE application!
Check, if you installed the KDE header files correctly.
For more details about this problem, look at the end of config.log." >&5
echo "$as_me: error: your system is not able to compile a small KDE application!
Check, if you installed the KDE header files correctly.
For more details about this problem, look at the end of config.log." >&2;}
{ (exit 1); exit 1; }; }
fi
CPPFLAGS=$ac_save_CPPFLAGS
ac_ext=c
ac_cpp='$CPP $CPPFLAGS'
ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5'
ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5'
ac_compiler_gnu=$ac_cv_c_compiler_gnu
KDE_TEST_RPATH=
if test -n "$USE_RPATH"; then
if test -n "$kde_libraries"; then
KDE_TEST_RPATH="-R $kde_libraries"
fi
if test -n "$qt_libraries"; then
KDE_TEST_RPATH="$KDE_TEST_RPATH -R $qt_libraries"
fi
if test -n "$x_libraries"; then
KDE_TEST_RPATH="$KDE_TEST_RPATH -R $x_libraries"
fi
KDE_TEST_RPATH="$KDE_TEST_RPATH $KDE_EXTRA_RPATH"
fi
{ echo "$as_me:31961: checking for KDE libraries installed" >&5
echo $ECHO_N "checking for KDE libraries installed... $ECHO_C" >&6; }
ac_link='$LIBTOOL_SHELL --silent --mode=link ${CXX-g++} -o conftest $CXXFLAGS $all_includes $CPPFLAGS $LDFLAGS $all_libraries conftest.$ac_ext $LIBS -lkdecore $LIBQT $KDE_TEST_RPATH 1>&5'
if { (eval echo "$as_me:31965: \"$ac_link\"") >&5
(eval $ac_link) 2>&5
ac_status=$?
echo "$as_me:31968: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest; then
{ echo "$as_me:31970: result: yes" >&5
echo "${ECHO_T}yes" >&6; }
else
{ { echo "$as_me:31973: error: your system fails at linking a small KDE application!
Check, if your compiler is installed correctly and if you have used the
same compiler to compile Qt and kdelibs as you did use now.
For more details about this problem, look at the end of config.log." >&5
echo "$as_me: error: your system fails at linking a small KDE application!
Check, if your compiler is installed correctly and if you have used the
same compiler to compile Qt and kdelibs as you did use now.
For more details about this problem, look at the end of config.log." >&2;}
{ (exit 1); exit 1; }; }
fi
if eval `KDEDIR= ./conftest 2>&5`; then
kde_result=done
else
kde_result=problems
fi
KDEDIR= ./conftest 2> /dev/null >&5 # make an echo for config.log
kde_have_all_paths=yes
kde_cv_all_paths="kde_have_all_paths=\"yes\" \
kde_htmldir=\"$kde_htmldir\" \
kde_appsdir=\"$kde_appsdir\" \
kde_icondir=\"$kde_icondir\" \
kde_sounddir=\"$kde_sounddir\" \
kde_datadir=\"$kde_datadir\" \
kde_locale=\"$kde_locale\" \
kde_cgidir=\"$kde_cgidir\" \
kde_confdir=\"$kde_confdir\" \
kde_kcfgdir=\"$kde_kcfgdir\" \
kde_mimedir=\"$kde_mimedir\" \
kde_toolbardir=\"$kde_toolbardir\" \
kde_wallpaperdir=\"$kde_wallpaperdir\" \
kde_templatesdir=\"$kde_templatesdir\" \
kde_bindir=\"$kde_bindir\" \
kde_servicesdir=\"$kde_servicesdir\" \
kde_servicetypesdir=\"$kde_servicetypesdir\" \
kde_moduledir=\"$kde_moduledir\" \
kde_styledir=\"$kde_styledir\" \
kde_widgetdir=\"$kde_widgetdir\" \
xdg_appsdir=\"$xdg_appsdir\" \
xdg_menudir=\"$xdg_menudir\" \
xdg_directorydir=\"$xdg_directorydir\" \
kde_result=$kde_result"
else
{ { echo "$as_me:32022: error: path checking not yet supported for KDE 2" >&5
echo "$as_me: error: path checking not yet supported for KDE 2" >&2;}
{ (exit 1); exit 1; }; }
fi
fi
eval "$kde_cv_all_paths"
if test -z "$kde_htmldir" || test -z "$kde_appsdir" ||
test -z "$kde_icondir" || test -z "$kde_sounddir" ||
test -z "$kde_datadir" || test -z "$kde_locale" ||
test -z "$kde_cgidir" || test -z "$kde_confdir" ||
test -z "$kde_kcfgdir" ||
test -z "$kde_mimedir" || test -z "$kde_toolbardir" ||
test -z "$kde_wallpaperdir" || test -z "$kde_templatesdir" ||
test -z "$kde_bindir" || test -z "$kde_servicesdir" ||
test -z "$kde_servicetypesdir" || test -z "$kde_moduledir" ||
test -z "$kde_styledir" || test -z "kde_widgetdir" ||
test -z "$xdg_appsdir" || test -z "$xdg_menudir" || test -z "$xdg_directorydir" ||
test "x$kde_have_all_paths" != "xyes"; then
kde_have_all_paths=no
fi
kde_result="$kde_result (cache overridden)"
fi
if test "$kde_have_all_paths" = "no"; then
{ { echo "$as_me:32048: error: configure could not run a little KDE program to test the environment.
Since it had compiled and linked before, it must be a strange problem on your system.
Look at config.log for details. If you are not able to fix this, look at
http://www.kde.org/faq/installation.html or any www.kde.org mirror.
(If you're using an egcs version on Linux, you may update binutils!)
" >&5
echo "$as_me: error: configure could not run a little KDE program to test the environment.
Since it had compiled and linked before, it must be a strange problem on your system.
Look at config.log for details. If you are not able to fix this, look at
http://www.kde.org/faq/installation.html or any www.kde.org mirror.
(If you're using an egcs version on Linux, you may update binutils!)
" >&2;}
{ (exit 1); exit 1; }; }
else
rm -f conftest*
{ echo "$as_me:32063: result: $kde_result" >&5
echo "${ECHO_T}$kde_result" >&6; }
fi
bindir=$kde_bindir
# Check whether --with-arts was given.
if test "${with_arts+set}" = set; then
withval=$with_arts; build_arts=$withval
else
build_arts=yes
fi
if test "$build_arts" '!=' "no"; then
include_ARTS_TRUE=
include_ARTS_FALSE='#'
else
include_ARTS_TRUE='#'
include_ARTS_FALSE=
fi
if test "$build_arts" = "no"; then
cat >>confdefs.h <<\_ACEOF
#define WITHOUT_ARTS 1
_ACEOF
fi
kde_default_bindirs="/usr/bin /usr/local/bin /opt/local/bin /usr/X11R6/bin /opt/kde/bin /opt/kde3/bin /usr/kde/bin /usr/local/kde/bin"
test -n "$KDEDIR" && kde_default_bindirs="$KDEDIR/bin $kde_default_bindirs"
if test -n "$KDEDIRS"; then
kde_save_IFS=$IFS
IFS=:
for dir in $KDEDIRS; do
kde_default_bindirs="$dir/bin $kde_default_bindirs "
done
IFS=$kde_save_IFS
fi
kde_default_bindirs="$exec_prefix/bin $prefix/bin $kde_libs_prefix/bin $kde_default_bindirs"
{ echo "$as_me:32111: checking for dcopidl" >&5
echo $ECHO_N "checking for dcopidl... $ECHO_C" >&6; }
if test -n "$DCOPIDL"; then
kde_cv_path="$DCOPIDL";
else
kde_cache=`echo dcopidl | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/dcopidl"; then
if test -n ""
then
evalstr="$dir/dcopidl 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/dcopidl"
break
fi
else
kde_cv_path="$dir/dcopidl"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32161: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32164: error: The important program dcopidl was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program dcopidl was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32173: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
DCOPIDL=$kde_cv_path
fi
{ echo "$as_me:32180: checking for dcopidl2cpp" >&5
echo $ECHO_N "checking for dcopidl2cpp... $ECHO_C" >&6; }
if test -n "$DCOPIDL2CPP"; then
kde_cv_path="$DCOPIDL2CPP";
else
kde_cache=`echo dcopidl2cpp | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/dcopidl2cpp"; then
if test -n ""
then
evalstr="$dir/dcopidl2cpp 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/dcopidl2cpp"
break
fi
else
kde_cv_path="$dir/dcopidl2cpp"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32230: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32233: error: The important program dcopidl2cpp was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program dcopidl2cpp was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32242: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
DCOPIDL2CPP=$kde_cv_path
fi
if test "$build_arts" '!=' "no"; then
{ echo "$as_me:32250: checking for mcopidl" >&5
echo $ECHO_N "checking for mcopidl... $ECHO_C" >&6; }
if test -n "$MCOPIDL"; then
kde_cv_path="$MCOPIDL";
else
kde_cache=`echo mcopidl | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/mcopidl"; then
if test -n ""
then
evalstr="$dir/mcopidl 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/mcopidl"
break
fi
else
kde_cv_path="$dir/mcopidl"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32300: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32303: error: The important program mcopidl was not found!
Please check whether you installed aRts correctly or use
--without-arts to compile without aRts support (this will remove functionality).
" >&5
echo "$as_me: error: The important program mcopidl was not found!
Please check whether you installed aRts correctly or use
--without-arts to compile without aRts support (this will remove functionality).
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32314: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
MCOPIDL=$kde_cv_path
fi
{ echo "$as_me:32321: checking for artsc-config" >&5
echo $ECHO_N "checking for artsc-config... $ECHO_C" >&6; }
if test -n "$ARTSCCONFIG"; then
kde_cv_path="$ARTSCCONFIG";
else
kde_cache=`echo artsc-config | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/artsc-config"; then
if test -n ""
then
evalstr="$dir/artsc-config 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/artsc-config"
break
fi
else
kde_cv_path="$dir/artsc-config"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32371: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32374: error: The important program artsc-config was not found!
Please check whether you installed aRts correctly or use
--without-arts to compile without aRts support (this will remove functionality).
" >&5
echo "$as_me: error: The important program artsc-config was not found!
Please check whether you installed aRts correctly or use
--without-arts to compile without aRts support (this will remove functionality).
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32385: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
ARTSCCONFIG=$kde_cv_path
fi
fi
{ echo "$as_me:32393: checking for meinproc" >&5
echo $ECHO_N "checking for meinproc... $ECHO_C" >&6; }
if test -n "$MEINPROC"; then
kde_cv_path="$MEINPROC";
else
kde_cache=`echo meinproc | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/meinproc"; then
if test -n ""
then
evalstr="$dir/meinproc 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/meinproc"
break
fi
else
kde_cv_path="$dir/meinproc"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32443: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
else
{ echo "$as_me:32447: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
MEINPROC=$kde_cv_path
fi
kde32ornewer=1
kde33ornewer=1
if test -n "$kde_qtver" && test "$kde_qtver" -lt 3; then
kde32ornewer=
kde33ornewer=
else
if test "$kde_qtver" = "3"; then
if test "$kde_qtsubver" -le 1; then
kde32ornewer=
fi
if test "$kde_qtsubver" -le 2; then
kde33ornewer=
fi
if test "$KDECONFIG" != "compiled"; then
if test `$KDECONFIG --version | grep KDE | sed 's/KDE: \(...\).*/\1/'` = 3.2; then
kde33ornewer=
fi
fi
fi
fi
if test -n "$kde32ornewer"; then
{ echo "$as_me:32477: checking for kconfig_compiler" >&5
echo $ECHO_N "checking for kconfig_compiler... $ECHO_C" >&6; }
if test -n "$KCONFIG_COMPILER"; then
kde_cv_path="$KCONFIG_COMPILER";
else
kde_cache=`echo kconfig_compiler | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/kconfig_compiler"; then
if test -n ""
then
evalstr="$dir/kconfig_compiler 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/kconfig_compiler"
break
fi
else
kde_cv_path="$dir/kconfig_compiler"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32527: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32530: error: The important program kconfig_compiler was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program kconfig_compiler was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32539: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
KCONFIG_COMPILER=$kde_cv_path
fi
{ echo "$as_me:32546: checking for dcopidlng" >&5
echo $ECHO_N "checking for dcopidlng... $ECHO_C" >&6; }
if test -n "$DCOPIDLNG"; then
kde_cv_path="$DCOPIDLNG";
else
kde_cache=`echo dcopidlng | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/dcopidlng"; then
if test -n ""
then
evalstr="$dir/dcopidlng 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/dcopidlng"
break
fi
else
kde_cv_path="$dir/dcopidlng"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32596: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32599: error: The important program dcopidlng was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program dcopidlng was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32608: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
DCOPIDLNG=$kde_cv_path
fi
fi
if test -n "$kde33ornewer"; then
{ echo "$as_me:32617: checking for makekdewidgets" >&5
echo $ECHO_N "checking for makekdewidgets... $ECHO_C" >&6; }
if test -n "$MAKEKDEWIDGETS"; then
kde_cv_path="$MAKEKDEWIDGETS";
else
kde_cache=`echo makekdewidgets | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="$kde_default_bindirs $dirs"
else dirs="$dirs $kde_default_bindirs"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/makekdewidgets"; then
if test -n ""
then
evalstr="$dir/makekdewidgets 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/makekdewidgets"
break
fi
else
kde_cv_path="$dir/makekdewidgets"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32667: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
{ { echo "$as_me:32670: error: The important program makekdewidgets was not found!
Please check whether you installed KDE correctly.
" >&5
echo "$as_me: error: The important program makekdewidgets was not found!
Please check whether you installed KDE correctly.
" >&2;}
{ (exit 1); exit 1; }; }
else
{ echo "$as_me:32679: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
MAKEKDEWIDGETS=$kde_cv_path
fi
fi
{ echo "$as_me:32688: checking for xmllint" >&5
echo $ECHO_N "checking for xmllint... $ECHO_C" >&6; }
if test -n "$XMLLINT"; then
kde_cv_path="$XMLLINT";
else
kde_cache=`echo xmllint | sed 'y%./+-%__p_%'`
if { as_var=kde_cv_path_$kde_cache; eval "test \"\${$as_var+set}\" = set"; }; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
kde_cv_path="NONE"
kde_save_IFS=$IFS
IFS=':'
dirs=""
for dir in $PATH; do
dirs="$dirs $dir"
done
if test -z ""; then dirs="${prefix}/bin ${exec_prefix}/bin $dirs"
else dirs="$dirs ${prefix}/bin ${exec_prefix}/bin"
fi
IFS=$kde_save_IFS
for dir in $dirs; do
if test -x "$dir/xmllint"; then
if test -n ""
then
evalstr="$dir/xmllint 2>&1 "
if eval $evalstr; then
kde_cv_path="$dir/xmllint"
break
fi
else
kde_cv_path="$dir/xmllint"
break
fi
fi
done
eval "kde_cv_path_$kde_cache=$kde_cv_path"
fi
eval "kde_cv_path=\"`echo '$kde_cv_path_'$kde_cache`\""
fi
if test -z "$kde_cv_path" || test "$kde_cv_path" = NONE; then
{ echo "$as_me:32738: result: not found" >&5
echo "${ECHO_T}not found" >&6; }
XMLLINT=""
else
{ echo "$as_me:32742: result: $kde_cv_path" >&5
echo "${ECHO_T}$kde_cv_path" >&6; }
XMLLINT=$kde_cv_path
fi
if test -n "$MEINPROC" -a "$MEINPROC" != "compiled"; then
kde_sharedirs="/usr/share/kde /usr/local/share /usr/share /opt/kde3/share /opt/kde/share $prefix/share"
test -n "$KDEDIR" && kde_sharedirs="$KDEDIR/share $kde_sharedirs"
KDE_XSL_STYLESHEET=NO
for i in $kde_sharedirs;
do
for j in apps/ksgmltools2/customization/kde-chunk.xsl;
do
echo "configure: 32758: $i/$j" >&5
if test -r "$i/$j"; then
echo "taking that" >&5
KDE_XSL_STYLESHEET=$i
break 2
fi
done
done
if test "$KDE_XSL_STYLESHEET" = "NO"; then
KDE_XSL_STYLESHEET=""
else
KDE_XSL_STYLESHEET="$KDE_XSL_STYLESHEET/apps/ksgmltools2/customization/kde-chunk.xsl"
fi
fi
DCOP_DEPENDENCIES='$(DCOPIDL)'
if test -n "$kde32ornewer"; then
KCFG_DEPENDENCIES='$(KCONFIG_COMPILER)'
DCOP_DEPENDENCIES='$(DCOPIDL) $(DCOPIDLNG)'
fi
kdeinitdir='$(kde_moduledir)'
if test "$kde_qtver" = 1; then
kde_minidir="$kde_icondir/mini"
else
# for KDE 1 - this breaks KDE2 apps using minidir, but
# that's the plan ;-/
kde_minidir="/dev/null"
fi
if test $kde_qtver = 3; then
case $host in
*cygwin*) lib_kded="-lkdeinit_kded" ;;
*) lib_kded="" ;;
esac
LIB_KDED=$lib_kded
LIB_KDECORE="-lkdecore"
LIB_KDEUI="-lkdeui"
LIB_KIO="-lkio"
LIB_KJS="-lkjs"
LIB_SMB="-lsmb"
LIB_KAB="-lkab"
LIB_KABC="-lkabc"
LIB_KHTML="-lkhtml"
LIB_KSPELL="-lkspell"
LIB_KPARTS="-lkparts"
LIB_KDEPRINT="-lkdeprint"
LIB_KUTILS="-lkutils"
LIB_KDEPIM="-lkdepim"
LIB_KIMPROXY="-lkimproxy"
LIB_KNEWSTUFF="-lknewstuff"
LIB_KDNSSD="-lkdnssd"
LIB_KUNITTEST="-lkunittest"
# these are for backward compatibility
LIB_KSYCOCA="-lkio"
LIB_KFILE="-lkio"
elif test $kde_qtver = 2; then
LIB_KDECORE="-lkdecore"
LIB_KDEUI="-lkdeui"
LIB_KIO="-lkio"
LIB_KSYCOCA="-lksycoca"
LIB_SMB="-lsmb"
LIB_KFILE="-lkfile"
LIB_KAB="-lkab"
LIB_KHTML="-lkhtml"
LIB_KSPELL="-lkspell"
LIB_KPARTS="-lkparts"
LIB_KDEPRINT="-lkdeprint"
else
LIB_KDECORE="-lkdecore -lXext $(LIB_QT)"
LIB_KDEUI="-lkdeui $(LIB_KDECORE)"
LIB_KFM="-lkfm $(LIB_KDECORE)"
LIB_KFILE="-lkfile $(LIB_KFM) $(LIB_KDEUI)"
LIB_KAB="-lkab $(LIB_KIMGIO) $(LIB_KDECORE)"
fi
#MIN_CONFIG(3.2.0)
{ echo "$as_me:32916: checking whether byte ordering is bigendian" >&5
echo $ECHO_N "checking whether byte ordering is bigendian... $ECHO_C" >&6; }
if test "${ac_cv_c_bigendian+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
# See if sys/param.h defines the BYTE_ORDER macro.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/param.h>
int
main ()
{
#if ! (defined BYTE_ORDER && defined BIG_ENDIAN && defined LITTLE_ENDIAN \
&& BYTE_ORDER && BIG_ENDIAN && LITTLE_ENDIAN)
bogus endian macros
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:32949: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:32955: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
# It does; now see whether it defined to BIG_ENDIAN or not.
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
#include <sys/types.h>
#include <sys/param.h>
int
main ()
{
#if BYTE_ORDER != BIG_ENDIAN
not big endian
#endif
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:32987: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:32993: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
ac_cv_c_bigendian=yes
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
ac_cv_c_bigendian=no
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
# It does not; compile a test program.
if test "$cross_compiling" = yes; then
# try to guess the endianness by grepping values into an object file
ac_cv_c_bigendian=unknown
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
short int ascii_mm[] = { 0x4249, 0x4765, 0x6E44, 0x6961, 0x6E53, 0x7953, 0 };
short int ascii_ii[] = { 0x694C, 0x5454, 0x656C, 0x6E45, 0x6944, 0x6E61, 0 };
void _ascii () { char *s = (char *) ascii_mm; s = (char *) ascii_ii; }
short int ebcdic_ii[] = { 0x89D3, 0xE3E3, 0x8593, 0x95C5, 0x89C4, 0x9581, 0 };
short int ebcdic_mm[] = { 0xC2C9, 0xC785, 0x95C4, 0x8981, 0x95E2, 0xA8E2, 0 };
void _ebcdic () { char *s = (char *) ebcdic_mm; s = (char *) ebcdic_ii; }
int
main ()
{
_ascii (); _ebcdic ();
;
return 0;
}
_ACEOF
rm -f conftest.$ac_objext
if { (ac_try="$ac_compile"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:33041: $ac_try_echo\"") >&5
(eval "$ac_compile") 2>conftest.er1
ac_status=$?
grep -v '^ *+' conftest.er1 >conftest.err
rm -f conftest.er1
cat conftest.err >&5
echo "$as_me:33047: \$? = $ac_status" >&5
(exit $ac_status); } && {
test -z "$ac_c_werror_flag" ||
test ! -s conftest.err
} && test -s conftest.$ac_objext; then
if grep BIGenDianSyS conftest.$ac_objext >/dev/null ; then
ac_cv_c_bigendian=yes
fi
if grep LiTTleEnDian conftest.$ac_objext >/dev/null ; then
if test "$ac_cv_c_bigendian" = unknown; then
ac_cv_c_bigendian=no
else
# finding both strings is unlikely to happen, but who knows?
ac_cv_c_bigendian=unknown
fi
fi
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
else
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
$ac_includes_default
int
main ()
{
/* Are we little or big endian? From Harbison&Steele. */
union
{
long int l;
char c[sizeof (long int)];
} u;
u.l = 1;
return u.c[sizeof (long int) - 1] == 1;
;
return 0;
}
_ACEOF
rm -f conftest$ac_exeext
if { (ac_try="$ac_link"
case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:33102: $ac_try_echo\"") >&5
(eval "$ac_link") 2>&5
ac_status=$?
echo "$as_me:33105: \$? = $ac_status" >&5
(exit $ac_status); } && { ac_try='./conftest$ac_exeext'
{ (case "(($ac_try" in
*\"* | *\`* | *\\*) ac_try_echo=\$ac_try;;
*) ac_try_echo=$ac_try;;
esac
eval "echo \"\$as_me:33111: $ac_try_echo\"") >&5
(eval "$ac_try") 2>&5
ac_status=$?
echo "$as_me:33114: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
ac_cv_c_bigendian=no
else
echo "$as_me: program exited with status $ac_status" >&5
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
( exit $ac_status )
ac_cv_c_bigendian=yes
fi
rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext
fi
fi
rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
fi
{ echo "$as_me:33133: result: $ac_cv_c_bigendian" >&5
echo "${ECHO_T}$ac_cv_c_bigendian" >&6; }
case $ac_cv_c_bigendian in
yes)
cat >>confdefs.h <<\_ACEOF
#define WORDS_BIGENDIAN 1
_ACEOF
;;
no)
;;
*)
{ { echo "$as_me:33145: error: unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" >&5
echo "$as_me: error: unknown endianness
presetting ac_cv_c_bigendian=no (or yes) will help" >&2;}
{ (exit 1); exit 1; }; } ;;
esac
{ echo "$as_me:33153: checking for MAXPATHLEN" >&5
echo $ECHO_N "checking for MAXPATHLEN... $ECHO_C" >&6; }
if test "${ac_cv_maxpathlen+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
cat > conftest.$ac_ext <<EOF
#ifdef STDC_HEADERS
# include <stdlib.h>
#endif
#include <stdio.h>
#include <sys/param.h>
#ifndef MAXPATHLEN
#define MAXPATHLEN 1024
#endif
KDE_HELLO MAXPATHLEN
EOF
ac_try="$ac_cpp conftest.$ac_ext 2>/dev/null | grep '^KDE_HELLO' >conftest.out"
if { (eval echo "$as_me:33175: \"$ac_try\"") >&5
(eval $ac_try) 2>&5
ac_status=$?
echo "$as_me:33178: \$? = $ac_status" >&5
(exit $ac_status); } && test -s conftest.out; then
ac_cv_maxpathlen=`sed 's#KDE_HELLO ##' conftest.out`
else
ac_cv_maxpathlen=1024
fi
rm conftest.*
fi
{ echo "$as_me:33190: result: $ac_cv_maxpathlen" >&5
echo "${ECHO_T}$ac_cv_maxpathlen" >&6; }
cat >>confdefs.h <<_ACEOF
#define KDEMAXPATHLEN $ac_cv_maxpathlen
_ACEOF
DO_NOT_COMPILE="$DO_NOT_COMPILE CVS debian bsd-port admin"
TOPSUBDIRS=""
if test ! -s $srcdir/subdirs; then
files=`cd $srcdir && ls -1`
dirs=`for i in $files; do if test -d $i; then echo $i; fi; done`
for i in $dirs; do
echo $i >> $srcdir/subdirs
done
fi
ac_topsubdirs=
if test -s $srcdir/inst-apps; then
ac_topsubdirs="`cat $srcdir/inst-apps`"
elif test -s $srcdir/subdirs; then
ac_topsubdirs="`cat $srcdir/subdirs`"
fi
for i in $ac_topsubdirs; do
{ echo "$as_me:33220: checking if $i should be compiled" >&5
echo $ECHO_N "checking if $i should be compiled... $ECHO_C" >&6; }
if test -d $srcdir/$i; then
install_it="yes"
for j in $DO_NOT_COMPILE; do
if test $i = $j; then
install_it="no"
fi
done
else
install_it="no"
fi
{ echo "$as_me:33232: result: $install_it" >&5
echo "${ECHO_T}$install_it" >&6; }
vari=`echo $i | sed -e 's,[-+.@],_,g'`
if test $install_it = "yes"; then
TOPSUBDIRS="$TOPSUBDIRS $i"
eval "$vari""_SUBDIR_included=yes"
else
eval "$vari""_SUBDIR_included=no"
fi
done
ac_config_files="$ac_config_files Makefile"
ac_config_files="$ac_config_files doc/Makefile"
ac_config_files="$ac_config_files doc/en/Makefile"
ac_config_files="$ac_config_files po/Makefile"
ac_config_files="$ac_config_files src/Makefile"
cat >confcache <<\_ACEOF
# This file is a shell script that caches the results of configure
# tests run on this system so they can be shared between configure
# scripts and configure runs, see configure's option --config-cache.
# It is not useful on other systems. If it contains results you don't
# want to keep, you may remove or edit it.
#
# config.status only pays attention to the cache file if you give it
# the --recheck option to rerun configure.
#
# `ac_cv_env_foo' variables (set or unset) will be overridden when
# loading this file, other *unset* `ac_cv_foo' will be assigned the
# following values.
_ACEOF
# The following way of writing the cache mishandles newlines in values,
# but we know of no workaround that is simple, portable, and efficient.
# So, we kill variables containing newlines.
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(
for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do
eval ac_val=\$$ac_var
case $ac_val in #(
*${as_nl}*)
case $ac_var in #(
*_cv_*) { echo "$as_me:33282: WARNING: Cache variable $ac_var contains a newline." >&5
echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;;
esac
case $ac_var in #(
_ | IFS | as_nl) ;; #(
*) $as_unset $ac_var ;;
esac ;;
esac
done
(set) 2>&1 |
case $as_nl`(ac_space=' '; set) 2>&1` in #(
*${as_nl}ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote
# substitution turns \\\\ into \\, and sed turns \\ into \).
sed -n \
"s/'/'\\\\''/g;
s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p"
;; #(
*)
# `set' quotes correctly as required by POSIX, so do not add quotes.
sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p"
;;
esac |
sort
) |
sed '
/^ac_cv_env_/b end
t clear
:clear
s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/
t end
s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/
:end' >>confcache
if diff "$cache_file" confcache >/dev/null 2>&1; then :; else
if test -w "$cache_file"; then
test "x$cache_file" != "x/dev/null" &&
{ echo "$as_me:33319: updating cache $cache_file" >&5
echo "$as_me: updating cache $cache_file" >&6;}
cat confcache >$cache_file
else
{ echo "$as_me:33323: not updating unwritable cache $cache_file" >&5
echo "$as_me: not updating unwritable cache $cache_file" >&6;}
fi
fi
rm -f confcache
test "x$prefix" = xNONE && prefix=$ac_default_prefix
# Let make expand exec_prefix.
test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
DEFS=-DHAVE_CONFIG_H
ac_libobjs=
ac_ltlibobjs=
for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue
# 1. Remove the extension, and $U if already installed.
ac_script='s/\$U\././;s/\.o$//;s/\.obj$//'
ac_i=`echo "$ac_i" | sed "$ac_script"`
# 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR
# will be set to the directory where LIBOBJS objects are built.
ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext"
ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo'
done
LIBOBJS=$ac_libobjs
LTLIBOBJS=$ac_ltlibobjs
if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then
{ { echo "$as_me:33352: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"AMDEP\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then
{ { echo "$as_me:33359: error: conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"am__fastdepCC\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then
{ { echo "$as_me:33366: error: conditional \"am__fastdepCXX\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${unsermake_enable_pch_TRUE}" && test -z "${unsermake_enable_pch_FALSE}"; then
{ { echo "$as_me:33373: error: conditional \"unsermake_enable_pch\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"unsermake_enable_pch\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${include_x11_TRUE}" && test -z "${include_x11_FALSE}"; then
{ { echo "$as_me:33380: error: conditional \"include_x11\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"include_x11\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
if test -z "${include_ARTS_TRUE}" && test -z "${include_ARTS_FALSE}"; then
{ { echo "$as_me:33387: error: conditional \"include_ARTS\" was never defined.
Usually this means the macro was only invoked conditionally." >&5
echo "$as_me: error: conditional \"include_ARTS\" was never defined.
Usually this means the macro was only invoked conditionally." >&2;}
{ (exit 1); exit 1; }; }
fi
: ${CONFIG_STATUS=./config.status}
ac_clean_files_save=$ac_clean_files
ac_clean_files="$ac_clean_files $CONFIG_STATUS"
{ echo "$as_me:33397: creating $CONFIG_STATUS" >&5
echo "$as_me: creating $CONFIG_STATUS" >&6;}
cat >$CONFIG_STATUS <<_ACEOF
#! $SHELL
# Generated by $as_me.
# Run this file to recreate the current configuration.
# Compiler output produced by configure, useful for debugging
# configure, is in config.log if it exists.
debug=false
ac_cs_recheck=false
ac_cs_silent=false
SHELL=\${CONFIG_SHELL-$SHELL}
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
# Be more Bourne compatible
DUALCASE=1; export DUALCASE # for MKS sh
if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
emulate sh
NULLCMD=:
# Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
# is contrary to our usage. Disable this feature.
alias -g '${1+"$@"}'='"$@"'
setopt NO_GLOB_SUBST
else
case `(set -o) 2>/dev/null` in
*posix*) set -o posix ;;
esac
fi
# PATH needs CR
# Avoid depending upon Character Ranges.
as_cr_letters='abcdefghijklmnopqrstuvwxyz'
as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ'
as_cr_Letters=$as_cr_letters$as_cr_LETTERS
as_cr_digits='0123456789'
as_cr_alnum=$as_cr_Letters$as_cr_digits
# The user is always right.
if test "${PATH_SEPARATOR+set}" != set; then
echo "#! /bin/sh" >conf$$.sh
echo "exit 0" >>conf$$.sh
chmod +x conf$$.sh
if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then
PATH_SEPARATOR=';'
else
PATH_SEPARATOR=:
fi
rm -f conf$$.sh
fi
# Support unset when possible.
if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then
as_unset=unset
else
as_unset=false
fi
# IFS
# We need space, tab and new line, in precisely that order. Quoting is
# there to prevent editors from complaining about space-tab.
# (If _AS_PATH_WALK were called with IFS unset, it would disable word
# splitting by setting IFS to empty value.)
as_nl='
'
IFS=" "" $as_nl"
# Find who we are. Look in the path if we contain no directory separator.
case $0 in
*[\\/]* ) as_myself=$0 ;;
*) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR
for as_dir in $PATH
do
IFS=$as_save_IFS
test -z "$as_dir" && as_dir=.
test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break
done
IFS=$as_save_IFS
;;
esac
# We did not find ourselves, most probably we were run as `sh COMMAND'
# in which case we are not to be found in the path.
if test "x$as_myself" = x; then
as_myself=$0
fi
if test ! -f "$as_myself"; then
echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2
{ (exit 1); exit 1; }
fi
# Work around bugs in pre-3.0 UWIN ksh.
for as_var in ENV MAIL MAILPATH
do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
done
PS1='$ '
PS2='> '
PS4='+ '
# NLS nuisances.
for as_var in \
LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \
LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \
LC_TELEPHONE LC_TIME
do
if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then
eval $as_var=C; export $as_var
else
($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var
fi
done
# Required to use basename.
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then
as_basename=basename
else
as_basename=false
fi
# Name of the executable.
as_me=`$as_basename -- "$0" ||
$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \
X"$0" : 'X\(//\)$' \| \
X"$0" : 'X\(/\)' \| . 2>/dev/null ||
echo X/"$0" |
sed '/^.*\/\([^/][^/]*\)\/*$/{
s//\1/
q
}
/^X\/\(\/\/\)$/{
s//\1/
q
}
/^X\/\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
# CDPATH.
$as_unset CDPATH
as_lineno_1=33559
as_lineno_2=33560
test "x$as_lineno_1" != "x$as_lineno_2" &&
test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || {
# Create $as_me.lineno as a copy of $as_myself, but with 33564
# uniformly replaced by the line number. The first 'sed' inserts a
# line-number line after each line using 33566; the second 'sed'
# does the real work. The second script uses 'N' to pair each
# line-number line with the line containing 33568, and appends
# trailing '-' during substitution so that 33569 is not a special
# case at line end.
# (Raja R Harinath suggested sed '=', and Paul Eggert wrote the
# scripts with optimization help from Paolo Bonzini. Blame Lee
# E. McMahon (1931-1989) for sed's syntax. :-)
sed -n '
p
/[$]LINENO/=
' <$as_myself |
sed '
s/[$]LINENO.*/&-/
t lineno
b
:lineno
N
:loop
s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/
t loop
s/-\n.*//
' >$as_me.lineno &&
chmod +x "$as_me.lineno" ||
{ echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2
{ (exit 1); exit 1; }; }
# Don't try to exec as it changes $[0], causing all sort of problems
# (the dirname of $[0] is not the place where we might find the
# original and so on. Autoconf is especially sensitive to this).
. "./$as_me.lineno"
# Exit status is that of the last command.
exit
}
if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then
as_dirname=dirname
else
as_dirname=false
fi
ECHO_C= ECHO_N= ECHO_T=
case `echo -n x` in
-n*)
case `echo 'x\c'` in
*c*) ECHO_T=' ';; # ECHO_T is single tab character.
*) ECHO_C='\c';;
esac;;
*)
ECHO_N='-n';;
esac
if expr a : '\(a\)' >/dev/null 2>&1 &&
test "X`expr 00001 : '.*\(...\)'`" = X001; then
as_expr=expr
else
as_expr=false
fi
rm -f conf$$ conf$$.exe conf$$.file
if test -d conf$$.dir; then
rm -f conf$$.dir/conf$$.file
else
rm -f conf$$.dir
mkdir conf$$.dir
fi
echo >conf$$.file
if ln -s conf$$.file conf$$ 2>/dev/null; then
as_ln_s='ln -s'
# ... but there are two gotchas:
# 1) On MSYS, both `ln -s file dir' and `ln file dir' fail.
# 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable.
# In both cases, we have to default to `cp -p'.
ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe ||
as_ln_s='cp -p'
elif ln conf$$.file conf$$ 2>/dev/null; then
as_ln_s=ln
else
as_ln_s='cp -p'
fi
rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file
rmdir conf$$.dir 2>/dev/null
if mkdir -p . 2>/dev/null; then
as_mkdir_p=:
else
test -d ./-p && rmdir ./-p
as_mkdir_p=false
fi
if test -x / >/dev/null 2>&1; then
as_test_x='test -x'
else
if ls -dL / >/dev/null 2>&1; then
as_ls_L_option=L
else
as_ls_L_option=
fi
as_test_x='
eval sh -c '\''
if test -d "$1"; then
test -d "$1/.";
else
case $1 in
-*)set "./$1";;
esac;
case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in
???[sx]*):;;*)false;;esac;fi
'\'' sh
'
fi
as_executable_p=$as_test_x
# Sed expression to map a string onto a valid CPP name.
as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'"
# Sed expression to map a string onto a valid variable name.
as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'"
exec 6>&1
# Save the log message, to keep $[0] and so on meaningful, and to
# report actual input values of CONFIG_FILES etc. instead of their
# values after options handling.
ac_log="
This file was extended by $as_me, which was
generated by GNU Autoconf 2.61. Invocation command line was
CONFIG_FILES = $CONFIG_FILES
CONFIG_HEADERS = $CONFIG_HEADERS
CONFIG_LINKS = $CONFIG_LINKS
CONFIG_COMMANDS = $CONFIG_COMMANDS
$ $0 $@
on `(hostname || uname -n) 2>/dev/null | sed 1q`
"
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
# Files that config.status was made for.
config_files="$ac_config_files"
config_headers="$ac_config_headers"
config_commands="$ac_config_commands"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
ac_cs_usage="\
\`$as_me' instantiates files from templates according to the
current configuration.
Usage: $0 [OPTIONS] [FILE]...
-h, --help print this help, then exit
-V, --version print version number and configuration settings, then exit
-q, --quiet do not print progress messages
-d, --debug don't remove temporary files
--recheck update $as_me by reconfiguring in the same conditions
--file=FILE[:TEMPLATE]
instantiate the configuration file FILE
--header=FILE[:TEMPLATE]
instantiate the configuration header FILE
Configuration files:
$config_files
Configuration headers:
$config_headers
Configuration commands:
$config_commands
Report bugs to <bug-autoconf@gnu.org>."
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_cs_version="\\
config.status
configured by $0, generated by GNU Autoconf 2.61,
with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\"
Copyright (C) 2006 Free Software Foundation, Inc.
This config.status script is free software; the Free Software Foundation
gives unlimited permission to copy, distribute and modify it."
ac_pwd='$ac_pwd'
srcdir='$srcdir'
INSTALL='$INSTALL'
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# If no file are specified by the user, then we need to provide default
# value. By we need to know if files were specified by the user.
ac_need_defaults=:
while test $# != 0
do
case $1 in
--*=*)
ac_option=`expr "X$1" : 'X\([^=]*\)='`
ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'`
ac_shift=:
;;
*)
ac_option=$1
ac_optarg=$2
ac_shift=shift
;;
esac
case $ac_option in
# Handling of the options.
-recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
ac_cs_recheck=: ;;
--version | --versio | --versi | --vers | --ver | --ve | --v | -V )
echo "$ac_cs_version"; exit ;;
--debug | --debu | --deb | --de | --d | -d )
debug=: ;;
--file | --fil | --fi | --f )
$ac_shift
CONFIG_FILES="$CONFIG_FILES $ac_optarg"
ac_need_defaults=false;;
--header | --heade | --head | --hea )
$ac_shift
CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg"
ac_need_defaults=false;;
--he | --h)
# Conflict between --help and --header
{ echo "$as_me: error: ambiguous option: $1
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; };;
--help | --hel | -h )
echo "$ac_cs_usage"; exit ;;
-q | -quiet | --quiet | --quie | --qui | --qu | --q \
| -silent | --silent | --silen | --sile | --sil | --si | --s)
ac_cs_silent=: ;;
# This is an error.
-*) { echo "$as_me: error: unrecognized option: $1
Try \`$0 --help' for more information." >&2
{ (exit 1); exit 1; }; } ;;
*) ac_config_targets="$ac_config_targets $1"
ac_need_defaults=false ;;
esac
shift
done
ac_configure_extra_args=
if $ac_cs_silent; then
exec 6>/dev/null
ac_configure_extra_args="$ac_configure_extra_args --silent"
fi
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
if \$ac_cs_recheck; then
echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6
CONFIG_SHELL=$SHELL
export CONFIG_SHELL
exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion
fi
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
exec 5>>config.log
{
echo
sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX
## Running $as_me. ##
_ASBOX
echo "$ac_log"
} >&5
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
#
# INIT-COMMANDS
#
AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# Handling of arguments.
for ac_config_target in $ac_config_targets
do
case $ac_config_target in
"config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;;
"depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;;
"Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;;
"doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;;
"doc/en/Makefile") CONFIG_FILES="$CONFIG_FILES doc/en/Makefile" ;;
"po/Makefile") CONFIG_FILES="$CONFIG_FILES po/Makefile" ;;
"src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;;
*) { { echo "$as_me:33867: error: invalid argument: $ac_config_target" >&5
echo "$as_me: error: invalid argument: $ac_config_target" >&2;}
{ (exit 1); exit 1; }; };;
esac
done
# If the user did not use the arguments to specify the items to instantiate,
# then the envvar interface is used. Set only those that are not.
# We use the long form for the default assignment because of an extremely
# bizarre bug on SunOS 4.1.3.
if $ac_need_defaults; then
test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files
test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers
test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands
fi
# Have a temporary directory for convenience. Make it in the build tree
# simply because there is no reason against having it here, and in addition,
# creating and moving files from /tmp can sometimes cause problems.
# Hook for its removal unless debugging.
# Note that there is a small window in which the directory will not be cleaned:
# after its creation but before its name has been assigned to `$tmp'.
$debug ||
{
tmp=
trap 'exit_status=$?
{ test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status
' 0
trap '{ (exit 1); exit 1; }' 1 2 13 15
}
# Create a (secure) tmp directory for tmp files.
{
tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` &&
test -n "$tmp" && test -d "$tmp"
} ||
{
tmp=./conf$$-$RANDOM
(umask 077 && mkdir "$tmp")
} ||
{
echo "$me: cannot create a temporary directory in ." >&2
{ (exit 1); exit 1; }
}
#
# Set up the sed scripts for CONFIG_FILES section.
#
# No need to generate the scripts if there are no CONFIG_FILES.
# This happens for instance when ./config.status config.h
if test -n "$CONFIG_FILES"; then
_ACEOF
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
SHELL!$SHELL$ac_delim
PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim
PACKAGE_NAME!$PACKAGE_NAME$ac_delim
PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim
PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim
PACKAGE_STRING!$PACKAGE_STRING$ac_delim
PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim
exec_prefix!$exec_prefix$ac_delim
prefix!$prefix$ac_delim
program_transform_name!$program_transform_name$ac_delim
bindir!$bindir$ac_delim
sbindir!$sbindir$ac_delim
libexecdir!$libexecdir$ac_delim
datarootdir!$datarootdir$ac_delim
datadir!$datadir$ac_delim
sysconfdir!$sysconfdir$ac_delim
sharedstatedir!$sharedstatedir$ac_delim
localstatedir!$localstatedir$ac_delim
includedir!$includedir$ac_delim
oldincludedir!$oldincludedir$ac_delim
docdir!$docdir$ac_delim
infodir!$infodir$ac_delim
htmldir!$htmldir$ac_delim
dvidir!$dvidir$ac_delim
pdfdir!$pdfdir$ac_delim
psdir!$psdir$ac_delim
libdir!$libdir$ac_delim
localedir!$localedir$ac_delim
mandir!$mandir$ac_delim
DEFS!$DEFS$ac_delim
ECHO_C!$ECHO_C$ac_delim
ECHO_N!$ECHO_N$ac_delim
ECHO_T!$ECHO_T$ac_delim
LIBS!$LIBS$ac_delim
build_alias!$build_alias$ac_delim
host_alias!$host_alias$ac_delim
target_alias!$target_alias$ac_delim
build!$build$ac_delim
build_cpu!$build_cpu$ac_delim
build_vendor!$build_vendor$ac_delim
build_os!$build_os$ac_delim
host!$host$ac_delim
host_cpu!$host_cpu$ac_delim
host_vendor!$host_vendor$ac_delim
host_os!$host_os$ac_delim
target!$target$ac_delim
target_cpu!$target_cpu$ac_delim
target_vendor!$target_vendor$ac_delim
target_os!$target_os$ac_delim
INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim
INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim
INSTALL_DATA!$INSTALL_DATA$ac_delim
CYGPATH_W!$CYGPATH_W$ac_delim
PACKAGE!$PACKAGE$ac_delim
VERSION!$VERSION$ac_delim
ACLOCAL!$ACLOCAL$ac_delim
AUTOCONF!$AUTOCONF$ac_delim
AUTOMAKE!$AUTOMAKE$ac_delim
AUTOHEADER!$AUTOHEADER$ac_delim
MAKEINFO!$MAKEINFO$ac_delim
install_sh!$install_sh$ac_delim
STRIP!$STRIP$ac_delim
INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim
mkdir_p!$mkdir_p$ac_delim
AWK!$AWK$ac_delim
SET_MAKE!$SET_MAKE$ac_delim
am__leading_dot!$am__leading_dot$ac_delim
AMTAR!$AMTAR$ac_delim
am__tar!$am__tar$ac_delim
am__untar!$am__untar$ac_delim
KDECONFIG!$KDECONFIG$ac_delim
kde_libs_prefix!$kde_libs_prefix$ac_delim
kde_libs_htmldir!$kde_libs_htmldir$ac_delim
CONF_FILES!$CONF_FILES$ac_delim
CC!$CC$ac_delim
CFLAGS!$CFLAGS$ac_delim
LDFLAGS!$LDFLAGS$ac_delim
CPPFLAGS!$CPPFLAGS$ac_delim
ac_ct_CC!$ac_ct_CC$ac_delim
EXEEXT!$EXEEXT$ac_delim
OBJEXT!$OBJEXT$ac_delim
DEPDIR!$DEPDIR$ac_delim
am__include!$am__include$ac_delim
am__quote!$am__quote$ac_delim
AMDEP_TRUE!$AMDEP_TRUE$ac_delim
AMDEP_FALSE!$AMDEP_FALSE$ac_delim
AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim
CCDEPMODE!$CCDEPMODE$ac_delim
am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim
am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim
CPP!$CPP$ac_delim
CXX!$CXX$ac_delim
CXXFLAGS!$CXXFLAGS$ac_delim
ac_ct_CXX!$ac_ct_CXX$ac_delim
CXXDEPMODE!$CXXDEPMODE$ac_delim
am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim
am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
break
elif $ac_last_try; then
{ { echo "$as_me:34030: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
{ (exit 1); exit 1; }; }
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
ac_eof=`expr $ac_eof + 1`
fi
cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
CEOF$ac_eof
_ACEOF
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
WOVERLOADED_VIRTUAL!$WOVERLOADED_VIRTUAL$ac_delim
HAVE_GCC_VISIBILITY!$HAVE_GCC_VISIBILITY$ac_delim
unsermake_enable_pch_TRUE!$unsermake_enable_pch_TRUE$ac_delim
unsermake_enable_pch_FALSE!$unsermake_enable_pch_FALSE$ac_delim
USE_EXCEPTIONS!$USE_EXCEPTIONS$ac_delim
USE_RTTI!$USE_RTTI$ac_delim
CXXCPP!$CXXCPP$ac_delim
NOOPT_CXXFLAGS!$NOOPT_CXXFLAGS$ac_delim
NOOPT_CFLAGS!$NOOPT_CFLAGS$ac_delim
ENABLE_PERMISSIVE_FLAG!$ENABLE_PERMISSIVE_FLAG$ac_delim
LDFLAGS_AS_NEEDED!$LDFLAGS_AS_NEEDED$ac_delim
LDFLAGS_NEW_DTAGS!$LDFLAGS_NEW_DTAGS$ac_delim
KDE_USE_FINAL_TRUE!$KDE_USE_FINAL_TRUE$ac_delim
KDE_USE_FINAL_FALSE!$KDE_USE_FINAL_FALSE$ac_delim
KDE_USE_CLOSURE_TRUE!$KDE_USE_CLOSURE_TRUE$ac_delim
KDE_USE_CLOSURE_FALSE!$KDE_USE_CLOSURE_FALSE$ac_delim
KDE_NO_UNDEFINED!$KDE_NO_UNDEFINED$ac_delim
KDE_USE_NMCHECK_TRUE!$KDE_USE_NMCHECK_TRUE$ac_delim
KDE_USE_NMCHECK_FALSE!$KDE_USE_NMCHECK_FALSE$ac_delim
GREP!$GREP$ac_delim
EGREP!$EGREP$ac_delim
LN_S!$LN_S$ac_delim
ECHO!$ECHO$ac_delim
AR!$AR$ac_delim
RANLIB!$RANLIB$ac_delim
F77!$F77$ac_delim
FFLAGS!$FFLAGS$ac_delim
ac_ct_F77!$ac_ct_F77$ac_delim
LIBTOOL!$LIBTOOL$ac_delim
KDE_PLUGIN!$KDE_PLUGIN$ac_delim
KDE_CHECK_PLUGIN!$KDE_CHECK_PLUGIN$ac_delim
MSGFMT!$MSGFMT$ac_delim
GMSGFMT!$GMSGFMT$ac_delim
XGETTEXT!$XGETTEXT$ac_delim
LIBUTIL!$LIBUTIL$ac_delim
LIBCOMPAT!$LIBCOMPAT$ac_delim
LIBCRYPT!$LIBCRYPT$ac_delim
LIBRESOLV!$LIBRESOLV$ac_delim
LIB_POLL!$LIB_POLL$ac_delim
FRAMEWORK_COREAUDIO!$FRAMEWORK_COREAUDIO$ac_delim
LIBSOCKET!$LIBSOCKET$ac_delim
X_EXTRA_LIBS!$X_EXTRA_LIBS$ac_delim
LIBUCB!$LIBUCB$ac_delim
LIBDL!$LIBDL$ac_delim
KDE_USE_FPIE!$KDE_USE_FPIE$ac_delim
KDE_USE_PIE!$KDE_USE_PIE$ac_delim
include_x11_TRUE!$include_x11_TRUE$ac_delim
include_x11_FALSE!$include_x11_FALSE$ac_delim
XMKMF!$XMKMF$ac_delim
X_PRE_LIBS!$X_PRE_LIBS$ac_delim
LIB_X11!$LIB_X11$ac_delim
LIB_XRENDER!$LIB_XRENDER$ac_delim
LIBSM!$LIBSM$ac_delim
X_INCLUDES!$X_INCLUDES$ac_delim
X_LDFLAGS!$X_LDFLAGS$ac_delim
x_includes!$x_includes$ac_delim
x_libraries!$x_libraries$ac_delim
QTE_NORTTI!$QTE_NORTTI$ac_delim
LIB_XEXT!$LIB_XEXT$ac_delim
LIBPTHREAD!$LIBPTHREAD$ac_delim
USE_THREADS!$USE_THREADS$ac_delim
KDE_MT_LDFLAGS!$KDE_MT_LDFLAGS$ac_delim
KDE_MT_LIBS!$KDE_MT_LIBS$ac_delim
USER_INCLUDES!$USER_INCLUDES$ac_delim
USER_LDFLAGS!$USER_LDFLAGS$ac_delim
LIBZ!$LIBZ$ac_delim
LIBPNG!$LIBPNG$ac_delim
LIBJPEG!$LIBJPEG$ac_delim
qt_libraries!$qt_libraries$ac_delim
qt_includes!$qt_includes$ac_delim
QT_INCLUDES!$QT_INCLUDES$ac_delim
QT_LDFLAGS!$QT_LDFLAGS$ac_delim
PERL!$PERL$ac_delim
MOC!$MOC$ac_delim
UIC!$UIC$ac_delim
UIC_TR!$UIC_TR$ac_delim
LIB_QT!$LIB_QT$ac_delim
LIB_QPE!$LIB_QPE$ac_delim
kde_qtver!$kde_qtver$ac_delim
KDE_EXTRA_RPATH!$KDE_EXTRA_RPATH$ac_delim
KDE_RPATH!$KDE_RPATH$ac_delim
X_RPATH!$X_RPATH$ac_delim
kde_libraries!$kde_libraries$ac_delim
kde_includes!$kde_includes$ac_delim
KDE_LDFLAGS!$KDE_LDFLAGS$ac_delim
KDE_INCLUDES!$KDE_INCLUDES$ac_delim
all_includes!$all_includes$ac_delim
all_libraries!$all_libraries$ac_delim
AUTODIRS!$AUTODIRS$ac_delim
include_ARTS_TRUE!$include_ARTS_TRUE$ac_delim
include_ARTS_FALSE!$include_ARTS_FALSE$ac_delim
MAKEKDEWIDGETS!$MAKEKDEWIDGETS$ac_delim
KCONFIG_COMPILER!$KCONFIG_COMPILER$ac_delim
KCFG_DEPENDENCIES!$KCFG_DEPENDENCIES$ac_delim
DCOPIDLNG!$DCOPIDLNG$ac_delim
DCOPIDL!$DCOPIDL$ac_delim
DCOPIDL2CPP!$DCOPIDL2CPP$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then
break
elif $ac_last_try; then
{ { echo "$as_me:34168: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
{ (exit 1); exit 1; }; }
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
ac_eof=`expr $ac_eof + 1`
fi
cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
CEOF$ac_eof
_ACEOF
ac_delim='%!_!# '
for ac_last_try in false false false false false :; do
cat >conf$$subs.sed <<_ACEOF
DCOP_DEPENDENCIES!$DCOP_DEPENDENCIES$ac_delim
MCOPIDL!$MCOPIDL$ac_delim
ARTSCCONFIG!$ARTSCCONFIG$ac_delim
MEINPROC!$MEINPROC$ac_delim
KDE_XSL_STYLESHEET!$KDE_XSL_STYLESHEET$ac_delim
XMLLINT!$XMLLINT$ac_delim
kde_htmldir!$kde_htmldir$ac_delim
kde_appsdir!$kde_appsdir$ac_delim
kde_icondir!$kde_icondir$ac_delim
kde_sounddir!$kde_sounddir$ac_delim
kde_datadir!$kde_datadir$ac_delim
kde_locale!$kde_locale$ac_delim
kde_confdir!$kde_confdir$ac_delim
kde_kcfgdir!$kde_kcfgdir$ac_delim
kde_mimedir!$kde_mimedir$ac_delim
kde_wallpaperdir!$kde_wallpaperdir$ac_delim
kde_bindir!$kde_bindir$ac_delim
xdg_appsdir!$xdg_appsdir$ac_delim
xdg_menudir!$xdg_menudir$ac_delim
xdg_directorydir!$xdg_directorydir$ac_delim
kde_templatesdir!$kde_templatesdir$ac_delim
kde_servicesdir!$kde_servicesdir$ac_delim
kde_servicetypesdir!$kde_servicetypesdir$ac_delim
kde_moduledir!$kde_moduledir$ac_delim
kdeinitdir!$kdeinitdir$ac_delim
kde_styledir!$kde_styledir$ac_delim
kde_widgetdir!$kde_widgetdir$ac_delim
LIB_KDED!$LIB_KDED$ac_delim
LIB_KDECORE!$LIB_KDECORE$ac_delim
LIB_KDEUI!$LIB_KDEUI$ac_delim
LIB_KIO!$LIB_KIO$ac_delim
LIB_KJS!$LIB_KJS$ac_delim
LIB_SMB!$LIB_SMB$ac_delim
LIB_KAB!$LIB_KAB$ac_delim
LIB_KABC!$LIB_KABC$ac_delim
LIB_KHTML!$LIB_KHTML$ac_delim
LIB_KSPELL!$LIB_KSPELL$ac_delim
LIB_KPARTS!$LIB_KPARTS$ac_delim
LIB_KDEPRINT!$LIB_KDEPRINT$ac_delim
LIB_KUTILS!$LIB_KUTILS$ac_delim
LIB_KDEPIM!$LIB_KDEPIM$ac_delim
LIB_KIMPROXY!$LIB_KIMPROXY$ac_delim
LIB_KNEWSTUFF!$LIB_KNEWSTUFF$ac_delim
LIB_KDNSSD!$LIB_KDNSSD$ac_delim
LIB_KUNITTEST!$LIB_KUNITTEST$ac_delim
LIB_KSYCOCA!$LIB_KSYCOCA$ac_delim
LIB_KFILE!$LIB_KFILE$ac_delim
LIB_KFM!$LIB_KFM$ac_delim
TOPSUBDIRS!$TOPSUBDIRS$ac_delim
LIBOBJS!$LIBOBJS$ac_delim
LTLIBOBJS!$LTLIBOBJS$ac_delim
_ACEOF
if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 51; then
break
elif $ac_last_try; then
{ { echo "$as_me:34260: error: could not make $CONFIG_STATUS" >&5
echo "$as_me: error: could not make $CONFIG_STATUS" >&2;}
{ (exit 1); exit 1; }; }
else
ac_delim="$ac_delim!$ac_delim _$ac_delim!! "
fi
done
ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed`
if test -n "$ac_eof"; then
ac_eof=`echo "$ac_eof" | sort -nru | sed 1q`
ac_eof=`expr $ac_eof + 1`
fi
cat >>$CONFIG_STATUS <<_ACEOF
cat >"\$tmp/subs-3.sed" <<\CEOF$ac_eof
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end
_ACEOF
sed '
s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g
s/^/s,@/; s/!/@,|#_!!_#|/
:n
t n
s/'"$ac_delim"'$/,g/; t
s/$/\\/; p
N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n
' >>$CONFIG_STATUS <conf$$subs.sed
rm -f conf$$subs.sed
cat >>$CONFIG_STATUS <<_ACEOF
:end
s/|#_!!_#|//g
CEOF$ac_eof
_ACEOF
# VPATH may cause trouble with some makes, so we remove $(srcdir),
# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and
# trailing colons and then remove the whole line if VPATH becomes empty
# (actually we leave an empty line to preserve line numbers).
if test "x$srcdir" = x.; then
ac_vpsub='/^[ ]*VPATH[ ]*=/{
s/:*\$(srcdir):*/:/
s/:*\${srcdir}:*/:/
s/:*@srcdir@:*/:/
s/^\([^=]*=[ ]*\):*/\1/
s/:*$//
s/^[^=]*=[ ]*$//
}'
fi
cat >>$CONFIG_STATUS <<\_ACEOF
fi # test -n "$CONFIG_FILES"
for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS
do
case $ac_tag in
:[FHLC]) ac_mode=$ac_tag; continue;;
esac
case $ac_mode$ac_tag in
:[FHL]*:*);;
:L* | :C*:*) { { echo "$as_me:34321: error: Invalid tag $ac_tag." >&5
echo "$as_me: error: Invalid tag $ac_tag." >&2;}
{ (exit 1); exit 1; }; };;
:[FH]-) ac_tag=-:-;;
:[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
esac
ac_save_IFS=$IFS
IFS=:
set x $ac_tag
IFS=$ac_save_IFS
shift
ac_file=$1
shift
case $ac_mode in
:L) ac_source=$1;;
:[FH])
ac_file_inputs=
for ac_f
do
case $ac_f in
-) ac_f="$tmp/stdin";;
*) # Look for the file first in the build tree, then in the source tree
# (if the path is not absolute). The absolute path cannot be DOS-style,
# because $ac_f cannot contain `:'.
test -f "$ac_f" ||
case $ac_f in
[\\/$]*) false;;
*) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
esac ||
{ { echo "$as_me:34351: error: cannot find input file: $ac_f" >&5
echo "$as_me: error: cannot find input file: $ac_f" >&2;}
{ (exit 1); exit 1; }; };;
esac
ac_file_inputs="$ac_file_inputs $ac_f"
done
# Let's still pretend it is `configure' which instantiates (i.e., don't
# use $as_me), people would be surprised to read:
# /* config.h. Generated by config.status. */
configure_input="Generated from "`IFS=:
echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure."
if test x"$ac_file" != x-; then
configure_input="$ac_file. $configure_input"
{ echo "$as_me:34365: creating $ac_file" >&5
echo "$as_me: creating $ac_file" >&6;}
fi
case $ac_tag in
*:-:* | *:-) cat >"$tmp/stdin";;
esac
;;
esac
ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$ac_file" : 'X\(//\)[^/]' \| \
X"$ac_file" : 'X\(//\)$' \| \
X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$ac_file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
{ as_dir="$ac_dir"
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || { { echo "$as_me:34436: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
ac_builddir=.
case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'`
# A ".." for each directory in $ac_dir_suffix.
ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'`
case $ac_top_builddir_sub in
"") ac_top_builddir_sub=. ac_top_build_prefix= ;;
*) ac_top_build_prefix=$ac_top_builddir_sub/ ;;
esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix
case $srcdir in
.) # We are building in place.
ac_srcdir=.
ac_top_srcdir=$ac_top_builddir_sub
ac_abs_top_srcdir=$ac_pwd ;;
[\\/]* | ?:[\\/]* ) # Absolute name.
ac_srcdir=$srcdir$ac_dir_suffix;
ac_top_srcdir=$srcdir
ac_abs_top_srcdir=$srcdir ;;
*) # Relative name.
ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
ac_top_srcdir=$ac_top_build_prefix$srcdir
ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix
case $ac_mode in
:F)
#
# CONFIG_FILE
#
case $INSTALL in
[\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
*) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
esac
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
case `sed -n '/datarootdir/ {
p
q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p
' $ac_file_inputs` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
{ echo "$as_me:34503: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF
ac_datarootdir_hack='
s&@datadir@&$datadir&g
s&@docdir@&$docdir&g
s&@infodir@&$infodir&g
s&@localedir@&$localedir&g
s&@mandir@&$mandir&g
s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF
# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF
sed "$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s&@configure_input@&$configure_input&;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
$ac_datarootdir_hack
" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" | sed -f "$tmp/subs-3.sed" >$tmp/out
test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
{ ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } &&
{ ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } &&
{ echo "$as_me:34543: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&5
echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined. Please make sure it is defined." >&2;}
rm -f "$tmp/stdin"
case $ac_file in
-) cat "$tmp/out"; rm -f "$tmp/out";;
*) rm -f "$ac_file"; mv "$tmp/out" $ac_file;;
esac
;;
:H)
#
# CONFIG_HEADER
#
_ACEOF
# Transform confdefs.h into a sed script `conftest.defines', that
# substitutes the proper values into config.h.in to produce config.h.
rm -f conftest.defines conftest.tail
# First, append a space to every undef/define line, to ease matching.
echo 's/$/ /' >conftest.defines
# Then, protect against being on the right side of a sed subst, or in
# an unquoted here document, in config.status. If some macros were
# called several times there might be several #defines for the same
# symbol, which is useless. But do not sort them, since the last
# AC_DEFINE must be honored.
ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]*
# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where
# NAME is the cpp macro being defined, VALUE is the value it is being given.
# PARAMS is the parameter list in the macro definition--in most cases, it's
# just an empty string.
ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*'
ac_dB='\\)[ (].*,\\1define\\2'
ac_dC=' '
ac_dD=' ,'
uniq confdefs.h |
sed -n '
t rset
:rset
s/^[ ]*#[ ]*define[ ][ ]*//
t ok
d
:ok
s/[\\&,]/\\&/g
s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p
s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p
' >>conftest.defines
# Remove the space that was appended to ease matching.
# Then replace #undef with comments. This is necessary, for
# example, in the case of _POSIX_SOURCE, which is predefined and required
# on some systems where configure will not decide to define it.
# (The regexp can be short, since the line contains either #define or #undef.)
echo 's/ $//
s,^[ #]*u.*,/* & */,' >>conftest.defines
# Break up conftest.defines:
ac_max_sed_lines=50
# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1"
# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2"
# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1"
# et cetera.
ac_in='$ac_file_inputs'
ac_out='"$tmp/out1"'
ac_nxt='"$tmp/out2"'
while :
do
# Write a here document:
cat >>$CONFIG_STATUS <<_ACEOF
# First, check the format of the line:
cat >"\$tmp/defines.sed" <<\\CEOF
/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def
/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def
b
:def
_ACEOF
sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS
echo 'CEOF
sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS
ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in
sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail
grep . conftest.tail >/dev/null || break
rm -f conftest.defines
mv conftest.tail conftest.defines
done
rm -f conftest.defines conftest.tail
echo "ac_result=$ac_in" >>$CONFIG_STATUS
cat >>$CONFIG_STATUS <<\_ACEOF
if test x"$ac_file" != x-; then
echo "/* $configure_input */" >"$tmp/config.h"
cat "$ac_result" >>"$tmp/config.h"
if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then
{ echo "$as_me:34640: $ac_file is unchanged" >&5
echo "$as_me: $ac_file is unchanged" >&6;}
else
rm -f $ac_file
mv "$tmp/config.h" $ac_file
fi
else
echo "/* $configure_input */"
cat "$ac_result"
fi
rm -f "$tmp/out12"
# Compute $ac_file's index in $config_headers.
_am_stamp_count=1
for _am_header in $config_headers :; do
case $_am_header in
$ac_file | $ac_file:* )
break ;;
* )
_am_stamp_count=`expr $_am_stamp_count + 1` ;;
esac
done
echo "timestamp for $ac_file" >`$as_dirname -- $ac_file ||
$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X$ac_file : 'X\(//\)[^/]' \| \
X$ac_file : 'X\(//\)$' \| \
X$ac_file : 'X\(/\)' \| . 2>/dev/null ||
echo X$ac_file |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`/stamp-h$_am_stamp_count
;;
:C) { echo "$as_me:34686: executing $ac_file commands" >&5
echo "$as_me: executing $ac_file commands" >&6;}
;;
esac
case $ac_file$ac_mode in
"depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do
# Strip MF so we end up with the name of the file.
mf=`echo "$mf" | sed -e 's/:.*$//'`
# Check whether this is an Automake generated Makefile or not.
# We used to match only the files named `Makefile.in', but
# some people rename them; so instead we look at the file content.
# Grep'ing the first line is not enough: some people post-process
# each Makefile.in and add a new line on top of each file to say so.
# So let's grep whole file.
if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then
dirpart=`$as_dirname -- "$mf" ||
$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$mf" : 'X\(//\)[^/]' \| \
X"$mf" : 'X\(//\)$' \| \
X"$mf" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$mf" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
else
continue
fi
# Extract the definition of DEPDIR, am__include, and am__quote
# from the Makefile without running `make'.
DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
test -z "$DEPDIR" && continue
am__include=`sed -n 's/^am__include = //p' < "$mf"`
test -z "am__include" && continue
am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
# When using ansi2knr, U may be empty or an underscore; expand it
U=`sed -n 's/^U = //p' < "$mf"`
# Find all dependency output files, they are included files with
# $(DEPDIR) in their names. We invoke sed twice because it is the
# simplest approach to changing $(DEPDIR) to its actual value in the
# expansion.
for file in `sed -n "
s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
# Make sure the directory exists.
test -f "$dirpart/$file" && continue
fdir=`$as_dirname -- "$file" ||
$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$file" : 'X\(//\)[^/]' \| \
X"$file" : 'X\(//\)$' \| \
X"$file" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$file" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
{ as_dir=$dirpart/$fdir
case $as_dir in #(
-*) as_dir=./$as_dir;;
esac
test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || {
as_dirs=
while :; do
case $as_dir in #(
*\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #(
*) as_qdir=$as_dir;;
esac
as_dirs="'$as_qdir' $as_dirs"
as_dir=`$as_dirname -- "$as_dir" ||
$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$as_dir" : 'X\(//\)[^/]' \| \
X"$as_dir" : 'X\(//\)$' \| \
X"$as_dir" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$as_dir" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'`
test -d "$as_dir" && break
done
test -z "$as_dirs" || eval "mkdir $as_dirs"
} || test -d "$as_dir" || { { echo "$as_me:34808: error: cannot create directory $as_dir" >&5
echo "$as_me: error: cannot create directory $as_dir" >&2;}
{ (exit 1); exit 1; }; }; }
# echo "creating $dirpart/$file"
echo '# dummy' > "$dirpart/$file"
done
done
;;
esac
done # for ac_tag
{ (exit 0); exit 0; }
_ACEOF
if test "x$with_fast_perl" = "xyes"; then
perl -i.bak $ac_aux_dir/conf.change.pl $CONFIG_STATUS \
|| mv $CONFIG_STATUS.bak $CONFIG_STATUS
rm -f $CONFIG_STATUS.bak
fi
chmod +x $CONFIG_STATUS
ac_clean_files=$ac_clean_files_save
# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded. So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status. When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
ac_cs_success=:
ac_config_status_args=
test "$silent" = yes &&
ac_config_status_args="$ac_config_status_args --quiet"
exec 5>/dev/null
$SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
exec 5>>config.log
# Use ||, not &&, to avoid exiting from the if with $? = 1, which
# would make configure fail if this is the last instruction.
$ac_cs_success || { (exit 1); exit 1; }
fi
# Check if KDE_SET_PREFIX was called, and --prefix was passed to configure
if test -n "$kde_libs_prefix" -a -n "$given_prefix"; then
# And if so, warn when they don't match
if test "$kde_libs_prefix" != "$given_prefix"; then
# And if kde doesn't know about the prefix yet
echo ":"`kde-config --path exe`":" | grep ":$given_prefix/bin/:" 2>&1 >/dev/null
if test $? -ne 0; then
echo ""
echo "Warning: you chose to install this package in $given_prefix,"
echo "but KDE was found in $kde_libs_prefix."
echo "For this to work, you will need to tell KDE about the new prefix, by ensuring"
echo "that KDEDIRS contains it, e.g. export KDEDIRS=$given_prefix:$kde_libs_prefix"
echo "Then restart KDE."
echo ""
fi
fi
fi
if test x$GXX = "xyes" -a x$kde_have_gcc_visibility = "xyes" -a x$kde_cv_val_qt_gcc_visibility_patched = "xno"; then
echo ""
echo "Your GCC supports symbol visibility, but the patch for Qt supporting visibility"
echo "was not included. Therefore, GCC symbol visibility support remains disabled."
echo ""
echo "For better performance, consider including the Qt visibility supporting patch"
echo "located at:"
echo ""
echo "http://bugs.kde.org/show_bug.cgi?id=109386"
echo ""
echo "and recompile all of Qt and KDE. Note, this is entirely optional and"
echo "everything will continue to work just fine without it."
echo ""
fi
if test "$all_tests" = "bad"; then
if test ! "$cache_file" = "/dev/null"; then
echo ""
echo "Please remove the file $cache_file after changing your setup"
echo "so that configure will find the changes next time."
echo ""
fi
else
echo ""
echo "Good - your configure finished. Start make now"
echo ""
fi